Citizen E260 User manual

E260 Abbreviated instruction
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual: E260 instruction manual
English
Component identification
60
400
300
250
120
130
140
150
160
180
200
220
80
85
90
95
100
110
65
70
75
T
A
C
H
Y
M
E
T
E
R
12
6
9 3
60
30
45 15
12
10
8
6
4
2
0
•
•
•
•
•
•
•
•
•
•
•
•
14
16
18
20
22
24
ON
OFF
60
05
10
15
20
25
30
35
40
45
50
55
Minute hand
Button
B
Crown
Date
indication
Hour
hand
Alarm hand
Button
C
Alarm
crown
Chronograph
second hand
Dual time hand
Chronograph
hour hand
Button
A
Chronograph
minute hand
Alarm
indicator
hand
Second hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
• Refer also to our web page for detail of usage of the
scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/
pdf/enhanced/e.pdf)
Setting the time and date indication
Setting the time
1.
Pull the crown out to position 2when the second hand points
0 second.
The second hand stops.
2.
Rotate the crown to set the time.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3.
Push the crown in to position 0in accordance with a reliable
time source.
The second hand starts moving.
Setting the date indication
• Date indication adjustment is required on the first days of March, May, July,
October and December.
1.
Pull the crown out to position 1.
2.
Rotate the crown counterclockwise to set the date indication.
• The crown turns freely and the date does not change if the crown is turned
to the right.
3.
Push the crown in to position 0to finish the procedure.
Indicating the time of another place
You can set the dual time hand to indicate time of another place.
1.
Set the crown to position 0or 1.
2.
Press and release the upper left button Cto adjust the time.
• Each time you press the button, the dual time hand moves by 1 hour.
• The dual time hand returns to “0” just after proceeding to “24”.
3.
Pull the crown out to position 2when the second hand points
0 second.
The second hand stops and the dual time hand points to the current minute.
• While setting the minute of dual time, the dual time hand indicates the
minute in 5-minute increments as follows.
Minute when setting the
dual time
12
8
10
6
4
2
0
•
•
•
•
•
•
•
•
•
•
•
•
14
16
18
20
22
24
30 35 40 45 50 552520151050
The dual time hand shows 25 minutes in this figure.
4.
Press and release the upper left button Cto adjust the minute.
• Each time you press the button, the dual time hand moves by 5 minutes.
• The dual time hand returns to “0” just after proceeding to “24”.
5.
Push the crown in to position 0in accordance with a reliable
time source.
The second hand starts moving and the dual time hands returns to time
indication.
Crown's position
0 1 2

E260 Abbreviated instruction
Checking the reference position
1.
Pull the crown out to position 2.
2.
Press and hold the lower right button Afor 5 seconds or more.
The dual time hand moves to its current reference position.
3.
Checking the reference position
Correct reference positions:
• Dual time hand: “0”
When the current reference position is
different from the correct one, adjust the
position following the steps of “Correcting
the reference position”.
4.
Push the crown in to position 0to finish the procedure.
Correcting the reference position
1.
Pull the crown out to position 2.
2.
Press and hold the lower right button Afor 5 seconds or more.
The dual time hand moves to its current reference position.
3.
Press and release the upper left button Cto adjust the
reference position.
4.
Push the crown in to position 0to finish the procedure.
Resetting the watch - All Reset
1.
Pull the crown out to position 2.
2.
Press and release both the upper left button Cand the lower
right button Aat the same time.
The alarm sound and all reset is executed.
3.
Push the crown in to position 0to finish the procedure.
After All Reset
After All Reset, adjust the reference position and set the time, date, and the dual
time hand.
12
8
10
6
4
2
0
•
•
•
•
•
•
•
1
4