Coaster Paulita 110712 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
110712
DINING CHAIR
REVISION 0: 12/06/2021
PAGE 1 OF5
COASTERFURNITURE.COM

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
PARTS IDENTIFICATION
A
SEAT 1PC B BASE 1PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
5 MINUTES
PAGE 2 OF 2
ITEM:110712

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
HARDWARE IDENTIFICATION
1
ALLEN SCREW
(M6*16)
4PC
2
ALLEN KEY
(4MM)
1PC
3
OPEN-ENDED
WRENCH
(φ10)
1PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 3 OF 3
ITEM:110712
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
5 MINUTES

ITEM:110712
ASSEMBLY INSTRUCTIONS
STEP:1 STEP:2
Please check and make sure all the screws are tighten properly.
COMPLETE
360°swivel base
COASTERFURNITURE.COM
PAGE 4 OF 4

ITEM:110712
ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PAGE 5 OF 5