Combi EGGSHOCK User manual

Combi Child Car Seat
THE S ISOFIX EGGSHOCK
Before Use
Using Each Part
Installing to and
Uninstalling from
the Vehicle
User Manual
This product is an ISOFIX child car seat for specific vehicles,
and is certified according to the UN R129/03 standard.
●This product can be installed to vehicle seats approved
for installation of ISOFIX child car seats.
However, this does not mean that this child car seat can
be installed to any vehicle seat equipped with ISOFIX
anchors (bars). When using the child car seat, always
check the vehicle compliance and check the user manual
of the vehicle.
●Applicable child height and weight: Heights up to 105 cm or
weights up to 19.0 kg．
For the safety of the child, please read this user manual
carefully before use and use the child car seat properly.
To avoid causing stress to the child, avoid continuous
long-time usage and give the child a break from the
child car seat about once every hour.
● Store this user manual in the storage pocket of the
base cover.
Maintenance and
Other
Do not use forward facing before the child’s age exceeds
15 months or before the child’s height exceeds 76cm.
DANGER
CAUTION

Before Use
1
Before Use
Before Use …………………………………………… 2
Name of parts ………………………………………… 3
Use conditions ………………………………………… 7
Applicable vehicle seats ……………………………… 9
Inapplicable vehicle seats ……………………………10
For safe use of the child car seat ……………………11
Using Each Part
Using the reclining function …………………………17
Rotating the seat ………………………………………18
Installing and removing the seat ……………………19
Adjusting the baby shoulder belt position …………21
Seating the child ………………………………………23
Unseating the child ……………………………………26
Installing to and Uninstalling from the Vehicle
Preparation of installation …………………………… 27
Installing to the Vehicle ……………………………… 29
Checklist after installation …………………………… 32
Uninstalling from the vehicle ………………………… 33
Maintenance and Other
Using the inner cushion ……………………………… 35
Using the canopy ……………………………………… 37
Attaching and removing the covers ………………… 40
Maintenance method ………………………………… 43
Storage and disposal ………………………………… 44
Contents

Before Use
2
Thank you for purchasing this Combi child
car seat.For the safety of the child, please
read this user manual carefully before use
and use the child car seat properly.
The child car seat is designed to reduce
injury to the child in case of traffic accident,
etc. However, there is no guarantee that the
child car seat can completely protect the
child from injury. A child using the child
car seat must be accompanied by an adult.
Labels
The descriptions in this manual use the labels DANGER,
WARNING and CAUTION to indicate important items for
safe and proper use of the child car seat. These are very
important items that indicate the potential consequences
if not followed properly, and are categorized according to
the level of severity. Always make sure to follow these items.
Before Use
Label Label contents
DANGER
Improper handling will result in imminent
risk of death or serious injury.
WARNING
Improper handling may result in death or
serious injury.
CAUTION
Improper handling may result in injury or
damage to property.
Useful hints for using the child car seat.
<Use of the second-hand product>
·DO NOT use the product with unknown use
history, especially the product with unknown
accident history.
·If there are cracks, large scratches, or loose
fasteners on the product, do not use it. Strong
impacts may be caused due to a collision or
drop of the product.

Before Use
3
Name of parts
Check that all parts are present before use.
Store the receipt (proof of purchase) together with this manual.
Package contents
※This manual uses simplified illustrations to help
users easily understand operation and handling,
and there may be slight differences from the
actual product.
Main body Inner cushion
Base cover
User manual
(this manual)
ISOFIX insertion guide
Canopy

Before Use
4
Supporting leg
Base
Seat
Main
body
Head guard
The terms“ main body,”“ seat,”“ head
guard,” “base,” and “supporting leg”
refer to the parts shown below.

Before Use
5
Name of parts
Front
Length adjustment button
Supporting leg base
Insert tongue
Buckle
Reclining adjustment
lever
Head guard adjustment
lever
Baby belt
adjustment
button
Adjustment belt
Revolving
release
lever

Before Use
6
Side Back
Product name/
Lot No. sticker
Base cover
User manual
storage pocket
Seat release lever
Connector adjustment lever
Connector
Lock release
button
Connector
release lever

Before Use
Rearward Facing (installation facing rearward relative to driving direction)
Applicable child height Use conditions for inner cushion
Height 40cm Height 87cm Height from 40cm to less than 65cm
Always use.
Height from
65cm to 87cm
Do not use.
Baby shoulder belt position
Adjust the baby shoulder
belt so that it is at or below the
shoulder height.
This section describes how to determine the installation direction and use the inner cushion according to the child’s height.
Same
Below
Above
7
Use conditions
Be sure to attach
the inner cushion
correctly and
make it fit the
child's body
completely
before use.
WARNING

