Clearaudio double matrix professional SONIC User manual

User manual
Bedienungsanleitung
© clearaudio electronic GmbH, 2022-01 Made in Germany
double matrix professional SONIC
Pic. similar / Abb. ähnlich
Pic. similar / Abb. ähnlich

Page / Seite 2 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
User manual............................................2 - 15
Bedienungsanleitung..............................16 - 29
Dear Clearaudio customer,
Congratulations on the purchase of your double matrix professional SONIC , a high-performance
product made by Clearaudio.
Keeping your vinyl records clean improves their sound quality. It is equally important to clean new
vinyl records, because the pressing process often leaves behind surface residues. The integrated
sonic cleaning technology of the Clearaudio double matrix professional SONIC will eectively
remove all such contaminants from the grooves of your records.
Please read these instructions carefully to ensure correct operation and to achieve the
best possible cleaning results.
Components and processing
The Clearaudio double matrix professional SONIC is built using the highest quality components
and is designed for intensive and continuous use. The chassis, cleaning, vacuum and antistatic
arms, as well as the Seal record clamp are machined from solid aluminium. The chassis is lined with
acoustic damping pads to keep operational noise to a minimum.
Our quality standard is reected in a warranty of 3 years, provided that the completed warranty card
is returned to us within 14 days of purchase.
We thank you for your purchase and hope you enjoy using your new
double matrix professional SONIC.
Available Accessories:
Dustcover for double matrix professional
SONIC (Art. No. AC143)
Record cleaning uids
(for example pure groove
Art. No. AC048)
Available in dierent sizes
and versions.
Replacement microber strips for
double matrix professional SONIC
(Art. No. AC062/DMPS)

Made in Germany Page / Seite 3
User manual / Bedienungsanleitung
Safety instructions
1. Transportation
• If you transport or ship the Clearaudio double matrix professional SONIC for any reason,
the original packaging must be used. Please pack the machine as it was packed originally by
Clearaudio to ensure secure transport.
Ensure also that both tanks (uid reservoir and waste uid tank) are empty before
packing the unit and the cap of the cleaning uid reservoir is secured with tape.
2. Service
• The double matrix professional SONIC should only be repaired by Clearaudio approved
institutions or persons, or by Clearaudio, otherwise the warranty will be void.
• If damage should occur for any reason and repair to the machine is necessary, it should be sent
to the selected dealer or distributor.
Please note: If uids that produce foam, or uids which are acid-based, have been used, or if the
precautions noted in this instruction manual have not been followed, the warranty will be void.
3. Safety instructions
CE Mark
This electronic product complies with the valid guidelines for obtaining the CE mark.
Disposal
This product is not allowed to be disposed with household waste.
WEEE Reg.No.: DE26004446
Visual check
Never touch the power cable with wet hands or other wet body parts!
For your own safety, a frequent visual check of the mains cable is suggested.
If any damage should occur, repair or exchange should be done immediately using an
approved electrician or institution. Any servicing of Clearaudio products should only be
done through certied Clearaudio dealers.
This machine is designed to be used in heated or climate controlled surroundings.
Legal disclaimer:
Clearaudio refuse to cover any claims or damage to records or any other damage that have been
caused by misuse or mishandling of the smart matrix SILENT .

Page / Seite 4 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
Contents
1. Package contents.................................................................5
2. Features overview of the
double matrix professional SONIC ......................................6
3. Setup of the double matrix professional SONIC ..................7
4. Operating elements.............................................................8
5. Functions .............................................................................9 - 10
6. Initial start-up.....................................................................11
7. Maintenance ........................................................................12
8. Points to note ......................................................................13 - 14
9. Technical data......................................................................15
Warranty information..............................................................30 - 31

Made in Germany Page / Seite 5
User manual / Bedienungsanleitung
1. Package contents
The Clearaudio double matrix professional SONIC is delivered in a special designed packaging for
this product.
Ensure that the packaging has no external damage, such as shipping damage.
Please retain the packaging, as only the original packaging provides the necessary protection and
stability during any subsequent transportation.
Please check the contents of you’re newly purchased double matrix professional SONIC
record cleaning machine for completeness:
1. Fully assembled record cleaning machine
2. Seal record clamp
3. Filling funnel
4. IEC connector
(according to country specications)
5. 6pcs. spare microber stripes
6. 500ml groove care cleaning uid*
7. Cap for cleaning uid reservoir
(mounted on the lling opening)
8. Tube plug
(mounted on the drain tube)
9. Single adapter
10. Hex wrench #5
11. Warranty card
12. Quality control card
In the event of an incomplete delivery, please contact the relevant Clearaudio dealer immediately.
* We do not recommend to clean your shellac records with groove care because Vinyl cleaner easily
aect Shellac.
Please use only liquids which are specically developed for this purpose (for example Clearaudio
pure groove Shellac, Art. No. AC048/SH, available through your Clearaudio dealer or directly from
the Clearaudio analog shop: www.analogshop.de.)

