Chauvet COLORdash Accent Series User manual

User Manual

Edition Notes
COLORdash™ Accent User Manual Rev. 5
Edition
Notes
The COLORdash™ Accent User Manual Rev. 5 covers the description, safety precautions,
installation, programming, operation, and maintenance of the COLORdash™ Accent
.
CHAUVET® released this edition of the COLORdash™ Accent User Manual in August 2014.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements (example: It’s Green Thinking™) are owned or licensed by CHAUVET®. Any other
product names, logos, brands, company names, and other trademarks
featured or referred to
within this document are the property of their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Use
CHAUVET® authorizes its customers to download and print this manual for professional
information purposes only. CHAUVET® expressly prohibits the u
sage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose without
written consent from CHAUVET®.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all respects.
However, CHAUVET® assumes no responsibility for any errors or omissions in this document.
CHAUVET® reserves the right to revise and make changes to the content of this document
without obligation that CHAUVET® notify any person or company of such revision or changes.
This does not in any way constitute a commitment by CHAUVET® to make such changes.
CHAUVET® may issue a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The COLORdash™ Accent User Manual Rev. 5 supersedes all previous versions of this
manual. Discard any older versions of this manual and replace with this version. Go to
www.chauvetprofessional.com for the latest version.
Author Date Editor Date
D. Couppe
8/1/14
A. Leon
8/1/14

Table of Contents
COLORdash™ Accent User Manual Rev. 5 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
Expected LED Lifespan................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
DMX Linking..................................................................................................................................................................7
DMX Personalities........................................................................................................................................................................7
Master/Slave Connectivity............................................................................................................................................................7
Mounting.......................................................................................................................................................................8
Orientation ...................................................................................................................................................................................8
Rigging.........................................................................................................................................................................................8
Procedure ....................................................................................................................................................................................8
4. Operation...................................................................................................................................................9
Control Panel Description.............................................................................................................................................9
Control Options.............................................................................................................................................................9
Dip Switch Assignments...............................................................................................................................................................9
Operation Modes ........................................................................................................................................................10
Programming ..............................................................................................................................................................10
Starting Address.........................................................................................................................................................................10
Procedure ..................................................................................................................................................................................10
STATIC Mode.............................................................................................................................................................11
STATIC Mode Configuration......................................................................................................................................................11
Procedure ..................................................................................................................................................................................11
AUTO Mode................................................................................................................................................................11
Procedure ..................................................................................................................................................................................11
DMX Values................................................................................................................................................................12
DMX Values (Cont.)....................................................................................................................................................13

Table of Contents
-ii- COLORdash™ Accent User Manual Rev. 5
5. Technical Information.............................................................................................................................14
Product Maintenance..................................................................................................................................................14
6. Technical Specifications.........................................................................................................................15
Returns .......................................................................................................................................................................16
Contact Us...................................................................................................................................................17

Before You Begin
COLORdash™ Accent User Manual Rev. 5 -1-
1. BEFORE YOU BEGIN
What Is
Included
•COLORdash™ Accent
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box
or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure
to report damage to the carrier immediately may invalidate your claim. In addition, kee
p the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Manual
Conventions
Convention
Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
[10]
A DIP switch to be configured
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- COLORdash™ Accent User Manual Rev. 5
Product At A
Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-Ranging Power
Supply
P
Master/Slave
P
Replaceable
Fuse/Breaker
x
DMX
P
User-Serviceable
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained CHAUVET® certified technicians. Do not open
the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•The product is not intended for permanent installation.
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Make sure there are no flammable materials close to this product while it is operating.
•When hanging this product, always secure to a fastening device using a safety cable
(included).
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance with
the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage on the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single-
LED conditions. For this
reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.
Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this lifespan
is vital, lower the operating temperature by improving the ventilation around the product and
reducing the ambient temperature to an optimal operating range. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.