Forward facing (installation facing forward relative to driving direction)
Applicable child height Use conditions for inner cushion
Age 15 months old and
height 76cm or more
Height 105cm or less
or weight 19.0 kg or less
Do not use.
Baby shoulder belt position
Adjust the baby shoulder belt
so that it is at or slightly above
the child’s shoulder height.
Do not use forward facing before the
child’s age exceeds 15 months or
before the child’s height exceeds 76cm.
DANGER
Same
Below
Above
Before Use
8

Before Use
9
Applicable vehicle seats
This child car seat can be installed to vehicle seats
approved for installation of ISOFIX child car seats.
However, this does not mean that the child car seat
can be installed to any vehicle equipped with ISOFIX
anchors (bars).
When using the child car seat, always check the vehicle
compliance and check the user manual of the vehicle
to make sure the ISOFIX size classes noted below are
supported.
ISOFIX anchoring system
ISOFIX anchors are metal fixtures (bars) provided
between the vehicle backrest and seat in order
to install an ISOFIX child car seat. The name and
position may differ according to the vehicle, so always
check the user manual of the vehicle.
Child car seat facing Anchors
Rearward facing R1, R2, R3
Forward facing F3
ISOFIX size classes of this product
ISOFIX
anchor (bar)
※While using forward facing, it may not be suitable to all vehicles
for installation unless the backrest is the most upright.

Do not use the child car seat if it cannot be secured firmly to the vehicle seat, even if none of the conditions noted below apply.
Do not install the child car seat to a vehicle seat that meets any of the following conditions.
Vehicle seat facing
rearwards or sideways
relative to the driving
direction.
●Vehicle seat equipped
with a front airbag.
… Installation is possible
to a vehicle seat with
only a side airbag.
●Vehicle seat with an
extremely uneven surface
that prevents stable
installation.
Vehicle seat where the
supporting leg base rests on
a vehicle seat slide rail or an
underfloor storage space,
etc.
●Vehicle seat with a seat surface too high or too low
from the floor or with a floor shape that prevents the
supporting leg from being installed properly.
Vehicle seat not
equipped with ISOFIX
anchors (bars).
Before Use
10
Inapplicable vehicle seats

DANGER
●Do not seat a child who does
not satisfy the use conditions,
or install the child car seat to an
inapplicable vehicle seat.
●Do not install the child car seat by
a method other than described in
this user manual and indicated on
the main body.
●Do not install the child car seat
with the supporting leg retracted.
Always extend the supporting leg
and adjust to the proper length.
●This product cannot be secured
using the vehicle seatbelt.
●Do not install the child car seat
to a vehicle seat equipped with
a front airbag. In case of collision,
the deploying airbag will strongly
impact the child car seat, which is
dangerous to the child.
Improper handling will result in imminent risk of death or serious injury.
Before Use
11
For safe use of the child car seat

Before Use
12
Evacuation in case of emergency
● Do not allow the child to stand,
crouch or kneel on the child car seat.
DANGER
●The vehicle headrest may interfere
with the seat of the child car seat
and prevent reclining and rotating
operation or prevent the seat from
locking in place.
Remove the vehicle headrest if
possible.If the vehicle headrest
cannot be removed, install the child
car seat to a different vehicle seat.
In case of accident
or other emergency,
an accompanying
adult should press
the buckle button
to release the baby
belt and evacuate the
child from the vehicle
immediately.

Before Use
WARNING
●Always keep the baby belt fitting
snugly. A loose belt may become
wrapped around the child’s neck
and result in suffocation.
●Do not use the child car seat if the
baby belt is damaged in any way.
Contact Combi’s Customer Service
Center for repair.
●
The child car seat may suffer structural
damage in the event of collision or
even if it is dropped one time or
falls from a high level. In this case,
immediately stop using the child car
seat even if no damage is visible.
●
Center for repair if the buckle
Contact Combi’s Customer Service
becomes jammed with dirt, food
crumbs or other objects and
cannot be fastened securely or is
too stiff to release easily.
Improper handling may result in death or serious injury.
●Always fasten the adjustment
belt to the velcro of the seat cover
when using the child car seat.
A
loose belt may become wrapped
around the child’s neck and result
in suffocation.
●Do not leave the child in the vehicle
unattended.On sunny days the cabin
temperature may rise and pose the risk
of dehydration. Other accident may also
occur. An adult should always accompany
the child.
13
For safe use of the child car seat

WARNING
●Do not install the child car seat to a
vehicle seat where it may obstruct
the exit of other passengers from
the vehicle in an emergency.
●Always secure the child car seat
with the connectors even when
the child is not seated.
Sudden
braking or collision may cause an
unsecured child car seat to move
inside the vehicle and interfere
with driving.
●Do not modify or improperly repair
the child car seat.
Before Use
14