Page / Seite 6 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
2. Features overview of the double matrix professional SONIC
• Integrated sonic – vibrating cleaning elements
Deep cleaning of pressing residues and persistent dirt deep within the record groove.
• Cleans LPs, EPs and singles
• Simultaneous cleaning of both sides
Ecient and eective cleaning of both sides of a record in a single washing program.
• Manual operation
Set your own cleaning parameters.
• Bi-directional rotation
For enhanced cleaning performance you can change the direction of the rotation.
• Variable speed regulation
During manual operation, select the desired speed to receive the best cleaning result.
• LED level indication
Shows the uid level in the internal cleaning uid reservoir.
• Adaptive cleaning brush
The cleaning brushes automatically adjust for dierent thickness and sizes of record.
• Seal record clamp
Ensures that the record is held rmly during the cleaning process and protects the record label
from uid damage.
• Auto mode
A fully automated cleaning program suitable for most record cleaning situations.
• Super clean mode
A fully automated cleaning program for records that need an extra thorough clean.
• ECO mode
A shortened cleaning program.

Made in Germany Page / Seite 7
User manual / Bedienungsanleitung
3. Setup of the double matrix professional SONIC
Take the already assembled double matrix professional SONIC record cleaning machine from its
packaging. Set it on a stable and horizontal surface (such as a desk or rack).
Please note that due to the weight of the record cleaning machine, the feet of the device can cause
marks on soft surfaces. Due to the warm air outlet on the bottom of the
double matrix professional
SONIC
, the surface on which it rests should be heat resistant to a minimum of 60°C.
3.1 Connect to the mains supply
To avoid using an additional extension cable, place the double matrix professional SONIC within 2
metres of an electrical wall outlet.
Connect the supplied mains cable rst to the IEC socket on the back of the double matrix professional
SONIC and then to the electrical wall outlet. Press the switch on the IEC socket and position it to “I”.
Please read the whole user manual before cleaning your rst record.
Note: Voltages are referenced to EU countries with 230V mains power.
In other countries the mains voltage and frequency may vary (e.g. USA 115V/60Hz.)
The correct operating voltage can be found on the back of the device on the product
information label (Pic. 1).
The mains cable supplied should be of the type appropriate for your country. Please ensure that the
mains voltage of your country also matches the mains voltage of the device. This information is also
on the product information label (see above).
If it does not match, please contact your Clearaudio dealer.
Pic. 1: Product information label on the back

Page / Seite 8 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
4. Operating elements
Please familiarise yourself with each of the operating elements shown above, which are described
in detail on the following pages.
1
8
7
65
4
32
10 9
13
12
11
14
1Automatic / Superclean start / ECO mode 8Antistatic arm
2Manual platter rotation on & o /
Automatic o 9IEC socket with power switch
3Cleaning uid application 10 Drain tube with sealing plug
4Rotational direction selection 11 Cleaning uid reservoir lling cap
5Rotational speed adjust 12 Cleaning uid reservoir level indication
LEDs
6Vacuum drying on / o 13 Cleaning & vacuum arm
7Seal record clamp 14 Removeable microber stripes
Pic. 2: View from above

Made in Germany Page / Seite 9
User manual / Bedienungsanleitung
5. Functions
5.1 Automatic cleaning
Automatic / Superclean / Eco mode
The “Auto” button has a multifunction for dierent automatic cleaning modes.
• Eco mode
Hold the button for 3 seconds, the LED ring of the “AUTO” button will blink fast.
This mode is the most economical in terms of cleaning time and cleaning uid consumption.
• Automatic mode
Press the button once, the LED ring of the button will shine constantly.
This mode is a normal cleaning mode.
• Super-Clean mode
Press the button twice, the LED ring will blink slowly.
This mode is for very dirty records and will run the “AUTOMATIC MODE” twice.
If the respective cleaning program (Auto mode / Super-Clean / ECO mode) is nished, the blue ring
of the button will ash short and expire completely.
You can cancel every automatic mode by pressing the button “POWER” shortly.
5.2 Manual cleaning
• Power
Starts the platter rotating and switches on the sonic cleaning function.
• Liquid
Press to apply cleaning uid to the upper and lower sides of the record.
• Platter
Press to change the platter’s rotational direction.
• Platter Speed
Turn to adjust the platter rotation speed.
• Vacuum
Activates the suction drying process while also stopping the sonic cleaning function.