Introduction
COLORdash™ Accent User Manual Rev. 5 -3-
2. INTRODUCTION
Description
The COLORdash™ Accent is a small LED-based, DMX controllable, wash light designed for
indoor applications.
The COLORdash™ Accent is a high-power, high luminance
LED wash product. This product
consists of a small aluminum casing
that houses the internal power supply, the main control, the
control panel, the LED drivers, the LED boards, as well as the power and signal connectors. The
COLORdash™ Accent includes one double-bracketed yoke
that can be both a floor mount and
hanging support.
Features
•3-, 4-, or 9-channel RGBW LED wash product
•Operating modes:
•3-channel: RGB control
•4-channel: RGBW
•9-channel: RGBW, dimmer, strobe, macro, auto, auto speed
•RGBW color mixing with or without DMX controller
•Direct DMX input and output
•Automatic programs with or without DMX controller
•Static control with or without DMX controller
•0–100% dimmer
•Macros
•Master/Slave operation
•Lightweight, black aluminum casing
•Natural convection cooling (no fans)
•High power (1 W, 350 mA) LEDs
•Double-bracketed yoke that doubles as a floor stand

Introduction
-4- COLORdash™ Accent User Manual Rev. 5
Overview
Front View
Rear View
Side View
3- Pin
DMX
In/Out
Power In
Top View
LED (7)
Bracket
Adjustment Knob
Control Panel
Double-Bracketed
Yoke

Introduction
COLORdash™ Accent User Manual Rev. 5 -5-
Dimensions
4.3 in
108 mm
2.5 in
65 mm
6.9 in
174 mm

Setup
-6- COLORdash™ Accent User Manual Rev. 5
3. SETUP
AC Power
Each COLORdash™ Accent has an auto-ranging power supply that works with an input voltage
range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each
COLORdash™ Accent, refer to t
he label affixed to the product. You can also refer to the
Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the CHAUVET® website
:
www.chauvetlighting.com/download/pro.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The COLORdash™ Accent comes with a hard-wired power input cord terminated with an
Edison plug. The product side of this power cord enters the product through a strain reliever
(rubber boot) and it cannot be disconnected from the product. If the power input cord that came
with your product has no plug, or if you need to change the Edison plug, use the table below to
wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green

Setup
COLORdash™ Accent User Manual Rev. 5 -7-
DMX Linking
You can link the COLORdash™ Accent to a DMX controller using a 3-pin DMX connection. If
using other DMX-compatible products with the COLORdash™ Accent
, you can control each
individually with a single DMX controller.
DMX
Personalities
The COLORdash™ Accent uses a 3-pin DMX data connection for the STAGE1, ARC.1, and
ARC.2 DMX personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the COLORdash™ Accent to work
in these personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller, download
the DMX Primer from the CHAUVET® website: www.chauvetlighting.com/download/pro.
Master/Slave
Connectivity
The Master/Slave mode allows a COLORdash™ Accent (the master) to control one or more
COLORdash™ Accents (the slaves) without a DMX controller. One COLORdash™ Accent
becomes the master when running an auto program, or by being in a Static mode.
You must configure each slave’s control panel to operate in Slave mode. During Master/Slave
operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
The Operation section of this manual provides detailed instructions on how to configure
the master and slaves.

Setup
-8- COLORdash™ Accent User Manual Rev. 5
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET® line of
mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•The product is not intended for permanent installation.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET® line of safety cables, go to http://trusst.com/productcategory/base-plates-
accessories-clamps/.
Procedure
The COLORdash™ Accent comes with a double-bracketed yoke to which you can either attach
mounting clamps for hanging or simply use as a floor stand. You must supply your own
mounting clamps. Make sure the clamps are capable of supporting the weight of this product.
Use at least one mounting point per product. For our CHAUVET® line of mounting clamps, go
to http://trusst.com/productcategory/base-plates-accessories-clamps/.
Mounting Diagram
Floor Mounting
Overhead Mounting
Clamp
Safety
Cable

Operation
COLORdash™ Accent User Manual Rev. 5 -9-
4. OPERATION
Control Panel
Description
The COLORdash™ Accent has a basic control panel, which consists of a single 12-switch dual
in-line package (DIP) switch module. Each of the individual switches has a number (DIP switch
[1] through [12]).
The only function of DIP switches [10] through [12] is to set the product
’s operation mode. The
function of DIP switches [1] to [9] will vary depending on which operation mode you have
selected. The diagram below shows the DIP Switch Assignments. The Operation Modes table
shows the DIP switch setting to enable the various operating modes for the COLORdash™
Accent.
Control
Options
You can set the COLORdash™ Accent starting address in the 001–512
DMX range. This
enables control of up to 56 products in the 9-channel STAGE1 personality.
Dip Switch
Assignments
•When the product is in DMX mode, DIP switches [1] to [9] define the product’s
starting address.
•When the product is in AUTO mode, DIP switches [1] to [5] determine which program
will run.
•When the product is in STATIC mode, DIP switches [1] to [8] determine the intensity
of the LEDs by color.
DIP Switches [1] to [9]
DMX Address Selection
(When DMX Mode is active)
DIP Switches [1] to [8]
Color Intensity
(When STATIC Mode is active)
DIP Switches [1] to [5]
AUTO Programs Selection
(When AUTO Mode is active)
DIP Switches [10] to [12]
Operation Mode
Selection
(See table below)
On
Position
Off
Position

