CLEAR DESIGN Willow Park ACACIA Series User manual

ACACIA SERIES
Natural Wood Tables
General Installation Guide

ii
ACACIA SERIES
LEG INSTALLATION
Place tabletop with bottom facing up on a soft surface to avoid scratching the
table. Acacia tables come with pre-drilled holes for installation. Align legs with
pre-drilled holes and secure with provided screws.
a) STANDING–HEIGHT ANGLED SLEIGH LEGS WITH
SUPPORT BRACES
First, align leg and brace pilot holes to surface pre-drilled holes to identify
the location of self-tapping screws on bottom of leg.
Wood Screws
Self-Tapping Screws

iii
ACACIA SERIES
b) SEATED–HEIGHT ANGLED SLEIGH LEGS
c) ANGLED POST LEGS
Wood Screws
Wood Screws

iv
ACACIA SERIES
2-PIECE SURFACE INSTALLATION
Place tabletops with bottoms facing up on a soft surface to avoid scratching the
table. Lay the joining hardware into the slotted areas and attach flat brackets 1.5
inches from surface edges. Align leg and brace pilot holes to surface pre-drilled
holes to identify the location of self-tapping screws on bottom of leg.
Secure with hardware.
1.5"

v
END OF ACACIA SERIES

1-866-304-7197 | [e-mail] | mycleardesign.com
© 2023 Clear Design | Version 23.1.0