Page / Seite 10 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
Pic. 3: Turning the antistaic unit
5.3 Automatic and manual cleaning
• Antistatic brush
The antistatic brush arm is used to discharge any static that is
generated during the drying process. After completion of the
automatic programs or manual cleaning, the dry record should
pass the antistatic brush at least for 2-3 full rotations. Turn the
antistatic arm above the record to the outer point. The record will
start to turn and the constructed static will derived.
The antistatic function can only be activated with opened suction
arm.
After 2-3 full rotations, turn the antistatic arm back to the start position. The rotation of the record
ends automatically.
5.4 LED level indicator
Shows the level of cleaning uid currently in the reservoir (0% to 100%).

Made in Germany Page / Seite 11
User manual / Bedienungsanleitung
6. Initial start-up
6.1 Filling the cleaning uid reservoir
Place the funnel supplied into the lling hole (Pic. 2, No. 11, page 7) and ll the uid reservoir with
the cleaning uid provided (max. 0.4l).
Pay attention to the LED level indicator so as not to over-ll. For eective cleaning we recommend
using only Clearaudio cleaning uids (available at www.analogshop.de).
6.2 Opening the cleaning and vacuum arm and placing the record
Lift the upper cleaning arm and swing it to the left to open the cleaning and vacuum assembly.
Turn the knob of the Seal record clamp anticlockwise to release the clamp then place the record to
be cleaned on the label-sized platter. Now put the Seal record clamp back on the spindle and press
down gently while rotating the knob clockwise to secure the record in position and create a seal to
protect the record label from uid damage.
Closing the cleaning and vacuum unit
Now you can swing the upper cleaning arm to the right to close the cleaning and vacuum assembly.
6.3 Automatic cleaning
The new features of the
double matrix professional SONIC “AUTO”, “SUPERCLEAN” and “ECO MODE”
provide fully automatic and ecient cleaning (see function 5.1, page 8). You only have to manually
activate the antistatic brush.
6.4 Manual cleaning
To set your own parameters for the cleaning process manually:
• After you have placed and xed the record with the Seal record clamp, close the cleaning and
vacuum assembly.
• Press the “POWER” button to start the sonic cleaning function and rotation of the record.
• Press the “LIQUID” button to apply cleaning uid to the record. Holding down the button for
longer applies more uid. Adjust this according to the desired quantity of cleaning uid.
• After about 3 or 4 rotations, change the platter direction by pressing the “PLATTER” button. We
recommend 3 or 4 turns in each direction. By turning the “PLATTER SPEED” knob you can vary
the rotational speed to further ne tune the cleaning process.
• Once you are happy with the cleaning, press the “VACUUM” button. This will stop the sonic
cleaning function and start the vacuum drying process. After about 3 or 4 rotations, when the
record is visibly dry, switch o the suction by pressing the “VACUUM” button again.
• Press the “POWER” button to stop the record rotation.
• Open the suction arm. Now start the antistatic function (see 5.3, page 9). After completion of the
antistatic function the manual cleaning is complete and you can remove your record.

Page / Seite 12 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
7. Maintenance
7.1 Changing the microfiber stripes
To change the microfiber stripes, remove the upper arm of
the cleaning and vacuum assembly by loosening the side-
mounted hex screw, then pulling the upper arm gently
upwards.
Next, release the microfiber supporters from the upper and
lower cleaning arms by applying a light pressure at the end of
each microfiber supporter, and then remove them
(see Pic. 4).
Now peel the old microfiber strips away from their supporters.
Before attaching new microfiber strips, it is important to
ensure that any grease, dust or residual glue from the old
microfiber strips is removed from the microfiber supporter.
Apply new microfiber strips, firmly pressing them onto the supporters.
We recommend changing the microber strips after approx. 100 cleaning programs, though this will
depend on the condition of the records cleaned.
7.2 Cleaning and draining the waste uid tank
Over time it is possible for residue to settle in the waste uid tank which could potentially block the
drain tube. To avoid this happening you should periodically clean the waste uid tank.
1. Remove the upper suction arm after loosening the side-mounted screw with the delivered hex
wrench (#5) and pulling it gently and steadily upwards.
2. Place the lling funnel into the suction tube.
3. To ush the waste tank, we recommend 250ml warm water, which you pour in the waste tank.
4. Let the warm water sit in the waste tank for approximately 20 minutes, then drain it by removing
the sealing plug from the drain hose and put the end of the drain hose into a bowl (or something
else) which is positioned deeper. Repeat this process until the drained ushing water is clean and
does not contain any reside.
After the cleaning, you can remount the suction arm. Please make sure to insert the arm
straight and without any pressure. Otherwise the arm may tilt and damage the machine.
Please note:
If you take the machine into operation again, the drain tube must always be closed by
the stopper, so that the vacuum pump can generate the required vacuum for suction.
Only through this we can guarantee a lasting and full function of your cleaning machine.
The drain tube at the rear should not be pushed back into the machine.
This could bend the tube and the leaking uid could damage the cleaning machine.
Pic. 4: Lift the microber supporter by
pressing down on one end.

