CLS REVO COMPACT TRACK DMX User manual

www.cls-led.com www.cls-led.com
CLS REVO COMPACT TRACK DMX
Manual Version 1.3 April 2017
Ceiling 360º 360º 1,30 kg 50.000 h8º 12º 30º 61º 12 x 46º 4 x
Cree/Luxeon
IP20
100-240
VAC
Max.
10 Watt
3000K
2700K
AmberBlue RedGreen
6500K5000K DMX
dimmable
Magno
dimming
DMX
512
4000K
DRIVER
Included
DRIVER
Internal
2
INDEX
CONTENT
SAFETY INFORMATION
Ambiance
Max. 40º
Block access
below the work
area when
maintaining
the unit
Use a source
of AC power
that complies to
local electrical
codes
Disconnect the
power supply
before installing
or maintaining
Don’t install in
a ammable
or explosive
area
Warning!
Some surfaces
can be hot
Do not stare
into the LED
Don’t modify
or install
genuine parts
on this product
Qualied
technician
Make sure all
connectors are
connected
properly
Ceiling 360º 360º 1,30kg 50.000h8º 12º 30º 61º 12x 46º 4x
Cree/Luxeon
IP20
100-240
VAC
Max.
10Watt
3000K
2700K
AmberBlue RedGreen
6500K5000K DMX
dimmable
Magno
dimming
DMX
512
4000K
DRIVER
Included
DRIVER
Internal
Index 2
Safety information 2
Content 2
Technical 3
Specifications 3
Installation Global adapter 4
Installation Eutrac adapter 5
Lens replacement 6
Programming 7
Lens index 9
Accessories 10
List of symbols 11

www.cls-led.com www.cls-led.com
3 4
190 mm
175 mm
45 mm
78 mm
84 mm
78 mm 78 mm
110 mm
78 mm
46 mm
100 mm
EUTRAC
Global adapter
Tools T20
TECHNICAL
SPECIFICATIONS
LED: 4 x Cree or Luxeon Rebel
Available colours: Extra warm white 2700K, warm white 3000K,
neutral white 4000K, fresh white 5000K
cold white 6500K, amber, royal blue and red
Lenses: 8º, 12º, 30º, 61º and 12x46º
Power supply: 100 ~ 240 VAC
Power consumption: Max. 10 Watt
Housing: Anodised aluminum
Weight: 1,3 kg
IP value: IP20
Measurements: 175 x 78 x 78 mm (hxwxd)
Ambient temperature: -30º C till +40º C
2
3
1
CLS Global
3-phase rail + data
5
4
DMX signal
Set the adapter
to the desired phase
by turning the wheel
Position
indicator
# Y108511-B
# Y108511-G
# Y110935
# Y110938
INSTALLATION
With Global adapter

www.cls-led.com www.cls-led.com
65
INSTALLATION
With Eutrac adapter
2a
2b
1
CLS Eutrac
3-phase rail
+ data
3
5
# Y108152
90°- 0 - 90°
B
A
90°- 0 - 90°
B
4
# Y108155
Position
indicator
LENS REPLACEMENT
1
4
3
2
42
13
Glass
Front plate
Lensholder
4x
Secure in
order
T20
T20
Glass
Front plate
Lensholder
Make sure that
the items are clean
and the rubber
sealing is correctly
in place!

www.cls-led.com www.cls-led.com
7 8
PROGRAMMING
Via DMX the REVO Compact Track can be configured. After setting the DMX to the desired values just hold the magnet on the
REVO’s backplate at the ‘bullseye’. Hold the magnet for approximately 3 seconds (step 3), when holding the magnet on the
REVO it will turn on and when programming has finished the REVO will turn off again. When the light does not turn off after 3
seconds repower and try again.
Addressing
To configure address (1-255) set data on DMX channel 1:
0 = no changes are made.
1-255 = address is set to 1-255.
To configure address (256-508) set data on DMX channel 2:
0 = no changes are made.
1-253 = address is set to 256-508.
Examples:
Address 132 => set data 132 on DMX channel 1.
Address 278 => set data 23 on DMX channel 2.
Static brightness
When DMX fails or is not present the programmed brightness will become active.
To configure the static function set DMX channel 3 to the desired brightness.
0 = no changes are made.
1 = function disabled.
2-255 = brightness of the fixture.
Soft dim option
When active the REVO Compact Track will have soft dim curve.
To configure the soft dim function set data on DMX channel 4.
0 = no changes are made.
<127 = function turned off.
>127 = function turned on.
# Y106015
NOTE: The Magno Dimming function only works when no DMX is connected.
12
34
Place the
magnet
at the indicated
‘bullseye’ on the
backplate
To store the
conguration
hold the magnet
for 3 seconds
on the REVO
1. Place the magnet on the backplate, at the indicated spot.
2. The REVO starts slowly dimming from 100 – 1% in approx. 30 seconds.
The dimming is very accurate and precise, so steps are very small.
3. At the desired intensity level, take away the magnet.
4. After 10 seconds the REVO flashes one time, the value has been stored on the internal memory.
5. When powering up the REVO, the stored value will be recalled from the internal memory.
6. If you want to have a lower value, replace the magnet and the REVO dims further to lower levels.
To store the new setting repeat step 3 – 5.
7. If the REVO is being dimmed to Level 0 and you have not programmed a value, it will automatically
start at Level 100 and dim back from 100 - 1%.
MAGNO DIMMING
Only works when no DMX is connected

