Clarke CIS8612 User manual

GC0319 ISS 2

15
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [email protected]
NOTE: Check periodically (two to three times in the first week and
tighten ratchet tie-downs and all hardware as needed. Monthly
inspection is recommended throughout usage.
DISASSEMBLY
When disassembling the garage
depress the spring-loaded bar to
disengage the ratchet and open the
ratchet handle completely to allow
the webbing strap to pull through.
PLEASE RE-READ ALL WARNINGS
CONTAINED ON PAGE 2/3 OF THESE
INSTRUCTIONS. SAVE THESE
INSTRUCTIONS FOR FUTURE USE.
To dismantle, execute all instructions
in reverse order. Store your garage in a cool, dry location between
seasons to
prolong the usable life of all components.
Components are not equally durable and will require replacement over
time
at differing intervals.
ADDITIONAL ANCHORING
Please note that when the instant garage or shed is to be sited on soft
ground
an additional, or alternative method of anchoring may be required.
This can take the form of an additional Auger Securing Set GA1 (already
supplied with Clarke instant garages), which can add greater security for
exposed, windy locations.
Alternatively the Easy Hook Anchoring System GHA2, can be used to
provide
greater security on soft ground. Available from your Clarke dealer.