Operation
-10- COLORdash™ Accent User Manual Rev. 5
Operation
Modes
DIP 10 DIP 11 DIP 12 Function
On
Off
On
STATIC (Master)
Off
Off
On
AUTO (Master)
On
Off
Off
Slave
Off
On
Off
ARC.1
On
On
Off
ARC.2
Off
Off
Off
STAGE1
Programming
It is possible to change the product’s various operation modes, DMX address, Auto, or Static
mode settings while the product is on. Always make sure that you have clear access to the DIP
switches on the back of the product for easier product changes.
Starting Address
When any of the DMX modes is active as per the Operation Modes Table, you may select the
product’s starting DMX address (001–512) by setting DIP switches [1] through [9] as per the
table below.
DIP Switch 1 2 3 4 5 6 7 8 9
Value 1 2 4 8 16 32 64 128 256
Procedure
1. Set DIP switches [10] through [12] to select a DMX operation mode, as per the Operation
Modes Table.
2. Select the desired starting address (001–512) by setting DIP switches [1] through [9] to ON
or OFF until the sum of the value of the DIP switches in the ON position matches the
desired address number.
3. Refer to the examples below for more information.
Starting Address
Examples
These three examples are for STAGE1 DMX mode. Therefore, in all three cases, DIP switches
[10], [11], and [12] are set to OFF.
a. To select DMX Address 1, set DIP switch [1] to ON.
b. To select DMX Address 64, set DIP switch [7] to ON.
c. To select DMX Address 31, set DIP switches [1], [2], [3], [4], and [5] to ON
( 1+ 2 + 4 + 8 + 16 = 31).
If you are not familiar with or need more information about DMX standards or the DMX
cables needed to link this product to a DMX controller, download the DMX Primer from
the CHAUVET® website: www.chauvetlighting.com/download/pro.

Operation
COLORdash™ Accent User Manual Rev. 5 -11-
STATIC Mode
When selecting the Static mode, the COLORdash™ Accent can be set up to various colors and
intensities without a DMX controller by using DIP switches [1] through [8] as per the tables
below.
STATIC Mode
Configuration
Red
Green
Blue
White
DIP Switch
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
0 %
Off
Off
Off
Off
Off
Off
Off
Off
30 %
On
Off
On
Off
On
Off
On
Off
60 %
Off
On
Off
On
Off
On
Off
On
100 %
On
On
On
On
On
On
On
On
Procedure
1. Set DIP switches [10] and [12] to ON, and DIP switch [11] to OFF to select Static Mode.
2. Select the color intensity as indicated in the STATIC Mode Configuration table above.
AUTO Mode
Auto Mode allows the user to select one of the 32 preset programs (0–31) on each individual
COLORdash™ Accent.
Dip Switch [1] [2] [3] [4] [5]
Value
1
2
4
8
16
Procedure
1. Set DIP switches [10] and [11] to OFF, and DIP switch [12] to ON (Auto Mode).
2. Select the desired program (0–31) by setting DIP switches [1] through [5] to ON or OFF
until the sum of the value of the DIP switches in the ON position matches the desired
program number.
3. Refer to the examples below for more information.
Auto Mode
Examples
a. To select Auto program 0, set DIP switches [1] through [5] to OFF and DIP switch [12]
to ON.
b. To select Auto program 9, set DIP switches [1], [4], and [12] to ON.
Master/Slave
The Master/Slave mode allows a group of COLORdash™ Accents (the slave products) to
simultaneously duplicate the output of another COLORdash™ Accent
(the master product)
without a DMX controller.
a. Connect all COLORdash™ Accents in a daisy chain.
b. Set up the first product in the daisy chain (Master) as explained in STATIC Mode or
AUTO Mode.
c. On the rest of the COLORdash™ Accents, set DIP switch [10] to ON.
•The master product is the one that runs a program whether in Auto or Static mode.
•Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master product.
•The master product should be the first product in the daisy chain.

