Coaster Kirby 192692 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
192692
Side Chair
REVISION 0 : 03/17/2022 PAGE 1 OF 5 COASTERFURNITURE.COM
Dining

ITEM: 192692
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
NOTE:
Quantities shown are for one chair.
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
RIGHT SIDE STRETCHER
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
13 MINUTES
PARTS IDENTIFICATION
A BACK FRAME 1PC
D LEFT FRONT LEG 1PC
PAGE 2 OF 5
B SEAT FRAME 1PC
C WOODEN SEAT 1PC
G 1PC
E RIGHT FRONT LEG 1PC
F 1PCLEFT SIDE STRETCHER

ITEM: 192692
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
HARDWARE IDENTIFICATION
1ALLEN WRENCH
(M4 - BLK) 1PC
2SHORT BOLT
(M6 x 40mm - RBW) 2PCS
3MEDIUM BOLT
(M6 x 60mm - RBW) 4PCS
4LONG BOLT
(M6 x 70mm - RBW) 4PCS
5LOCK WASHER
(M6 - RBW) 10PCS
6FLAT WASHER
(M6 - RBW) 10PCS
7 5PCS
8 4PCS
NOTE:
Quantities shown are for one chair.
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 3 OF 5
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
13 MINUTES
LONG FLAT HEAD SCREW
(M4 x 38mm- RBW)
SHORT FLAT HEAD SCREW
(M4 x 25mm- RBW)

ITEM: 192692
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 4 OF 5

ITEM: 192692
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COMPLETE
COASTERFURNITURE.COM
PAGE 5 OF 5

ITEM: 192692
COASTERFURNITURE.COM
Note: Dimension tolerance ±5%
16.25"
35.50"
6.25"
6.75"
13.75"
17.50"
14.50"
15.75"
18.00"
14.50"
17.00" 19.00"
16.50"
18.75"