Commax CAV-43MG User manual

�Thank you for purchasing COMMAX produc s.
�Please carefully read his User’s Guide (in par icular, precau ions for safe y) before using a produc and follow
ins ruc ions o use a produc exac ly.
�The company is no responsible for any safe y acciden s caused by abnormal opera ion of he produc .
Tel.
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
Color Video Door Phone CAV-43MG
User Manual

Table of Contents
1.Greeting
●Thank you for purchasing a COMMAX product
●Please, use the product after carefully reading this Manual
●This type of videophone can be used in apartments, villas and other buildings as a
multifunctional device with door opening, telephone conversation and guard station
control function
1
1.Greeting················································································································ 1
2. Warnings and caution ····························································································· 2
3. Part name and functions ······················································································· 4
4. Operating ············································································································· 5
5. Set up····················································································································· 6
6. RESET ··················································································································· 9
7. The use of lobby phone (In case there are common lobby) ···············································10
8. Wiring Installation Method··························································································11
9. PART NAME AND FUNCTIONS··················································································12
10. Specications ········································································································12

2
Please follow the things described below in order to prevent any
danger or property damage.
Warning
Caution
Pr hibiti n.
N disassembly
N t uch
Must f ll w strictly.
Sh ws plugging ut the p wer c rd
with ut an excepti n
Sh ws the warning and cauti n f r an electric sh ck.
Sh ws the warning and cauti n f r a fire.
It may cause a min r damage r injury if vi lated.
It may cause a seri us damage r injury if
vi lated.
Power & Installation
Warning
Please d n’t use several
pr ducts at the same time n
ne p wer s cket.
·It may cause a fire due t an
abn rmal verheating.
Please d n’t bend the p wer
cable excessively r it may
cause an electric sh ck.
·fire when using a damaged
p wer cable.
Please d n’t handle the
p wer cable with a wet hand.
·It may cause an electric
sh ck.
Please plug ut the p wer
cable fr m the s cket when
n t using it f r a l ng peri d
f time.
·It may sh rten the pr duct
lifespan r cause a fire.
Please d n’t install the
pr duct in the place where
there is much il, sm ke r
humidity.
·It may cause an electric
sh ck r fire.
Please d n’t install the
pr duct with the lightening
and thunder.
·It may cause an electric
sh ck r fire.
Please d n’t use and c nnect
this pr duct with ther
pr ducts with different rated
v ltage
·It may cause a dis rder r
fire.
When installing the pr duct
that generates heat, please
install the pr duct away fr m
the wall (10cm) f r the
ventilati n.
·It may cause a fire due t
the increased internal
temperature.
2. Warnings and caution

3
Cleaning & Use
Please d n’t disassemble,
repair r rebuild this pr duct
arbitrarily (please c ntact the
service center if a repair is
needed.
·It may cause an electric
sh ck r fire.
Please plug the p wer cable
firmly int the inner end
·It may cause a fire.
Please h ld the plug tightly
when unplugging the p wer
cable (a part f the c pper
wire may be disc nnected if
the grabbing is nly made n
the c rd when pulling ut the
cable).
·It may cause an electric
sh ck r fire
When c nnecting the p wer
cables after cutting the cable,
please install the pr duct with
p wer ff
·It may cause an electric
sh ck r fire
When installing the pr duct,
please fix it firmly while using
the wall-m unting unit and
screws.
·It may cause an injury fr m
the falling bject.
Please be careful when using
an AC circuit breaker since
there is a p ssibility f an
electric sh ck.
When cleaning the pr duct,
please rub it with a s ft and
dry cl th after plugging ut
the p wer cable. (Please
d n’t use any chemical
pr ducts such as wax,
benzene, alc h l r cleanser.)
Please d n’t dr p the
pr duct n the gr und and
d n’t apply a sh ck .
·It may cause a failure.
Please use the designated
c nnecti n cable within the
maximum calling distance
designated f r the pr duct
·It may reduce the pr duct
perf rmance.
Please check the use v ltage
and current f r the DC- nly
pr ducts and use the
appr priate rectifier.
·It may cause a fire.
Please av id direct rays f the
sun r heating devices at a
time f installati n.
·It may cause a fire.
Please d n’t install the
pr duct n an unstable place
r small supp rt b ard.
·It may cause an injury if it
falls d wn while in use.
If an abn rmal s und, burning
smell r sm ke is c ming ut
f the pr duct, please plug ut
the p wer cable and c ntact a
service center.
·It may cause an electric
sh ck r fire.
Please d n’t insert any
metallic r burnable materials
int the ventilati n h le.
·It may cause an electric
sh ck r fire.
Please use nly the designated
batteries f r the pr ducts f
using DC p wer.
·It may cause an electric
sh ck r fire.
Cleaning & UsePower & Installation
Warning
Caution

