CLEAR DESIGN EDGE ECH2472 User manual

ECH2472
EDGE
CREDENZA SHELL
24X72
with Half Modesty Panel
General Installation Guide

CODE QTY DESCRIPTION
ECH2472
1Main Surface
2Recessed-End Panel
1Half Modesty Panel
11 Cam Pin
11 Cam Lock
11 Cam Cap
All parts listed are for a single credenza shell; additional parts will be
needed for additional credenza shells.
PARTS LIST
1

2
CREDENZA SHELL
1 | INSERT HARDWARE INTO RECESSED-END PANELS
Requires 2 cam pins and 2 cam locks for each panel.
2 | INSERT HARDWARE INTO MODESTY PANEL
Requires 7 cam locks.
Cam Lock
Cam Lock
Cam Pin

3
CREDENZA SHELL
3 | SECURE RECESSED-END PANELS TO MODESTY PANEL
Align the cam pins so they sit inside of open cam locks. Use a screwdriver
to turn cam locks clockwise and lock into place.
4 | INSERT HARDWARE INTO MAIN SURFACE
Requires 7 cam pins.
Cam Pin

4
CREDENZA SHELL
5 | SECURE MAIN SURFACE TO BOTTOM PANELS
Align the cam pins so they sit inside of open cam locks. Use a screwdriver
to turn cam locks clockwise and lock into place.

1-866-304-7197 | [e-mail] | mycleardesign.com
© 2022 Clear Design | Version 22.1.0