www.cls-led.com www.cls-led.com
109
LENS INDEX
1
5
2
34
Superspot 8º
Medium Flood 30º
Spot 12º
Wide Flood 61º
Elliptical 12x46º
ACCESSORIES
ACCESSORIES
Eutrac - black
Y108112 CLS Eutrac 3-phase rail + data 1 meter black
Y108122 CLS Eutrac 3-phase rail + data 2 meter black
Y108132 CLS Eutrac 3-phase rail + data 3 meter black
Y108142 CLS Eutrac 3-phase rail + data 4 meter black
Y108152 CLS Eutrac 3-phase rail + data end feed right, black
Y108155 CLS Eutrac 3-phase rail + data end feed left, black
Y108158 CLS Eutrac 3-phase rail + data middle feed black
Y108162 CLS Eutrac 3-phase rail + data end cap black
Y108175 CLS Eutrac 3-phase rail + data L-coupler inner black
Y108178 CLS Eutrac 3-phase rail + data flex coupler black
Y108199 CLS Eutrac 3-phase + data monopoint black
Eutrac - white
Y108133 CLS Eutrac 3-phase rail + data 3 meter white
Y108153 CLS Eutrac 3-phase rail + data end feed right, white
Y108163 CLS Eutrac 3-phase rail + data end cap white
Y106015 CLS Magnet pin (10 pcs)
ACCESSORIES Global
Global - black
Y108501-B CLS Global 3-phase rail + data 1 meter black
Y108502-B CLS Global 3-phase rail + data 2 meter black
Y108503-B CLS Global 3-phase rail + data 3 meter black
Y108504-B CLS Global 3-phase rail + data 4 meter black
Y108511-B CLS Global 3-phase rail + data end feed right, black
Y108512-B CLS Global 3-phase rail + data end feed left, black
Y108513-B CLS Global 3-phase rail + data middle feed black
Y108515-B CLS Global 3-phase rail + data L-coupler inner black
Y108516-B CLS Global 3-phase rail + data L-coupler outer black
Y110938 CLS Global 3-phase rail + data end cap black
Global - grey
Y108501-G CLS Global 3-phase rail + data 1 meter grey
Y108502-G CLS Global 3-phase rail + data 2 meter grey
Y108503-G CLS Global 3-phase rail + data 3 meter grey
Y108504-G CLS Global 3-phase rail + data 4 meter grey
Y108511-G CLS Global 3-phase rail + data end feed right, grey
Y108512-G CLS Global 3-phase rail + data end feed left, grey
Y108513-G CLS Global 3-phase rail + data middle feed grey
Y108515-G CLS Global 3-phase rail + data L-coupler inner grey
Y108516-G CLS Global 3-phase rail + data L-coupler outer grey
Y110935 CLS Global 3-phase rail + data end cap grey

www.cls-led.com www.cls-led.com
1211
LIST OF SYMBOLS
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Internal or external
Pressure
Maximum pressure on
the fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the
LEDs in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided
against the intrusion of the product
Cutting length
Indicated by the
cutting marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In different Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
DMX input
Fixture works on DMX512
protocol
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Combined product
Compose your own fixture
Warranty
3 or 5 years warranty on
the product
Energy label
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
DMX
512
r
h
ø w d
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
DRIVER
Included
DRIVER
External
Retail & Food LED modules
Clothing, furniture, kitchens,
jewellery, shoes, bread, meat,
fish & vegetables & fruit.
Lightsource
Equipped with a Citizen or a Xicato
LED module
Bluetooth controlled
By Casambi
2017 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated companies
disclaim liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by the
use of, inability to use or reliance on the information contained in this manual. No part of this manual may be reproduced, in
any form or by any means, without permission in writing from CLS-LED BV. Other legal information can be found in our General
conditions,found on the back of your CLS-LED BV invoice, inside the CLS catalogue or on our website
www.cls-led.com/General-Terms.pdf