CLS REVO COLOUR FLOW RGBW User manual

www.cls-led.com www.cls-led.com
CLS REVO COLOUR FLOW
Manual Version 2.4 December 2017
FloorWall Ceiling 360º 360º 1,50 kg 50.000 h8º 12º 30º 61º 12 x 46º
8 x Luxeon IP67 RGB-A Max.
700mA
Max.
18 Watt
RGB-W
DRIVER
Excluded
DRIVER
External
2
INDEX
Index 2
Safety information 2
Content 2
Technical 3
Specifications 3
Installation 4
CONTENT
SAFETY INFORMATION
Ambiance
Max. 40º
Block access
below the work
area when
maintaining
the unit
Use a source
of AC power
that complies to
local electrical
codes
Disconnect the
power supply
before installing
or maintaining
Don’t install in
a ammable
or explosive
area
Warning!
Some surfaces
can be hot
Do not stare
into the LED
Don’t modify
or install
genuine parts
on this product
Qualied
technician
Make sure all
connectors are
connected
properly
LDC connection cable 5
Assemble REVO Colour Flow cable 5
Wiring diagram 6
Lens index 6
Lens replacement 7
List of symbols 8
FloorWall Ceiling 360º 360º 1,50kg 50.000h8º 12º 30º 61º 12 x 46º
8x Luxeon IP67 RGB-A Max.
700mA
Max.
18Watt
RGB-W
DRIVER
Excluded
DRIVER
External

www.cls-led.com www.cls-led.com
3 4
100 mm
40 mm
100 mm
116 mm
70 mm
116 mm
100 mm
100 mm
ø 10 mm
175 mm
Tools M10 T20
TECHNICAL
SPECIFICATIONS
LED: 8 x Cree or Luxeon Rebel
Available colours: RGBA & RGBW
Lenses: 8º, 12º, 30º, 61º and 12x46º
Power supply: Max. 700mA
Power consumption: Max. 18 Watt
Housing: Anodised aluminum
Weight: 1,9 kg
IP value: IP67
Measurements: 175 x 130 x 100 mm (hxwxd)
Ambient temperature: -30º C till +40º C
ACCESSORIES
110415 CLS REVO lens kit superspot 8° 8 pcs of lenses
110425 CLS REVO lens kit spot 12° 8 pcs of lenses
110435 CLS REVO lens kit medium flood 30° 8 pcs of lenses
110445 CLS REVO lens kit wide flood 61° 8 pcs of lenses
110455 CLS REVO lens kit elliptical 12x46° 8 pcs of lenses
113000 CLS LDC-41 DMX LED dimmer 4 channels 0.35-1A per channel
707028 CLS Zense DMX controller + built in 4 amp RGB dimmer
871992 CLS mold set, straight 8-26mm
871995 CLS mold set Paguro grey
Y110760 CLS Connector Male for Revo Colour Flow, 5-PIN, IP67
Y110761 CLS Connector Female for Revo Colour Flow, 5-PIN, IP67
Y110762 CLS Shortcut Connector for Revo colourflow, 5-PIN, IP67
Y110781 CLS REVO Colour Flow connectioncable,IP67, 2 meters complete
Y110782 CLS REVO Colour Flow connectioncable,IP67, 4 meters complete
Y110783 CLS REVO Colour Flow connectioncable,IP67, 8 meters complete
4
5
2
3* Y11078X REVO Colour flow connection cable
Endplug
1
Secure
Female
Position
indicator
INSTALLATION

www.cls-led.com www.cls-led.com
65
WIRING DIAGRAM
CLS BT power supply 24V/48V
RJ45 (UTP) cable
CLS Zense DMX controller +
built in 4 amp RGB dimmer
# 707028
CLS LDC-41 DMX LED dimmer
4 channels 0.35-1A per channel
# 113000
CLS REVO Colour Flow
RGBA or RGBW
# R-6-X-XX-X
CLS REVO Colour Flow
Shortcircuit connector
# Y110762
CLS REVO Colour Flow
connectioncable, complete IP67
# Y11078X
CLS LDC connectioncable for
the REVO Colour Flow
Red wire
Green wire
Blue wire
White wire
Black wire
83 mm (h)
175 mm (h)
100 mm (d)
83 mm (w)
Min. 1 pcs and max.1 pcs of REVO Colour Flow on a BT 20.24 LED power supply
Min. 1 pcs and max.2 pcs of REVO Colour Flow on a BT 45.24 LED power supply
Min. 1 pcs and max.3 pcs of REVO Colour Flow on a BT 75.24 LED power supply
Min. 1 pcs and max.3 pcs of REVO Colour Flow on a BT 120.24 LED power supply
Min. 1 pcs and max.3 pcs of REVO Colour Flow on a BT 240.24 LED power supply
Min. 4 pcs and max.4 pcs of REVO Colour Flow on a BT 75.48 LED power supply
Min. 4 pcs and max.6 pcs of REVO Colour Flow on a BT 120.48 LED power supply
Min. 4 pcs and max.6 pcs of REVO Colour Flow on a BT 240.48 LED power supply
• Make sure the LDC-41 is configured to max. 700mA
• LDC-41 till last REVO CF total cable length is max. 25 m
• Use the Shortcircuit connector to close the installation
LENS INDEX
1
5
23
4
Superspot 8º Medium Flood 30º Spot 12º
Wide Flood 61º Elliptical 12x46º
LDC CONNECTION CABLE
12
b
6 mm
50 mm
Cut of the Male
connector
3
Harnas
Wires
LDC Connectioncable
1 = Red wire
2 = Green wire
3 = Blue wire
4 = White wire
5 = Black wire
1
2
3
4
5
ASSEMBLE REVO COLOUR FLOW CABLE
1
43
b
2
Cable connector female Cable connector male
11
22
3
3
4
4
5
5
3 mm
20 mm
1 = Red wire
2 = Green wire
3 = Blue wire
4 = White wire
5 = Black wire
1 = Red wire
2 = Green wire
3 = Blue wire
4 = White wire
5 = Black wire
Pin Assignment
back view
Pin Assignment
back view
Solder the wires
in the connector,
then assamble
the connector
back in order
Seal
Cable ø:
4.0 mm ~
7.6 mm
Cable ø:
7.6 mm ~
9.6 mm
Strip harnas
Strip Wires
B1/ B2

www.cls-led.com www.cls-led.com
7 8
LENS REPLACEMENT
2
4
Glass
Front plate
Lensholder
1
3
4x
Secure in
order
1
2
3
4
T20
Glass
Front plate
Lensholder
Make sure that
the items are clean
and the rubber
sealing is correctly
in place!
T20
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Internal or external
Pressure
Maximum pressure on
the fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the
LEDs in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided
against the intrusion of the product
Cutting length
Indicated by the
cutting marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In different Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
DMX input
Fixture works on DMX512
protocol
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Combined product
Compose your own fixture
Warranty
3 or 5 years warranty on
the product
Energy label
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
DMX
512
r
h
ø w d
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
DRIVER
Included
DRIVER
External
Retail & Food LED modules
Clothing, furniture, kitchens,
jewellery, shoes, bread, meat,
fish & vegetables & fruit.
Lightsource
Equipped with a Citizen or a Xicato
LED module
Bluetooth controlled
By Casambi
LIST OF SYMBOLS