Commax CIOT-D20P User manual

Contens
2
1. Part Names
2. Wiring and Installation
3. Package Contents
4. Specification

3
1. Part Names
No. Contents No. Contents
1 MIC 6 Reset button (Press the button for 5 sec, You can initialize status of Camera
2 LED&CDS
7 Contact Port (Door Release)
3 Camera
4 Speaker
8 PoE
5 Call button

4
2. Wiring and Installation
①Fix a bracket on a wall with screws
②Connect UTP and Door release cable on the back side of a door camera
③Tighten a screw at the rear side of camera. *Overtightening may cause the O-ring to break.
④Put a Door camera unit into a wall bracket.
⑤Tighten a screw at the top side of a door camera.

5
*UTP & Contact Port Pin description
No. Color Contents
1 Red VCC 12V
2 Brown GND
3 Orange NC(1)
4 Yellow NO(1)
5 Green COM(1)
6 Blue NC(2)
7 Violet NO(2)
8 White COM(2)
1 TX+
2 TX-
3 RX+
4 POE+
5 POE +
6 RX-
7 POE-
8 POE-

6
3. Package Contents

7
4. Specification
Model
Spec CIOT-D20P
Wiring UTP (CAT.5e)
Voltage INPUT : PoE DC 36V ~ 54V
Power Consumption Standby :3W , Max :10W
Transmission Audio : VoIP(SIP Standard)
Wiring & Distance UTP (CAT.5e) Standard 70m
Temperature -10℃∼+40℃
Video H.264
Mount Type Surface
Angle 90˚
OS Linux
Fixel 2Mega Pixel FHD
Certification IP67
Dimension (mm) 59(W) X 164(H) X 42.1(D)