Commax DRC-4LN User manual

User Manual
Color Door Camera DRC-4LN
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.

1. Part Names. 3.Wiring and Connection
Instructions
※ Wiring #1, 2, 3, 4 on the back side of a door camera with a
monitor as shown in the picture
( #1: VOICE, #2: GND, #3: DC12V, #4: VIDEO )
2.Package contents

카메라
고정 스크류
현관카메라 벽걸이 브라켓
현관카메라 벽걸이 브라켓
고정 스크류
QTpQPp QRpXpRp TpSpUpVp
5.Specification
Wiring 4 wires(polarity)to a monitor
2 wires(non-polarity)to a electric door lock
NTSC or PAL STANDARD.
Angle Adjustment Upward 13°
Rated Voltage 12V (Supplied from monitor)
Sensor Type C-MOS (COLOR) - CVBS
Transmission Simultaneous communication
Minimum Illumination 0.1 Lux(within300mm)
LED Embedded LED(Night working)
Effective Viewing Angle
68°(H), 50°(V)
Operating Temperature
-10°C ~ +40°C
Dimension (mm) 99.8(W)×142.4(H)×35.2(D)
Diameter(pie) Ø0.5 Ø0.65 Ø0.8 Ø1
Distance(meter) 28m 50m 70m 115m
Model No. DRC-4LN
Distance between a door
camera and monitor
Video Transmission
Standard
4. Installation
1. Fix a bracket on a wall with screws
2. Match and connect monitor line
3. Connect the Door Release Connection Line
4. Put a door camera unit into a wall bracket
5. Tighten a screw at the bottom side of a door
camera.

Printed In Korea / 2021.05.105
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
Edited.2021.05.10