Clear One COLLABORATE Live 600 User manual

COLLABORATE® Live 600
Quick-Start Guide
QSG-0072-001v1.1 April 2023

COLLABORATE® Live 600
Page 1 QSG-0072-001v1.1 April 2023
Quick-Start Guide
Notices
© 2023 ClearOne, Inc. All rights reserved.
Information in this document is subject to change without notice.
Document: QSG-0072-001v1.1 April 2023
ClearOne®Contacts
Headquarters Headquarters
5225 Wiley Post Way Suite 600 Tel: +1.801.975-7200
Salt Lake City, UT 84116
Sales Technical Support
Tel: [phone] Tel: [phone]
[email protected] [email protected]

COLLABORATE® Live 600
Page 2 QSG-0072-001v1.1 April 2023
Quick-Start Guide
Components Included
COLLABORATE Live 600
No Description Products
1 COLLABORATE Live 600
codec with power supply
and COLLABORATE Remote
control with dongle
2 910-2100-018
UNITE 260 pro camera,
power supply, HDMI cable
and RS232 serial control
cable.
Note: The remote control
inside the camera box is
only for any advanced con-
figuration in the camera, if
required.
For the camera’s control, use
the COLLABORATE Codec
Appliance’s remote control.
3 910-156-200-00
CHATAttach 150, cables and
power supply.

COLLABORATE® Live 600
Page 3 QSG-0072-001v1.1 April 2023
Quick-Start Guide
Making the Connections
Connect the CHATAttach 150, the UNITE 260 camera, Ethernet, and monitor(s) to the
COLLABORATE Live 600 codec as shown.
1080p or 720p Digital Display
UNITE 260 Camera Video
Ethernet Connection
Power Connection
Attach Cable
USB Connection
CHATAttach 150
Note: Audio and power connections not shown.
Camera Serial Control

COLLABORATE® Live 600
Page 4 QSG-0072-001v1.1 April 2023
Quick-Start Guide
Connecting the Remote Control Dongle
The Remote Control includes a dongle that plugs into the FRONT USB port on the codec.
Audio Output Options
There are three audio output options, accessed from the back of the COLLABORATE Live 600, for
connecting the audio.
1. Balanced Audio output to an amplifier that is connected to speakers
2. Line output to powered speakers
3. HDMI output to the primary monitor
Balanced Audio Output
HDMI Combined Video
and Audio Output
Line Audio Output

COLLABORATE® Live 600
Page 5 QSG-0072-001v1.1 April 2023
Quick-Start Guide
Configuring Display Settings
After all peripherals are connected to the unit, turn the unit on.
Once COLLABORATE Live is loaded – you will see your local camera video on your screen.
Using the remote control, navigate to the display settings:
Settings > Advanced > Display
According to your monitor capabilities, set to the maximum supported resolution. If 2 monitors are
connected to the unit, the display mode is automatically changed to dual mode and you can set both
monitors’ resolutions.
Configuring Audio Settings
The COLLABORATE Live 600 audio input is CHAT 150 and audio output is set to the Balanced Audio
Output.
Verify this in COLLABORATE Settings > Audio & Video
Note: It is recommended to use the CHATAttach 150.

COLLABORATE® Live 600
Page 6 QSG-0072-001v1.1 April 2023
Quick-Start Guide
Configuring Network Settings
Using your remote control, navigate into the network settings:
Settings > Advanced > Network
The COLLABORATE Live 600 obtains its IP automatically by default from the DHCP server.
Set “Obtain Address From DHCP” to “Disabled” to manually configure network settings.