CLS FOCUS T DMX User manual

CLS FOCUS T DMX
Manual Version 1.0 January 2014
Ceiling 350ºWall 135º 50.000 h220 grDriver excl. 15º - 65º 1 x Cree/
Luxeon
IP20 24 VDC Max.
4 Watt
3000K
CRI>85
2700K
CRI>85
3000K
CRI>95
4000K
CRI>85
DMX
512
DMX
dimmable
2
INDEX
Index 2
Safety information 2
Content 2
Technical 3
CONTENT
SAFETY INFORMATION
Ambiance
Max. 40º
Block access
below the work
area when
maintaining
the unit
Disconnect the
power supply
before
installing or
maintaining
Use a source
of AC power
that complies
local electrical
codes
Don’t install in
a ammable
or explosive
area
Warning!
Some surfaces
can be hot
Do not stare
into the LED
Don’t modify
or install
genuine parts
on this product
Qualied
technician
Make sure all
connectors are
connected
properly
Specifications 3
Accessories 3
Installation 4
Programming 5
List of symbols 7
Ceiling 350ºWall 135º 50.000h220grDriverexcl. 15º - 65º 1x Cree/
Luxeon
IP20 24VDC Max.
4Watt
3000K
CRI>85
2700K
CRI>85
3000K
CRI>95
4000K
CRI>85
DMX
512
DMX
dimmable
Version 1.0 June 2013

3 4
143 mm
86 mm
135º
36 mm
28 mm
20 mm
36 mm
Rail
39 mm
Tools
TECHNICAL
SPECIFICATIONS
LED: 1 x Luxeon / Cree
Available colours: CRI>85: 2700K, 3000K, 4000K
CRI>95: 3000K
Beam angle: 15º to 65º
Power supply: 24 VDC
Power consumption: Max. 4 Watt
Housing: Black aluminum brushed
Weight: 220 gr
IP value: IP20
Measurements: 143 x 86 x 36 mm (hxwxd)
Ambient temperature: -10º C till +40º C
ACCESSORIES
Y110802 CLS 1-fase rail + data 1 meter black
Y110812 CLS 1-fase rail + data 2 meter black
Y110822 CLS 1-fase rail + data 3 meter black
Y110822-** CLS 1-fase rail + data, other colors on request
Y110838 CLS 1-fase rail + data mid-rail feed black
Y110839 CLS 1-fase rail + data mid feed i-coupler black
Y110840 CLS 1-fase rail + data end feed right black
Y110841 CLS 1-fase rail + data end feed left black
Y110842 CLS 1-fase rail + data end cap black
Y110843 CLS 1-fase rail + data l-coupler PE outside black
Y110844 CLS 1-fase rail + data l-coupler PE inside black
Y110845 CLS 1-fase rail + data T-coupler PE inside black
Y110846 CLS 1-fase rail + data T-coupler PE inside left black
Y110847 CLS 1-fase rail + data coupler black
Y110850 CLS 1-fase rail + data X-coupler black
Y110851 CLS 1-fase rail + data Flex-coupler black
Y110854-** CLS 1-fase rail + data, other colors on request
2
4
3
1
Beam angle
15º - 65º
Swivel
0º - 135º
INSTALLATION

65
PROGRAMMING
3
2
1
4
To store the
conguration
press & hold
the button for
3 seconds
Via DMX the Focus can be configured. After setting the DMX to the desired values just press the
button on the Focus PCB. Press and hold the button for approximately 3 seconds (step 3), when
button is pressed the focus will turn on and when programming has finished the Focus will turn off
again. When light does not turn off after 3 seconds repower and try again.
Addressing
To configure address (1-255) set data on DMX channel 1:
0 = no changes are made.
1-255 = address is set to 1-255.
To configure address (256-510) set data on DMX channel 2:
0 = no changes are made.
1-255 = address is set to 256-510.
Examples:
Address 132 => set data 132 on DMX channel 1.
Address 278 => set data 23 on DMX channel 2.
Static brightness
When DMX fails or is not present the programmed brightness will become active.
To configure the static function set DMX channel 3 to the desired brightness.
0 = no changes are made.
1 = function disabled.
2-255 = brightness of the fixture.
Soft dim option
When active the Focus will have soft dim curve.
To configure the soft dim function set data on DMX channel 4
0 = no changes are made.
<127 = function turned off.
>127 = function turned on.

7 8
LIST OF SYMBOLS
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Pressure
Maximum pressure on
the fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the
LEDs in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided
against the intrusion of the product
Cutting length
Indicated by the
cutting marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In different Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W or RGB-A
Dynamic White
Stepless control of white light
DMX input
Fixture works on DMX512
protocol
Combined product
Compose your own fixture
Warranty
3 years warranty on the product
Energy label
Conformité Européenne
CE marking for free marketability of
industrial goods within the EU
DMX
512
r
h
ø w d
Dimmable
1-10 Volt, Phase, individual
or DMX dimmable
2014 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated
companies disclaim liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss
occasioned by the use of, inability to use or reliance on the information contained in this manual. No part of this manual may
be reproduced, in any form or by any means, without permission in writing from CLS-LED BV. Other legal information can
be found in our General conditions,found on the back of your CLS-LED BV invoice, inside the CLS catalogue or on our website
www.cls-led.com/voorwaarden.pdf