Made in Germany Page / Seite 13
User manual / Bedienungsanleitung
8. Points to note
8.1 Waste uid tank:
The waste uid tank has a capacity of approx. 0.5 litres. We recommend regular draining of the
tank, to avoid any damage. Please note that with intensive use waste uid can evaporate completely
leaving residue within the waste tank.
To empty the waste uid tank:
1. On the back panel you will nd the drain tube, which can be pulled out (see Pic. 2, No. 10, page
7).
2. Remove the sealing plug from the drain tube.
3. To empty the waste uid tank completely, tilt the double matrix professional SONIC about 45° to
the rear. Once emptied, be sure to reseal the drain tube again.
CAUTION:
Do not re-use waste cleaning uid. This could damage your machine.
8.2 Cleaning the uid reservoir:
The cleaning uid reservoir has a capacity of approx. 0.4 litres. We recommend that you ll the tank
only with Clearaudio cleaning uids (available at www.analogshop.de) to receive the best cleaning
results.
To empty the uid reservoir tank (to ship the unit or to switch to another liquid), close the suction
unit and disconnect the upper supply tube.
Insert the end of the disconnected supply tube into a container, squeeze the lower supply tube and
hold the “LIQUID” button pressed. Now the unit will start to pump the uid.
We recommend a second person for help.
Please note:
If you won’t be using the double matrix professional SONIC for more than a week, we
suggest that you drain the remaining uid from the cleaning uid reservoir.
CAUTION:
Never use foaming or corrosive liquids, or water.
This could cause serious damage to your machine and
may void your warranty.
Pic. 5: Warning

Page / Seite 14 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
8.3 LED level indicator:
When the last LED (0%) of the level indicator is ashing (Pic. 2 No. 12, page 7), the functions “AUTO”,
“SUPERCLEAN” and in manual mode, the function “LIQUID”, will be deactivated. This protects the
liquid pump from damage. To re-activate these functions, ll the cleaning uid reservoir with more
cleaning uid.
CAUTION:
Ensure that the double matrix professional SONIC is switched on when lling the cleaning uid
reservoir so that you can read the current level on the LED level indicator.
8.4 Auto protect:
If the cleaning and vacuum assembly is open (Fig. 2, No. 13, page 7), all functions of the buttons
are deactivated. The antistatic arm can still cause the rotation of the platter axis when turned to
the middle.
Important:
After use, the double matrix professional SONIC should always turned o by pressing
the switch on the IEC socket to the position “0”.
If you won‘t be using the unit for more than a week, we recommend to unplug the
cleaning machine.

Made in Germany Page / Seite 15
User manual / Bedienungsanleitung
9. Technical data
Main features: • Left and right turning
• Cleaning of both sides
• Vacuum engine with overheat sensor
• Integrated antistatic brushes device for discharge of static
charge
• Automatic uid application
• Sonic Option - gentle and high ecient cleaning through
vibration
• Automatic cleaning process with only one button
• As an option: cleaning of each cleaning step by hand control
Power consumption: Max. consumption: Approx. 450 watts
O mode: 0 watts (by switching o at the rear of the machine)
Weight: Approx. 16kg
Dimensions (W/D/H): Approx. 16.14 x 15.16 x 10.87 (incl. Record clamp)
Approx. 16.14. x 15.16 x 11.42 (with Acrylic Dustcover)
Dimensions (W/D/H): Approx. 410 x 385 x 276 (incl. Record clamp)
Approx. 410 x 385 x 290 (with Acrylic Dustcover)
Manufacturer warranty*: 3 years*
* Provided that the warranty card is correctly completed and returned to Clearaudio, or your product is registered
online at https://clearaudio.de/en/service/registration.php, within 14 days of purchase.

