Chauvet Abyss Led User manual

3000 N 29th Ct, Hollywood, FL 33020 U.S.A.
[phone] –[phone]
FAX [phone]
www.chauvetlighting.com
User Manual
Snapshot
Use on Dimmer
Outdoor Use
Sound Activated
DMX 512
Master/Slave
115/230V Power Switch
Replaceable Fuse
User Serviceable
Duty Cycle

Abyss™LED User Manual –Rev. 03e a 6/1/2009 11:15 AM
Table of Contents
1. BEFORE YOU BEGIN............................................................................................................................................................1
WHAT IS INCLUDED ...................................................................................................................................................................... 1
UNPACKING INSTRUCTIONS ........................................................................................................................................................... 1
SYMBOLS ................................................................................................................................................................................... 1
AC POWER ................................................................................................................................................................................ 1
SAFETY INSTRUCTIONS................................................................................................................................................................. 2
2. INTRODUCTION ....................................................................................................................................................................2
FEATURES.................................................................................................................................................................................. 2
PRODUCT OVERVIEW ................................................................................................................................................................... 3
3. SETUP ....................................................................................................................................................................................4
FUSE REPLACEMENT ................................................................................................................................................................... 4
MOUNTING ................................................................................................................................................................................. 4
Orientation..........................................................................................................................................................................4
Rigging...............................................................................................................................................................................4
4. OPERATING INSTRUCTIONS..............................................................................................................................................5
OPERATION MODES ..................................................................................................................................................................... 5
GENERAL TROUBLESHOOTING ....................................................................................................................................................... 5
CONTACT US.............................................................................................................................................................................. 6
5. APPENDIX..............................................................................................................................................................................6
GENERAL MAINTENANCE .............................................................................................................................................................. 6
RETURNS PROCEDURE................................................................................................................................................................. 7
CLAIMS ...................................................................................................................................................................................... 7
TECHNICAL SPECIFICATIONS ......................................................................................................................................................... 8

Abyss™LED User Manual 1 6/1/2009 11:15 AM
Figure 1 - AC Voltage Switch
Not all fixtures have a
voltage select switch.
Please be sure to connect
to the proper voltage.
1. BEFORE YOU BEGIN
What is included
1 x Abyss™LED
1 x Power Cord
1 x Warranty Card
1 x User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that
all parts are present, and have arrived in good condition. Notify the shipper immediately and retain
the packing material for inspection if any parts appear damaged from shipping or the carton shows
signs of mishandling. Save thecarton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and
packing.
Symbols
This paragraph contains critical installation, configuration or operation information. Failure to comply
with this information may render the system partially or completely inoperative, cause damage to the
system or cause harm to the operator/user/technician
This paragraph contains important installation or configuration information. Failure to comply with this
information may prevent the system from functioning correctly.
This paragraph reminds you of useful, although not critical, information.
AC Power
Verify that the voltage select switch on your unit matches the line voltage applied. Damage to
your fixture may result if the line voltage applied does not match the voltage indicated on the
voltage selector switch.
Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used only as a
0% to 100% switch.
To determine the power requirements for a particular fixture, see the label
affixed to the back plate of the fixture or refer to the fixture’s specifications
chart. A fixture’s listed current rating indicates its average current draw under
normal conditions.
Before applying power to a fixture, check that the source voltage matches the
fixture’s requirement. Check the fixture or device carefully to make sure that if
a voltage selection switch exists, it is set to the correct line voltage you will
use.
Always connect the fixture to a circuit with a suitable electrical ground.

Abyss™LED User Manual 2 6/1/2009 11:15 AM
Safety Instructions
Please read these instructions carefully, which includesimportant information
about the installation, usage and maintenance of this product.
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure
that they also receive this instruction booklet.
This product is for indoor use only! To prevent risk of fire or shock, do not expose fixture to rain
or moisture.
Make sure there are no flammable materials close to the unit while operating.
Secure fixture to fastening device, using a safety chain.
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures
higher than this.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center.
Make sure the power cord is not crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid direct eye exposure to the light source while it is on.
There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs. In the unlikely event that your unit may require service, please
contact CHAUVET at 954-929-1115.
2. INTRODUCTION
Features
Simulated rippling water effect
4 constantly changing dichroic colors
Stop effect on a color
Adjustable ripple speed
High-power, 22W (1,360mA) LED
Additional power output: max 50 units @ 120V

Abyss™LED User Manual 3 6/1/2009 11:15 AM
Product Overview
Fuse holder
Safety
eyebolt
Power out
Voltage
selection
switch
Power in
Color rotation
on/off switch
Rotation speed
Hanging bracket
Bracket
adjustment
knob (1 of 2)
Light output

Abyss™LED User Manual 4 6/1/2009 11:15 AM
The fuse is located
inside this
compartment.
Remove using a flat
head screwdriver.
Hanging Clamp
3. SETUP
Fuse Replacement
Disconnect the power cord before replacing a fuse and always replace with the
same type of fuse.
With a flat head screwdriver, wedge the fuse
holder out of its housing. Remove the blown
fuse from its holder and replace with the exact
same type of fuse. Insert the fuse holder back
in its place and reconnect power.
Mounting
Orientation
This fixture may be mounted in any safe position.
Rigging
It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O”
type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding
the desired position, retighten both knobs.
When selecting an installation location, consider ease of access to the unit for operation and
routine maintenance.
Always use safety cables.
Never mount the unit in places where it may be exposed to
rain, high humidity, extreme temperature changes or restricted
ventilation.
The clamp is sold separately

