Classic Accessories FAirway Golf Car Seat Cover User manual

WARNING
Be sure the seat cover does not interfere with the seat attachment
mechanism when replacing the seat bottom after installation.
Important! Before Fitting!
You may need to remove the seat bottom
in order to fit the seat bottom cover.
Seat bottom cover installation:
1. Fit the bottom cover on the seat top
(Fig. 1, Fig. 2).
You will need to remove your car seat bottom. Consult your golf car
owner’s manual. Find the “FRONT” label and position the cover so this
label is at the front of the seat. Fit your cover over one end of your
seat then pull it across the entire seat.
Instructions:
Golf Car Seat Cover
SEAT BACK
COVER
SEAT
BOTTOM
COVER
Parts:
Fig. 1Fig. 2
3. Thread the attachment flap over the end of the seat.
On both ends of the seat, pull the attachment flap over the end of the
seat or under the armrest (Fig. 4).
Your
seat should now look like the illustration below (Fig. 5) with the
attachment webbing, attachment flaps and elastic seat hem showing.
Fig. 5
no bleach
ne pas
javelliser
no usar
lejía
do not
wash
ne pas
laver
no lavar
line dry
étendre
mouillé
colgar
para
secar
tumble
dry gentle
sécher par
culbutage
cycle délicat
secar en la
secadora
ciclo para
prendas
delicadas
machine
wash cold
laver en
machine à
l’eau froide
lavar en la
lavadora
con agua fría
30C
hand
wash cold
laver à la
main à
l’eau
froide
lavar a
mano con
agua fría
30C
do not
iron
ne pas
repasser
no
planchar
not
waterproof
non
imperméable
no es
impermeable
mild soap
savon
doux
jabón
suave
do not
pack wet
ne pas
ranger
mouillé
no
guardar
húmedo
no tools
required
Aucun
outil
nécessaire
no requiere
herramientas
bleach ok
javellisant
autorisé
puede
usar lejía
no bleach
ne pas
javelliser
no usar
lejía
do not
wash
ne pas
laver
no lavar
line dry
étendre
mouillé
colgar
para
secar
tumble
dry gentle
sécher par
culbutage
cycle délicat
secar en la
secadora
ciclo para
prendas
delicadas
machine
wash cold
laver en
machine à
l’eau froide
lavar en la
lavadora
con agua fría
30C
hand
wash cold
laver à la
main à
l’eau
froide
lavar a
mano con
agua fría
30C
do not
iron
ne pas
repasser
no
planchar
not
waterproof
non
imperméable
no es
impermeable
mild soap
savon
doux
jabón
suave
do not
pack wet
ne pas
ranger
mouillé
no
guardar
húmedo
no
required
Aucun
o
néces
no requiere
herramien
bleach ok
javellisant
autorisé
puede
usar lejía
no bleach
ne pas
javelliser
no usar
lejía
do not
wash
ne pas
laver
no lavar
line dry
étendre
mouillé
colgar
para
secar
tumble
dry gentle
sécher par
culbutage
cycle délicat
secar en la
secadora
ciclo para
prendas
delicadas
machine
wash cold
laver en
machine à
l’eau froide
lavar en la
lavadora
con agua fría
30C
bleach ok
javellisant
autorisé
puede
usar lejía
Fig. 4
mild soap
savon doux
jabón suave
2. Pull the elastic hem over the seat.
On both ends of the seat, pull the exposed elastic hem
cord over the end of
the seat. In some cases,
depending on the style of
seat, you will have to pull it
over the armrests (Fig. 3).
Fig. 3

tools
util
saire
tas
hand
wash cold
laver à la
main à
l’eau
froide
lavar a
mano con
agua fría
30C
do not
iron
ne pas
repasser
no
planchar
not
waterproof
non
imperméable
no es
impermeable
mild soap
savon
doux
jabón
suave
do not
pack wet
ne pas
ranger
mouillé
no
guardar
húmedo
no tools
required
aucun
outil
nécessaire
no requiere
herramientas
5. WARNING Keep the seat attachment
points clear.
On some models of golf cars it is necessary to keep the seat
cover clear of any metal tab fittings that keep the seat in place
(Fig. 9). Failure to keep these attachment points clear will cause
the seat to malfunction and could damage your cover.
Correct installation of the seat bottom cover shown below:
SEAT BOTTOM
COVER
Fig. 10
Fig. 6Fig. 7
Fig. 8
Fig. 9
Fig. 11
no bleach
ne pas
javelliser
no usar
lejía
do not
wash
ne pas
laver
no lavar
line dry
étendre
mouillé
colgar
para
secar
bleach ok
javellisant
autorisé
puede
usar lejía
no bleach
ne pas
javelliser
no usar
lejía
do not
wash
ne pas
laver
no lavar
line dry
étendre
mouillé
colgar
para
secar
bleach ok
javellisant
autorisé
puede
usar lejía
2. Attach the hem clip on the back of the cover.
Hook the hem clip attached to the elastic hem to the opposite
side of the seat hem (Fig. 11). Enjoy your seat covers!
Seat back cover installation:
1. Place the cover over one end of the seat back and pull
the cover over the entire seat front (Fig. 10).
4. Thread the webbing attachment straps through the
attachment flap hoop and hem loop.
Thread the webbing attachment straps with buckles through
the loops at the ends of both the attachment flaps and the
elastic hem. Once both loops are threaded with the webbing
attachment straps, insert the side release buckles into one
another. (Fig. 6, Fig. 7, Fig. 8).
Cleaning
Clean your cover with a soft brush and lukewarm water or machine
wash in COLD water. DO NOT USE SOAP as it may remove the
protective coatings. Line dry or machine dry on air or delicate.
Storage
To avoid mildew, be sure the cover is completely dry before
you store it.