Checkpoint MHO170 User manual

CHECK POINT
MHO170 / MHO140
Quick Start Guide
P/N: 707815
WWW.CHECKPOINT.COM
Check Point and Check Point logo are trademarks or registered trademarks of Check Point
Software Technologies Ltd. or its affiliates. All other product names mentioned herein are
trademarks or registered trademarks of their respective owners. The products described in
this document are protected by U.S. Patent No. 5,606,668, 5,835,726, 6,496,935, 6,873,988, and
6,850,943 and may be protected by other U.S. Patents, foreign patents, or pending applications.
©2019 Check Point Software Technologies Ltd. All rights reserved.
4TECHNICAL SUPPORT
For further information about the appliance, search for Check Point User Center:
https://usercenter.checkpoint.com/usercenter/login/cpapp
For technical assistance, contact Check Point 24 hours a day,
seven days a week at:
[phone] (Americas)
[phone] (International)
CLOUD MOBILE THREAT PREVENTION
WELCOME
TO THE FUTURE OF
CYBER SECURITY
For more information, visit the Check Point appliance Support
page. Search for Check Point MHO140/MHO170 Appliances.
http://supportcontent.checkpoint.com/solutions?id=sk138233
For additional information regarding setting up your appliance,
search for MHO140/MHO170 Orchestrator Getting Started Guide
http://downloads.checkpoint.com/dc/download.htm?ID=74207

CONFIGURE YOUR SECURITY GROUPS
• Connect both power cables to the power ports on the Security Orchestrator
rear panel and plug it into a power outlet.
Thank you for choosing Check Point Maestro MHO-140/MHO-170 solution. Maestro is built
to secure the largest networks in the world, delivering unprecedented resiliency & efficiency
by orchestrating multiple Security Gateway appliances into a unified security system. You are
now minutes away from setting up the most advanced security platform designed to prevent
the most sophisticated threats today and in the future.
Should you have any questions about your purchase, please don’t hesitate to contact Check
Point support services.
Windows 7, 8, and 10 configuration:
• Right-click on the network adapter
you want to assign an IP address and
click Properties.
Select Internet Protocol Version 4
(TCP/IPv4) and click the
Properties button.
• In the IP address field,
enter 192.168.1.2.
• In the Subnet mask field,
enter 255.255.255.0.
• Leave the Default gateway and
DNS settings fields empty.
• Click OK and close the dialog boxes.
• After completing the initial connection, the First Time Configuration Wizard
will guide you through the process of configuring the appliance.
Figure 1
Internet Protocol (TCP/IP) Properties
Figure 2
Appliances Login Page
• Launch the Web browser and enter https://192.168.1.1 in the address bar.
Note – You might receive a certificate error page due to a known, unresolved
browser conflict. Click Continue to this Web site.
• Log in with the default system administrator login name/password,
admin/admin, and click Login.
• Initial setup must be done from a PC connected to the orchestrator
Management interface via the included Ethernet cable. Management
interface is marked as MGMT on MHO170 on the front panel or on MHO140
on the rear panel.
3
POWER UP YOUR CHECK POINT ORCHESTRATOR
1
CONNECT YOUR PC FOR INITIAL SETUP
WARNING! Before you begin with the appliance installation,read all the safety
instructions. Search for MHO140/MHO170 Orchestrators Getting Started Guide.
http://downloads.checkpoint.com/dc/download.htm?ID=74207
Latest Software: We recommend that you install the most recent software
release to stay up-to-date with the latest functional improvements, stability
fixes, security enhancements, and protection against new and evolving attacks.
Note – Popups must always be allowed on https://<appliance_ip_address>.
2
For additional information regarding configuring your security
groups, search for MHO140/MHO170 Appliances Admin Guide .
http://downloads.checkpoint.com/dc/download.htm?ID=74303
• Choose “Orchestrator” Menu in order to configure your security groups
MHO 170
MHO 140