Classic Accessories 72602 User manual

Instructions: Fairway Golf Car Seat Cover
WARNING
When replacing seat bottom after installation,
be sure the seat cover does not interfere with
seat locking mechanism.
Cleaning
Machine washable with mild detergent
and air dry.
One Year Warranty
This product is factory warranted for
workmanship and materials for one year
after purchase.
Parts:
Important! Before Fitting!
You will need to remove the seat bottom in order
to fit the seat bottom cover.
SEAT BACK
COVER
SEAT BOTTOM
COVER
Seat bottom cover installation:
1. Place cover over one end of the
seat bottom.
2. Pull cover over the entire seat.

3. Pull elastic hem over the seat.
On both ends of the seat, pull the exposed elastic
hem cord over the end of the seat. In some cases,
depending on the style of seat, you will have to
pull it over the armrests as shown below.
4. Thread the attachment flap over
the end of the seat.
On both ends of the seat, pull the attachment flap
over the end of the seat or under the armrest as
shown below.
Your seat should now look
like the photo
below with
attachment
webbing,
attachment
flaps and
elastic seat
hem showing.
5. Thread the webbing attachment
straps through the attachment flap
hoop and hem hoop.
Thread the webbing attachment straps w/buckles
through the hoops at the ends of both the
attachment flaps and the elastic hem. Once both
hoops are threaded with the webbing attachment
straps, insert the side release buckles into
one another. Proper assembly is shown in the
photos below.
6. WARNING! Keep the seat
attachment points clear.
On some models of golf cars it is necessary to
keep the seat cover clear of any metal tab fittings
that keep the seat in place. Failure to keep these
attachment points clear will cause the seat to
malfunction and could damage the cover.

Correct installation of the seat
bottom cover shown below:
Seat back cover installation:
1. Place the cover over one end
of the seat back.
2. Pull the cover over the entire seat.
Continue by stretching the seat cover over the
entire seat as shown.
SEAT BOTTOM
COVER
3. Attach hem clip on the back
of the cover.
Hook the hem clip attached to the elastic hem to
the opposite side of the seat hem.
Enjoy your seat covers!

09cG55_1080272602 72604
22640 68th Ave. S. Tel: [phone]
Kent, WA, USA 98032 Fax: [phone]
www.classicaccessories.com
Email: [email protected]
©2009 Designed in the U.S.A.