3.Part names and functions
4
내 용
1
Power ON/OFF switch
7
Door release button (UP button) : It’s for door
release or moving to the other menu item
2
Power LED
8
MENU(Menu button)
3
Microphone
9
Talk button
4
Monitor(LCD) : It shows the visitor’s image.
10
Speaker
5
Monitor button(SELECT button)
11
Terminal for external connection
6
Guard button (DOWN button)
번호 내 용번호
1.
Power ON/OFF switch : It’s for the product’s ON/OFF.
2.
Power LED : It shows the product’s ON status.
3.
Microphone
4.
Monitor(LCD) : It shows the visitor’s image.
5.
Monitor button(SELECT button) : It shows the status of camera, during the menu selection.
6.
Guard button (DOWN button) : It’s for calling to the guard station or moving the other menu item.
7.
Door release button (UP button) : It’s for door release or moving to the other menu item
8.
MENU(Menu button) :
It’s available to move to product’s setup menu for adjusting the screen and receiver volume.
9.
Talk button: It is used for a response to a visitor’s calling and talk.
10.
Speaker
11.
Terminal for external connection :
It’s for the connection of door camera and lobby and guard station

4-1. Call from door camera
①
When a visitor at the door calls, it chimes and the image of the visitor is shown on the screen.
②
By pressing MONITOR BUTTON, you can talk to a person at the door. If you press
DOOR RELEASE BUTTON, the door is released.
(It is possible only when the door camera is interlocked with door release function)
③
The chime bell rings when there is a call from (common entrance/guard station) while you
are communicating with a person at the door. If you press the button (common entrance :
MONITOR BUTTON / guard station: guard button), the phone call from the door is cut off
and then a call from common entrance or guard station is connected.
④
The screen is turned off automatically after 60seconds from starting talking. If you want to
check screen again, please press MONITOR BUTTON
⑤
To finish to talk, press TALK BUTTON
4-2. Call from lobby phone
①
When a visitor at common entrance calls, it chimes and the image of the visitor is shown on
the screen.
②
By pressing MONITOR BUTTON, you can talk to a person at the common entrance.
(The screen is turned off automatically after 60 seconds from pressing MONITOR BUTTON to
talk.)
③
The chime bell rings when there is a call from door while you are communication to a
person at the common entrance. If you press MONITOR BUTTON, the phone call from
common entrance is cut off and then a call from the door is connected.
④
If you DOOR RELEASE BUTTON while you are communicating with a person at common
entrance, common entrance is released with door release sound and the phone call is cut off.
(1) Call from guard station
①
it chimes when there is a call from guard station.
②
By pressing GUARD BUTTON to talk.
③
If there is a call from door while you are communicating with a person at guardstation,
it chimes and the image of visitors is shown. If you press MONITORBUTTON, the phone call
from guard station is cut off.
(2) To make a phone call to the guard station
①
By pressing GUARD BUTTON, you can call the guard station.
②
If someone at the guard station answers your call, you can start to talk.
4.Operating
5
4-3. Talk with guard station

6
- (Calling is available with the camera by pressing the talk button during the monitoring.)
(2) In case only lobby is installed
Click monitor button once in standby mode to check the images from the lobby and
click the button twice to return to standby mode
- (Calling is available by pressing the talk button during the monitoring.)
•
Use 4 function keys positioned right side of the product.
Start or end menu : MENU
Select or Input : SELECT button(Monitor button)
Move upward / Move right : UP button (Door release button)
Move downward / Move left : DOWN button (Guard station button)
5-1. Screen and receiver volume adjustment
Press the MENU button in use of conversation or monitoring, then adjust DOOR(LOBBY),
VIDEO SET, UTIL SET and INFORMATION using UP/DOWN button.
5-1-1. DOOR(LOBBY) VIDEO SET(Adjusting BRIGHTNESS/CONTRAST/COLOR)
In video adjustment mode 5-1, move to DOOR(LOBBY) VIDEO SET and press SELECT button
(LOBBY VIDEO SET should be done during calling from lobby phone or talking with lobby phone)
(1) BRIGHTNESS : Adjust BRIGHTNESS
(2) CONTRAST : Adjust CONTRAST
(3) COLOR : Adjust COLOR
※ Adjusting Brightness/Contrast/Color
①
Move to DOOR(LOBBY) VIDEO SET in display setting mode 5-1 and press
SELECT BUTTON. And then press the SELECT button with UP/DOWN button, move to the
related item.
②
Press the SELECT button to enter the menu.
.
4-4. Monitoring
(1)In case both lobby and individual cameras are installed Click the monitor button once in
standby mode to check the images from Individual camera. Click the button twice for Lobby
images and three times for returning to standby mode. (Note. It is not available during the talk.
During the monitoring
Set up
③
Adjust the values with UP/DOWN button
. Interlocking with Digital Door Lock
This product can be interlocked with Digital Door Lock via RF module and please refer to
connection diagram.