Page / Seite 16 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
Sehr geehrte clearaudio - Kundin, sehr geehrter clearaudio - Kunde,
Sie haben sich für eine clearaudio
double matrix professional SONIC Schallplattenwaschmaschine
entschieden – ein High-End Produkt der clearaudio electronic GmbH – wir beglückwünschen Sie
dazu.
Das Reinigen von verschmutzten Schallplatten führt zu einer deutlichen Klangverbesserung; dies gilt
übrigens auch für neue Schallplatten, da bei der Pressung häug Verunreinigungen und Rückstände
des Trennmittels zwischen Matrize und Vinyl in den Rillen haften bleiben. Mit der integrierten
Schallreinigungstechnologie der clearaudio double matrix professional SONIC lassen sich diese
Verunreinigungen rillentief entfernen.
Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, um Fehlbedienungen zu
vermeiden und ein optimales Reinigungsergebnis zu erzielen.
Verwendete Bauteile und Verarbeitung
Bei der clearaudio
double matrix professional SONIC verwenden wir ausschließlich hochwertigste
Bauteile, die nahezu unverwüstlich sind. Alle gewählten Komponenten sind für eine intensive
und dauerhafte Nutzung ausgelegt. Die Schalldämmmatten im Innern der Plattenwaschmaschine
reduzieren die Geräuschentwicklung auf ein angenehmes Minimum.
Sowohl die Absaug- und Antistatikarme als auch die Seal Plattenklemme sind aus massivem
Aluminium hergestellt. Unser Qualitätsanspruch drückt sich in einer Garantieleistung von 3 Jahren
aus, wenn uns die ausgefüllte Garantiekarte innerhalb von 14 Tagen nach Kauf eingeschickt wird.
Wir bedanken uns für Ihren Kauf und für das in uns gesetzte Vertrauen und wünschen Ihnen viel
Spaß mit Ihrer neuen double matrix professional SONIC .
Mögliches Zubehör:
Abdeckhaube für double matrix professional
SONIC (Art. Nr. AC143)
Reinigungsüssigkeit (z.B. pure
groove Art. Nr. AC048)
In verschiedenen Größen und
Ausführungen verfügbar
Mikrofaser-Ersatzstreifen für
double matrix professional SONIC
(Art. Nr. AC062/DMPS)

Made in Germany Page / Seite 17
User manual / Bedienungsanleitung
Sicherheitshinweise
1. Transport
• Beim Transport der clearaudio double matrix professional SONIC stets die Originalverpackung
verwenden. Achten Sie darauf, das Gerät genau so zu verpacken, wie es ausgeliefert wurde.
Nur in originalverpacktem Zustand ist ein sicherer Transport gewährleistet. Beim Verpacken
umgekehrt verfahren, wie bei dem Aufbau und der Inbetriebnahme beschrieben.
Achten Sie ebenfalls darauf, dass beide Tanks (Vorratsbehälter und
Flüssigkeitsauangbehälter) vor Verpacken der Maschine entleert werden!
2. Service
• Die double matrix professional SONIC darf während der Garantiezeit nur vom Hersteller repariert
werden, ansonsten erlischt der Garantieanspruch. Der Service für alle clearaudio Produkte
sollte ausschließlich beim Fachhändler erfolgen.
• Sollte trotz des hohen Fertigungsstandards eine Reparatur erforderlich werden, muss die
clearaudio
smart matrix SILENT Plattenwaschmaschine über Ihren Fachhandel an clearaudio
eingeschickt werden.
Bitte beachten: Der Garantieanspruch erlischt, wenn schäumende oder ätzende Flüssigkeiten
verwendet werden.
3. Sicherheitshinweise
CE-Markierung
Dieses Elektronikprodukt entspricht den gültigen Richtlinien zur Erlangung des CE-Zeichens.
Entsorgung
Dieses Produkt darf nicht zusammen mit Restmüll entsorgt werden.
WEEE Reg.Nr.: DE26004446
Sichtkontrolle
Das Netzkabel des Gerätes niemals mit feuchten oder nassen Händen anfassen.
Die regelmäßige Sichtkontrolle einer eventuell defekten Isolierung der Anschlussleitung ist
darüber hinaus zu Ihrer eigenen Sicherheit empfehlenswert. Eine beschädigte Zuleitung
sofort vom Fachmann auswechseln lassen!
Das Gerät ist für den Betrieb in beheizten Räumen konzipiert.
Haftungsausschluss:
Die Firma clearaudio übernimmt keinerlei Haftung für Schäden an Tonträgern, die aus
unsachgemäßer Handhabung resultieren!