Operation
-12- COLORdash™ Accent User Manual Rev. 5
DMX Values
STAGE1
Channel Function Value Percent/Setting
1
Dimmer
000ó255
0–100%
2
Red
000ó255
0–100%
3
Green
000ó255
0–100%
4
Blue
000ó255
0–100%
5
White
000ó255
0–100%
6 Color Macro + White
Balance
000
ó
010
011ó035
036ó060
061ó085
086ó110
111ó135
136ó160
161ó185
186ó210
211ó215
216ó220
221ó225
226ó230
231ó235
236ó240
241ó245
246ó250
251ó255
No function
R: 100% G: 0-100% B: 0
R: 100%-0 G: 100% B: 0
R: 0 G: 100% B: 0-100%
R: 0 G: 100%-0 B: 100%
R: 0-100% G: 0 B: 100%
R: 100% G: 0 B: 100%-0
R: 100% G: 0-100% B: 0-100%
R: 100%-0 G: 100%-0 B: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
7 Strobe
000ó009
010ó255
No Function
0–20 Hz

Operation
COLORdash™ Accent User Manual Rev. 5 -13-
DMX Values (Cont.)
STAGE1
(Cont.)
Channel Function Value Percent/Setting
8 Programs
000ó020
021ó030
031ó040
041ó050
051ó060
061ó070
071ó080
081ó090
091ó100
101ó110
111ó120
121ó130
131ó140
141ó150
151ó160
161ó170
171ó180
181ó190
191ó200
201ó210
211ó220
221ó223
224ó226
227ó229
230ó232
233ó235
236ó238
239ó241
242ó244
245ó247
248ó250
251ó253
254ó255
No Function
Auto 0
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Auto 11
Auto 12
Auto 13
Auto 14
Auto 15
Auto 16
Auto 17
Auto 18
Auto 19
Auto 20 (Red)
Auto 21 (Red & Green)
Auto 22 (Red & Blue)
Auto 23 (Red & White)
Auto 24 (Green)
Auto 25 (Green & Blue)
Auto 26 (Green & White)
Auto 27 (Blue)
Auto 28 (Blue & White)
Auto 29 (White)
Auto 30 (Red & Green & Blue)
Auto 31 (Red & Green & Blue & White)
9
Auto Speed
000ó255
Only when Auto 0–19 in Ch. 8 is activated
ARC.1
Channel
Function
Value
Percent/Setting
1
Red
000ó255
0–100%
2
Green
000ó255
0–100%
3
Blue
000ó255
0–100%
ARC.2
Channel Function Value Percent/Setting
1
Red
000ó255
0–100%
2
Green
000ó255
0–100%
3
Blue
000ó255
0–100%
4
White
000ó255
0–100%

Technical Information
-14- COLORdash™ Accent User Manual Rev. 5
5. TECHNICAL INFORMATION
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product frequently.
Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-
up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.

Technical Specifications
COLORdash™ Accent User Manual Rev. 5 -15-
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight Length Width Height Weight
6.9 in (174 mm)
4.3 in (108 mm)
2.5 in (65 mm)
1.5 lb (0.6 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type Range Voltage Selection
Switching (internal)
100–240 VAC, 50/60 Hz
Auto-ranging
Parameter 120 VAC, 60 Hz 230 VAC, 50 Hz
Consumption
10 W
10 W
Current
0.1 A
0.1 A
Power I/O U.S./Canada Worldwide
Power input connector
Hard-wired
Hard-wired
Power cord plug
Edison (U.S.)
Local plug
Light Source
Type
Power
Lifespan
LED
1 W
50,000 hours
Color Quantity Current
Red
2
350 mA
Green
2
350 mA
Blue
2
350 mA
White
1
350 mA
Photo Optic
Parameter Standard 18º Optics
Illuminance @ 5 m
153 lux
Beam angle
20°
Field angle
37.5°
Thermal
Max. External Temperature
Cooling System
113 °F (45 °C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
3, 4 or 9
Ordering
Product Name
Item Code
UPC Number
COLORdash™ Accent
01030111
781462203825

Technical Specifications
-16- COLORdash™ Accent User Manual Rev. 5
Returns
You must send the product prepaid, in the original box, and with the original packing and
accessories. CHAUVET® will not issue call tags.
Call CHAUVET®
and request a Return Merchandise Authorization (RMA) number before
shipping the product. Be prepared to provide the model number, serial number, and a brief
description of the cause(s) for the return.
Clearly label the package with an RMA number. CHAUVET®
will refuse any product returned
without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed
label.
Once you have received the RMA number, include the following information on a piece of paper
inside the box:
•Your name
•Your address
•Your phone number
•The RMA number
•A brief description of the problem(s)
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. FedEx packing or double-boxing is
recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace returned
product(s).