Coaster 3393 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
3393
CORNER CURIO CABINET
REVISION 0 : 02/02/2018
REVISION 1 : 07/01/2019
REVISION 2 : 10/27/2022
PAGE 1 OF10
COASTERFURNITURE.COM

ITEM:3393
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
COASTERFURNITURE.COM
TOP DOOR GLASS
IN
TOP FRONT POST
JN
TOP BACK PANEL
HN
TOP BACK POST
2PCS
FN
BOTTOM
GN
TOP SIDE POST
KN
BOTTOM BACK PANEL
LN
2PCS
2PCS
2PCS
BOTTOM BACK POST
1PC
BOTTOM FRONT POST
SHELF
1PC
2PCS
1PC
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
45 MINUTES
BN
AN
2PCS
1PC
BOTTOM SIDE POST
TOP
CN
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2PCS
2PCS
DN
EN
PAGE 2 OF 10

ITEM:3393
ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PARTS IDENTIFICATION
ON
BOTTOM BACK MIRROR
NN
MN
PN
TOP BACK MIRROR
4PCS
RN
TOP FRONT GLASS
QN
BOTTOM FRONT GLASS
2PCS
BOTTOM DOOR GLASS
SHELF GLASS
1PC
1PC
2PCS
2PCS
PAGE 3 OF 10

ITEM:3393
ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
7
PLASTIC SCREWS
(Ø8 x 8mm)
8
SHELF SUPPORTS
(15 x 11 x 18mm)
20PCS
GLASS DOOR HINGES
(40 x12 x 21mm BLK)
4PCS
GLASS DOOR NIPS
(40 x 23 x 10mm BLK)
9
16PCS
2
1
20PCS
20PCS
CAM NUT
(1/4" x 13mm RBW)
BOLTS
(1/4" x 41mm RBW)
3
6
4
WOOD SCREWS
(6 x 14mm BLK)
5
WOOD DOWEL
( Ø8 x 20mm)
2PCS
8PCS
HARDWARE IDENTIFICATION
MAGNET
(46 x 30 x 20mm BLK)
4PCS
80PCS
PAGE 4 OF 10

ITEM:3393
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 5 OF 10

ITEM:3393
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
TOP BOTTOM
COASTERFURNITURE.COM
PAGE 6 OF 10

ITEM:3393
ASSEMBLY INSTRUCTIONS
STEP 5 STEP 6
COASTERFURNITURE.COM
PAGE 7 OF 10

ITEM:3393
ASSEMBLY INSTRUCTIONS
STEP 7 STEP 9
COASTERFURNITURE.COM
PAGE 8 OF 10
COMPLETE

ITEM:3393
Note : Dimension tolerance ±5%
COASTERFURNITURE.COM
PAGE 9 OF 10

ITEM:3393
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
COASTERFURNITURE.COM
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the restraint
strap through the larger hole in each mounting bracket. Bring both ends together and slide the flat end through
the locking end and draw it through until all slack is removed. Confirm that the strap is securely laced and
locked.
STEP 3
PAGE 10 OF 10
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
Attach a bracket securely to the back top rail of the
furniture using short screw provided, through the
smaller hole.
Locate the other bracket on the wall over a wall stud and
two inches below the mounting bracket secured to the
back of the furniture. Attach the wall stud using the long
screw provided, through the smaller hole.
STEP 2
WALL
WALL