Abyss™LED User Manual 5 6/1/2009 11:15 AM
4. OPERATING INSTRUCTIONS
Operation Modes
The unit operates in standalone mode. There is an on/off switch for the color rotation, as well as a rotation
speed adjustment for the water effect.
CONTROL FUNCTION
DESCRIPTION
On/Off Switch
Turns the color rotation on/off (may stop at any position,
including split colors)
Rotation speed knob
Adjusts the speed of the water effect from slow to fast
Note! The on/off switch is only for color rotation. It will not turn the off the fixture.
Note! At higher rotation speeds, the operation noise may increase from the fixture.
This is normal.
General Troubleshooting
Symptom
Solution(s)
Applies to
Lights
Foggers &
Snow
Controllers
Dimmers &
Chaser
Beam is very dim or not
bright
Clean optical system or replace lamp
Check 230/115 V switch for proper setting

Breaker/Fuse keeps
blowing
Check total load placed on device

Device has no power
Check for power on Mains.
Check device’s fuse. (internal and/or external)



Fixture is on but there
is no movement to the
audio
Make sure you have the correct audio mode on
the control switches. If audio provided via ¼” jack,
make sure a live audio signal exists
Adjust sound sensitivity knob



Moves slow
Check 230/115 V switch for proper setting

If you still have a problem after trying the above solutions, please contact CHAUVET Technical
Support at the location on the next page.

Abyss™LED User Manual 6 6/1/2009 11:15 AM
Contact Us
World Wide
General Information CHAUVET
3000 North 29th Court
Hollywood, FL 33020
voice: 954.929.1115
fax: [phone]
toll free: 800.762.1084
Technical Support CHAUVET
3000 North 29th Court
Hollywood, FL 33020
voice: 954.929.1115 (Press 4)
fax: [phone] (Attention: Service)
World Wide Web www.chauvetlighting.com
5. APPENDIX
General Maintenance
To maintain optimum performance and minimize wear, fixtures should be cleaned frequently. Usage
and environment are contributing factors in determining the cleaning frequency. As a general rule,
fixtures should be cleaned at least twice a month. Dust build up reduces light output performance and
can cause overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure
to power off fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust
collected on external vents and internal components. Clean all glass surfaces when the fixture is cold
with a mild solution of glass cleaner or Isopropyl Alcohol and a soft lint-free cotton cloth or lens tissue.
Apply solution to thecloth or tissue and drag dirt and grime to the outside of the lens. Gently polish
optical surfaces until they are free of haze and lint.
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates:
damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s
optics. Clean with soft cloth using normal glass cleaning fluid. Always dry the parts carefully. Clean
the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.

Abyss™LED User Manual 7 6/1/2009 11:15 AM
Returns Procedure
Returned merchandise must be sent prepaid and in the original packing; call tags will not be issued.
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #).
Products returned without an RMA # will be refused. Call CHAUVET and request an RMA #, prior to
shipping the fixture. Be prepared to provide the model number, serial number and a brief description
of the cause for the return. Be sure to properly pack fixture; any shipping damage resulting from
inadequate packaging is the customer’s responsibility. As a suggestion, proper UPS packing or
double-boxing is always a safe method to use. CHAUVET reserves the right to use its own discretion
to repair or replace product(s).
Once you have received the RMA#, please include the following information on a
piece of paper inside the box:
1) Your name
2) Your address
3) Your phone number
4) The RMA #
5) A brief description of the symptoms
Claims
Damage incurred in shipping is the responsibility of the shipper; therefore, any damage must be
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and
submit claims with the shipper in the event that a fixture is damaged during shipping. Any other claim
for items such as missing component/part, damage not related to shipping, and concealed damage
must be made within seven (7) days of receiving merchandise.

Abyss™LED User Manual 8 6/1/2009 11:15 AM
Technical Specifications
WEIGHT & DIMENSIONS
Length ..............................................................................................................................12.8 in (326 mm)
Width................................................................................................................................ 10.9 in (277 mm)
Height................................................................................................................................. 9.5 in (241 mm)
Weight..................................................................................................................................9.1 lbs (4.1 kg)
POWER
AC power .............................................................................................115 VAC 60 Hz or 230 VAC 50 Hz
Fuse ........................................................................................................F2 A 250 V (5x20 mm fast-blow)
Power Consumption ........................................................................................34 W (0.4 A) max @ 120 V
Inrush Current....................................................................................................................(0.3 A) @ 120 V
Power Consumption ........................................................................................48 W (0.3 A) max @ 230 V
Inrush Current....................................................................................................................(0.5 A) @ 230 V
Power Output.............................................................50 units max @ 120 VAC, 100 units max @ 230 V
LIGHT SOURCE
LED ....................................................................................................22W 1,360 mA (1 white) 50,000 hrs
COVERAGE
Coverage angle ......................................................................................................................................46°
THERMAL
Maximum ambient temperature .......................................................................................... 104° F (40° C)
ORDERING INFORMATION
Abyss™LED.............................................................................................................................ABYSSLED
WARRANTY INFORMATION
Warranty..................................................................................................................1-year limited warranty