7
①
In Setting mode to move DOOR VIDEO SET please press SELECT button
Press UP/DOWN button to move RESET category.
②
Press SELECT button to select category.
③
Press UP/DOWN button to select YES.
④
Press SELECT button
[Precaution: Screen Setting and Reset functions must be adjust separately ( DOOR / LOBBY )]
(5) EXIT : Return to previous MENU.
5-1-2. UTILITY (Other Functions)
5-1의 In Screen Setting Mode move to UTILITY Option and press SELECT button to enter
to the MENU.
(1) SPEAKER VOLUME : Adjust the volume for receiver sound
※ Setting Method
①
In Setting Mode to move UTILITY option and press SELECT button to control UP/DOWN
button to move SPEAK-VOLUME category.
②
Press SELECT button to select category.
③
Press UP/DOWN button to set Volume control.
④
When you set, press SELECT button to save
(2) SCREEN MODE : to set screen ratio
①
5-1In Setting Mode to move UTILITY category and press SELECT button to move
SCREEN MODEL by UP/DOWN button.
②
Press SELECT button to select category.
③
Press UP/DOWN button to set screen rate and then please press SELECT button to save.
- ZOOM: 4:3 Ratio ZOOM IN (Expanded image of Real Rate),
- 4:3: Real Ratio of the Camera Image.
- WIDE: Image of 16:9 Ratio will be shown on the screen.
(3) EXIT : Return to previous MENU.
5-1-3. CHIME-BELL VOLUME
In Screen Setting Mode move to UTILITY Option and press SELECT button to enter to the MENU.
UP Button ( OPEN ) DOWN Button ( GUARD ) UTILITY ( EXTRA FUNCTION & INFORMATION )
(1) CHIME-BELL VOLUME : To set calling mute and adjust volume
※ Setting Method
①
5-1-2 Move to UTILITY category and press SELECT button(Monitor) to move
CHIME-BELL VOLUME by UP/DOWN button.
④
After adjusting, press the SELECT button and save the setup.
(4) RESET : It initializes the screen setup.
※ Setting Method

5-2. System Configuration
In Stand By Mode press the Menu button for 3 seconds to enter the System Setting Mode.
UP BUTTON-OPEN DOWN BOTTON-GUARD HOME SET-HOUSEHOLD AN INFORMATION
5-2-1. HOME SET (Input the Residence Information)
5-2 Press the moving button in System Setting Mode to move to HOME SET and press
SELECT button.
(1) HOME ID : Adjust the Building / Apartment Number Information.
※ Configuration Method
①
Press the moving button in System Setting Mode to move to HOME SET and press
SELECT button. Press UP/DOWN button to move HOME ID.
②
Press SELECT button to select category.
③
It will be display actual builng number/house number in monitor.
[Default Value is Building 1234 – Apartment Number 5678]
④
Press UP/DOWN button to select number and input the number.
: It is in total 8 digits, and must not have empty
(Ex : In case of Building 101 , Apartment No. 1 ( Input 0101 – 0001)
⑤
If you finish to input the last 8 digits please press the SELECT button to save.
(2) PASSWORD : Password setting of the residence
※ Configuration Method
①
5-2 First move to HOME SET and press SELECT button and move to PASSWORD by
UP/DOWN button.
②
Press SELECT button to select category.
(To move PASSWORD category and press SELECT button to enter PASSWORD Mode)
③
Press UP/DOWN button to select number and input the number.
(Input the new PASSWORD and automatically saved as 1234 and then you have to
reset PASSWORD.)
[Precaution : Avoid repetitive numbers. For security propose 0000, 1234 and 4321
can’t be used as PASSWORD]
④
When you finish to input number and Press SELECT button to save. Press SELECT
button to save the configuration.
(3) LOBBY ID : If connect up to 2 lobby phones, you have to sletct main Lobby phone.
8
④
Press the SELECT button when you set up.
(2) EXIT : Return to previous MENU.
②
Press SELECT button to select category.
③
Press UP/DOWN button to control CHIME-BELL VOLUME. The user can check all of
CHIME-BELL VOULME size.

※ Setting Method
①
5-2 In SYSTEM SETTING MODE to move HOME SET category and press SELECT
buttom to move LOBBY ID by UP/DOWN button.
②
Press SELECT button to select category (Standard: 01)
③
Press UP/DOWN button to input from 01 to 39. (MAIN LOBBY ID)
④
Press SELECT button to save the configuration.
(4) EXIT : Return to previous MENU.
5-2-2. INFORMATION (Product and Version Information)
5-1 When you move the INFORMATION category Product Information will be shown.
(1) MODEL : Display Product Name.
(2) VERSION : Display the Product Program Version.
(3) HOME ID : Display Residence Building / Apartment Number Information.
(4) VIDEO : The monitor (LCD) display for video standard transmission method.
(5) TOUCH : Display the Touch Program Version.
(6) SOURCE : The monitor(LCD) display the position of camera currently
(LOBBY/COMMONENTRANCE)
In Stand By Mode press the door release button and Guard buttonfor 3 seconds to inicial.
※ Precaution :When you reset all of the program please be careful to erase all of the
informations ( Screen , CHIME-BELL VOULME,households and building number etc.)
9
6.RESET