Page / Seite 18 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
Inhaltsverzeichnis
1. Lieferumfang............................................................................19
2. Eigenschaften der double matrix professional SONIC .............20
3. Aufstellen und Anschließen......................................................21
4. Bedienelemente .......................................................................22
5. Funktionen ...............................................................................23 - 24
6. Erstinbetriebnahme..................................................................25
7. Instandhaltung ........................................................................26 - 27
8. Wichtiges und Wissenswertes .................................................27 - 28
9. Technische Daten.....................................................................29
Garantieinformationen.................................................................30 - 31

Made in Germany Page / Seite 19
User manual / Bedienungsanleitung
1. Lieferumfang
Die clearaudio double matrix professional SONIC verlässt unsere Fertigung in einer besonders
sicheren und auf das Produkt abgestimmten Verpackung. Überzeugen Sie sich davon, dass keine
äußeren Beschädigungen vorliegen, insbesondere keine Transportschäden.
Heben Sie die Verpackung auf, damit diese für eventuell spätere Transporte zur Verfügung steht.
Nur die Original – Verpackung bietet den notwendigen Schutz und die Stabilität beim Transport.
Bitte kontrollieren Sie den Lieferumfang Ihrer neu erworbenen
double matrix professional SONIC Schallplattenwaschmaschine auf deren
Vollständigkeit: 1. Komplett montierte Schallplatten-
waschmaschine
2. Seal - Plattenklemme
3. Einfülltrichter
4. Kaltgerätestecker
(Abweichungen je nach Länderspezikation)
5. Ersatz – Mikrofaserbezüge 6 Stück
6. groove care Reinigungsüssigkeit 500 ml *
7. Verschlussdeckel für Vorratsbehälter
(auf Einfüllönung angebracht)
8. Schlauchstopfen
(am Ablassschlauch angebracht)
9. Singleadapter
10. Innensechskantschlüssel #5
11. Garantiekarte
12. Qualitätskarte
Im Falle einer unvollständigen Lieferung wenden Sie sich bitte umgehend an ihren clearaudio
Fachhändler, bei dem Sie das Produkt erworben haben.
* Wir raten davon ab ihre Schellackplatten mit groove care zu reinigen, da diese mit Vinyl-
Reinigungsmittel leicht angegrien werden.
Bitte verwenden Sie hierfür nur spezielle Flüssigkeiten die für diesen Einsatz speziell konzipiert sind
(z. B. clearaudio pure groove Shellac, Art. Nr. AC048/SH, erhätlich bei Ihrem Fachhändler oder
direkt bei clearaudio unter www.analogshop.de).

Page / Seite 20 © clearaudio electronic GmbH, 2022-01
User manual / Bedienungsanleitung
2. Eigenschaften der double matrix professional SONIC im Überblick
• Integrierte Sonic – Vibrierende Reinigungselemente
Rillentiefe Reinigungswirkung bei evtl. Pressrückständen oder hartnäckigen Verschmutzungen.
• Reinigung von LPs, EPs und Singles
• Gleichzeitige Reinigung beider Seiten
Eziente und gründliche Reinigung beider Seiten in einem Waschgang.
• Manuelle Bedienung
Hier können Sie die Reinigungsphasen selbst denieren.
• Links- / Rechtslauf
Wechsel der Drehrichtung
• Stufenlose Drehzahlregulierung
Drehzahl bei manueller Bedienung wählbar um gründlichere Ergebnisse zu erzielen.
• LED – Füllstandanzeige
Informiert über den aktuellen Flüssigkeitsstand des Vorratsbehälters.
• Adaptive Absaugbürsten
Leicht zu wechselnde Reinigungselemente passen sich der Oberäche der Schallplatte an.
• Seal – Plattenklemme
Sorgt für sicheren Halt der Schallplatte.
• Auto Mode
Im Auto Mode läuft ein vollautomatisches Reinigungsprogramm ab.
• Super Clean Mode
Ein vollautomatisiertes Reinigungsprogramm für sehr stark verschmutze Schallplatten.
• ECO Mode
Ein verkürztes Reinigungsprogramm.