●Make sure the child car seat does
not get jammed between the vehicle
doors or other movable parts.
●Exposing the child car seat to direct
sunlight may cause the main body,
insert tongue and other parts to
become hot and burn the child.
Touch each part and check that it is
not too hot before seating the child.
●Be especially careful of unsecured
items inside the vehicle.Sudden
braking or collision may cause
unsecured items to strike the child.
CAUTION
●
● Users should be especially careful when fastening or
adjusting the child car seat to prevent fingernails or
artificial nails from becoming jammed in gaps or moving parts.
●Depending on the shape and surface
material (leather, etc.) of the vehicle
seat, scratches or marks may remain
after installation.
Improper handling may result in injury or damage to property.
Before Use
15
For safe use of the child car seat
Do not operate or adjust the child car seat while
driving. Also make sure that other children riding in the
vehicle do not touch or play with the child car seat.
Do not install, remove or carry the
safety seat with a child sitting on it.
●
●
Using the child seat as a normal chair may cause
injuries due to overturn. Do not use the product in
ways not mentioned herein.
●
Do not use the child car
seat with the seat cover
and other sewn parts or the
urethane and other cushioning
removed. Also do not replace
these parts with parts not specifically
authorized by Combi for this product.
(This may negatively affect safety
performance in the event of a collision.)

To ensure proper function of the child car seat, check the following items before use.
Try to rock the base in all directions to
make sure that the child car seat is securely
fastened to the vehicle seat.
※ The illustration shows an example of forward facing installation.
Daily inspection
Check that the baby belt is adjusted to the
correct position.
Check that the baby belt fits snugly against
the child’s body.
Check that the insert tongue is inserted firmly
into the buckle and the insert color indicator
has changed to green.
Adjust the length of the supporting leg so
that the supporting leg base rests on the
vehicle floor.
Check that the connectors are fastened
securely to the ISOFIX anchors of the vehicle.
Check that the connector adjustment lever
color indicators show the locked condition
(“green” is shown).
Check that the connector release button
color indicators show the locked condition
(“green” is shown).
WARNING
● Check that the baby belt is not
twisted or loose.
●
Always pull down the baby waist
belt to firmly hold the pelvis position.
Before Use
16

17
Using Each Part
Using the reclining function
The reclining angle can be adjusted in 5 levels according to the condition of the child.
①While pulling forward the reclining adjustment lever,
②Adjust the seat reclining angle. (5 levels in both
forward and rearward facing mode)
1Release the reclining adjustment lever and try to rock
the seat forward and back to make sure that it is
locked in place.
2
●Keep the child’s hands, fingers and other body parts
away when reclining the seat. Also take care for the
hands of other passengers. Hands, fingers and other
body parts may become caught, possibly resulting in injury.
●Take care not to let dirt, food crumbs or other foreign
matter enter the gaps between the parts.
This may result in malfunction.
CAUTION
After performing reclining operation, make sure that the
reclining adjustment lever returns to its original position with
a “click” sound and the seat is locked in place. (This may
negatively affect safety performance in the event of a
collision.)
Reclining adjustment lever
①
WARNING

Using Each Part
●
when rotating the seat.Also take care for the hands of
Keep the child’s hands, fingers and other body parts away
other passengers. Hands, fingers and other body parts may
become caught, possibly resulting in injury.
●Take care not to let dirt, food crumbs or other
foreign matter enter the gaps between the parts.
This may result in malfunction.
●
Do not rotate the seat while driving.
CAUTION
DANGER
After performing rotating operation, make
sure that the revolving release lever returns
to its original position with a “Click” sound
and the seat is locked in place. (This may
negatively affect safety performance in the
event of a collision.)
The seat can be rotated for easier seating and unseating of the child.
While pushing up the revolving release lever, rotate the seat.
Once the seat starts to rotate, you can release the revolving
release lever. Rotate the seat until it locks in place with a “click”
sound in the forward or rearward facing position.
1Rock the seat to the left and right to
make sure that it is locked in place.
※ Due to the structure, the seat may feel slightly
shaky and rattle even when it is locked. This
is normal and does not affect normal use.
2
①
Revolving release
lever
Click!
②
WARNING
18
Rotating the seat
①
②
Do not drive with the seat of the
child car seat rotated sideways.The
child car seat will not function
properly, which is dangerous to the child.
●
In rearward mode, to avoid difficult
operation of the revolving release lever,
please adjust the seat reclining angle to
the most upright state.

Using Each Part
①While pushing up the revolving release lever,
Rotate the seat so that it face 90°relative to
the base. (Refer to “Rotating the seat”.)
1①Grip the seat release lever located on the left and right
handles,
Lift up the seat.
※Both levers must be operated at the same time in
order to lift up the seat.
2
Removing the seat
The seat can be removed for easy installation to the vehicle.
②
Revolving release lever
①
Seat release lever
Handle
①②
19
Installing and removing the seat
②
②