ChoiceMMed LungBoost MD8000 User manual

Quick Guide
Ver 3.0

2 3
Limited Warranty
Thank you for purchasing a ChoiceMMed product.
Visit www.choicemmedamerica.com/register to register your product
to obtain full warranty services.
For detailed warranty information, visit
www.choicemmedamerica.com/warranty
For questions regarding our products or services, visit
www.choicemmedamerica.com/contact
or contact our helpline at: [phone]
Disclaimer
Information provided by ChoiceMMed is believed to be accurate and
reliable. However, ChoiceMMed assumes no responsibility for the use of
such information, nor for any infringements of patents or other rights of
third parties, that may result from its use.

3
Intended Use and Indications
The LungBoost Respiratory Trainer is a device which assists its user to
strengthen respiratory muscles. The device uses dual purpose training
– Endurance Aerobic Training and High Intensity Anaerobic Interval
Training, while strengthening inspiration (inhalation) and expiration
(exhalation) muscles.
LungBoost is intended for anyone who wishes to improve the strength
and endurance of his or her respiratory muscles.
This includes professional athletes, weekend athletes & healthy people.
Warnings
The device is not indicated for use by people who are too weak or ill
to use the device. If there is any doubt whether you are able to use the
device, please seek the advice of a physician.
The device is not intended for use in conditions not mentioned in this
guide, for example outdoors, or in extreme weather.
The device is not intended to be used by more than one person unless
cleaned according to the instructions in the LungBoost User Guide.
User Guide
Complete details for using LungBoost are provided in the LungBoost
User Guide, available at www.choicemmedamerica.com/lungboost.

4 5
BOX CONTENTS
1 LungBoost Respiratory Trainer
1 Breathing Tube
1 Mouthpiece
1 Tube Connector
The LungBoost Respiratory Trainer is a device which assists its user to
strengthen respiratory muscles. The device uses dual purpose training
– Endurance Aerobic Training and High Intensity Anaerobic Interval
Training, while strengthening inspiration (inhalation) and expiration
(exhalation) muscles.
LungBoost is intended for anyone who wishes to improve the strength
and endurance of his or her respiratory muscles.
5 Resistance Cones
1 Quick Guide
2 AA Batteries

5
9
10
11
1
23
456
7
8
5 Resistance Cones
1 Quick Guide
2 AA Batteries

6 7
Understanding the Display
ERROR
GO
REST
BATTERY STATUS
MANEUVER COUNT
SECONDS
ENDURANCE MODE
DIFFICULTY LEVEL
STRENGTH MODE
EXHALE
INHALE
EXERTION EFFORT
1
2
3
4
5
6
7
8
9
10
11
12
Normally Blank. Lights if there is a system error
Indicates you may begin a maneuver
Indicates you must wait before starting another maneuver
Indicates the battery life remaining
Indicates the number of maneuver completed
Indicates the number of seconds an endurance maneuver was held
Indicates you are training in Endurance Mode
Indicates the level of diculty you are training. There are 5 levels.
Indicates you are training in Strength Mode
Indicates you are performing an exhale maneuver
Indicates you are performing an inhale maneuver
Indicated the eort exerted. Ball height will vary from 1 to 7
EFFORT

7
Insert Batteries
1. Remove the back cover from
your LungBoost
2. Insert 2 AA batteries according
to the diagram
Turning your LungBoost On/O
1. Press the OK button once to turn the unit on
2. Press and hold the OK button to turn the unit o
First-time Use
When turning on your unit for the rst time, or after replacing
the batteries, you are prompted to enter the time of day.
Note: AM or PM setting
1. The hour will display as a ashing 01
(the two left digits). Press the LEVEL
button to increase the hour. When
you have reached the desired hour,
press OK.
2. The minutes will display as a ashing
00 (the two right digits). Press the
LEVEL button to increase the minutes.
When you have reached the desired
minutes, press OK.
Getting Started

8 9
1. Press the ENDURANCE button to start training in Endurance
Mode
2. Choose the diculty level
a. Press the LEVEL button (right arrow) until you have
reached the desired level of training.
We recommend starting on level 1. Refer to page 6.
2. When GO appears on the screen, you are ready to begin.
Gently inhale or exhale through the mouthpiece. (The unit
will automatically adjust to whichever breathing action you
choose).
Training in Endurance Mode
The goal of endurance training is to inhale or exhale as long as possible,
and to keep the ball in the air stable. Your eort level is indicated by the
number of the high-lighted ball.
User starting at 1 ball
exerted at 00 seconds
After 01 seconds,
user exerted 2 balls
After 03 seconds,
user exerted 7 balls
If you feel that you can reach the highest ball too easily, you can raise
the diculty level by pressing the LEVEL button (refer to page 6)
You can further increase the diculty level by attaching resistance
cones to the back of the unit.

9
The goal of endurance training is to inhale or exhale as long as possible,
and to keep the ball in the air stable. Your eort level is indicated by the
number of the high-lighted ball.
Training in Endurance Mode (cont.)
3. Rest for 15 Seconds
d. After every inhale/exhale exercise, REST will appear
on the top of the screen. You must rest for 15 seconds,
to prevent hyperventilation or muscle fatigue. During
this resting period, the two left digits on the display
will count down from 15 to 1, indicating the number
of seconds the user must wait before starting another
maneuver. The right two digits will show the number
of seconds the user inhaled or exhaled the previous
maneuver at the eort (highlighted ball) indicated.
(see diagram a. below)
e. After the 15 seconds, GO will appear on the top of the
screen indicating you may begin another maneuver.
The two left digits will now display the number of
maneuvers completed today. The two right digits will
reset to 0. ( see diagram b. below)
a.
In this example, the user exhaled in endurance
mode for 03 seconds at an eort of 5 on level 1.
This user has 10 more seconds to rest before
beginning another maneuver.
b.
In this example, the user has completed
2 maneuvers today.
This user is ready to start the next maneuver.

10 11
1. Press the STRENGTH button to start training in Strength
Mode
2. Choose the diculty level
a. Press the LEVEL button (right arrow) until you have
reached the desired level of training.
We recommend starting on level 1. Refer to page 6.
2. When GO appears on the screen, you are ready to begin.
Inhale or exhale as hard as you can through the mouthpiece.
(The unit will automatically adjust to whichever breathing
action you choose).
Training in Strength Mode
The goal of strength training is to inhale or exhale as hard as you can,
and to ll as many balls as possible. (You should try to ll/light the balls in
the shortest amount of time possible, preferably in less than two seconds).
Your eort is indicated by the number of the highest high-lighted ball.
If you feel that you can reach the highest ball too easily, you can raise
the diculty level by pressing the LEVEL button. (refer to page 6)
You can further increase the diculty level by attaching resistance
cones to the back of the unit.
The user is ready to begin a strength
maneuver on level 1.
This user has completed 00 maneuvers.