Clear One CONVERGE Huddle User manual

COLLABORATE® VERSA™ Pro 60
Quick-Start Guide
QSG-0168-001v1.0 May 2023

COLLABORATE® VERSA™ Pro 60
Page 1 QSG-0168-001v1.0 May 2023
Quick-Start Guide
Notices
© 2023 ClearOne, Inc. All rights reserved.
Information in this document is subject to change without notice.
Document: QSG-0168-001v1.0 May 2023
ClearOne®Contacts
Headquarters Headquarters
5225 Wiley Post Way Suite 600 Tel: +1.801.975-7200
Salt Lake City, UT 84116
Sales Technical Support
Tel: [phone] Tel: [phone]
[email protected] [email protected]

COLLABORATE® VERSA™ Pro 60
Page 2 QSG-0168-001v1.0 May 2023
Quick-Start Guide
Components Included
The COLLABORATE VERSA PRO 60 includes the UNITE® 60 4K Camera, the CONVERGE Huddle
DSP Mixer, a Ceiling Mic Array.
COLLABORATE Versa Pro 60
No Description Products
1 910-3200-701
(1)CONVERGE Huddle, (2-4)
Terminal Block Connectors,
(5) USB 3.0 cable, (6) TRRS
cable, (7) Mini COMBICON
plug connectors, (8-9)
Phillips pan-head screws,
(10) Mounting ears kit
2 910-2100-009
UNITE 60 4K camera, power
supply, USB 2.0 Type B to
Type A, 5ft, and camera
remote control
3 910-001-013-W
Ceiling Microphone Array,
Includes microphone array,
RJ45 to Phoenix adapter,
ceiling mounting base, 12”
drop-down cable, 24” drop-
down cable, 25’plenum rated
CAT5e cable
4 910-3200-202
POE POWER SUPPLY KIT,
Includes 1 x 36 Watt PoE+
Injector, 2 x 25 ft CAT6
cables.

COLLABORATE® VERSA™ Pro 60
Page 3 QSG-0168-001v1.0 May 2023
Quick-Start Guide
Connecting USB to Camera
Connect the UNITE 60 4K camera to a USB 3.0 port on the CONVERGE Huddle.
Connecting Mic to CONVERGE Huddle
Connect the Ceiling Mic Array to a Mic/Line input on the CONVERGE Huddle.
Type B USB 3.0 to USB Type A
RJ-45/CAT5e

COLLABORATE® VERSA™ Pro 60
Page 4 QSG-0168-001v1.0 May 2023
Quick-Start Guide
Connecting Display to CONVERGE Huddle
Connect the display to the HDMI output on the CONVERGE Huddle.
Connecting CONVERGE Huddle to PoE
Connect the CONVERGE Huddle to a PoE power injector (Midspan), or PoE Ethernet Network
Switch (Endspan).
HDMI
PoE

COLLABORATE® VERSA™ Pro 60
Page 5 QSG-0168-001v1.0 May 2023
Quick-Start Guide
Configuring
To cast a laptop screen onto display via USB 3.0, install the DisplayLink driver (one time installation)
on the laptop. Use the CD provided in the package, or download the driver from:
http://www.displaylink.com/downloads
Note: If a Windows 10 laptop comes with the DisplayLink driver pre-installed, it does not need
to be installed separately. The CONVERGE Huddle has been tested with DisplayLink driver
version 8.2.1999.0.
Connect your laptop to the USB 3.0 Type-B input port on the CONVERGE Huddle.
For more detailed information about CONVERGE Huddle, Ceiling Mic Array, and UNITE 60 products,
please refer to the appropriate user manual or quick start guide on the ClearOne website:
CONVERGE Huddle
Ceiling Mic
UNITE 60 4K
USB 3.0 Type A to USB Type B