Commell HE-B71 User manual

HE-B71
PICMG 1.3 Half-size CPU Card
User’s Manual
Edition 1.2
2014/10/09

HE-B71 User’s Manual
Copyright
Copyright 2014, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and protected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of
their respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular
purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at HTUUhttp://www.commell.com.twUTU

HE-B71 User’s Manual
Packing List:
Please check the package content before you starting using the board.
Hardware:
HE-B71 PICMG 1.3 Half-size CPU Card x 1 (include Cooler Fan)
Cable Kit:
SATA Cable x 2
(OALSATA3-L)/ (1040529)
Printed Matters:
Driver CD (Including User’s Manual) x 1
USB2.0 Cable x 1
(
OALUSB
A
-1
)
/
(
1040172
)
PS/2 Keyboard & Mouse Cable x 1
(OALPS2/MKN)/ (1040551)
Dual COM PORT Cable x 1
(
OALES-BKU2
)
/
(
1040087
)
Audio Cable x 1
(OALPJ-HD)/ (1040120)
CRT cable x 1
(OALVGA-S-7)/ (1040556)
USB3.0 Cable
(
OALUSB3
)
/
(
1040531
)
Optional :
DVI module with bracket x 1
(BADPDVIP_A&OALDVI-DF13)/
(4120008021 & 1040483)

HE-B71 User’s Manual
Index
Chapter 1 <Introduction>..............................................................................1
1.1 <Product Overview>.....................................................................................1
1.2 <Product Specification>................................................................................2
1.3 <Mechanical Drawing>.................................................................................3
1.4 <Block Diagram>..........................................................................................4
Chapter 2 <Hardware Setup>........................................................................5
2.1 <Connector Location>..................................................................................5
2.2 <Jumper Location & Reference>..................................................................6
2.3 <Connector Reference>...............................................................................7
2.3.1 <Internal Connectors> .....................................................................7
2.3.2 <External Connectors>....................................................................7
2.4 <Memory Setup>..........................................................................................8
2.5 <CMOS & ATX Setup>.................................................................................9
2.6 <Serial ATA Interface>................................................................................10
2.7 <Ethernet Interface>................................................................................... 11
2.8 <Onboard Display Interface>......................................................................12
2.8.1 <External Display>.........................................................................12
2.8.2 <Internal Display>..........................................................................13
2.9 <Integrated Audio Interface>......................................................................18
2.10 <USB Interface>.......................................................................................19
2.11 <Serial Port>.............................................................................................21
2.12 <PCIe Mini Card Interface>......................................................................23
2.13 <GPIO and SMBUS Interface>.................................................................24
2.14 <Power Supply and Fan Interface >.........................................................25
2.14.1 <Power Input>(need Backplane)..................................................25
2.14.2 <Fan connector>..........................................................................26
2.15 <Switch and Indicator>.............................................................................27
Chapter 3 <System Setup> .........................................................................28
3.1 <Audio Configuration>................................................................................28

HE-B71 User’s Manual
3.2 <Display Properties Setting>......................................................................29
3.3 <SATA configuration>.................................................................................31
3.4 <SATA RAID Configuration>.......................................................................32
Chapter 4 <BIOS Setup> .............................................................................34
Appendix A <I/O Port Pin Assignment>.....................................................36
A.1 <Serial ATA Port>.......................................................................................36
A.2 <IrDA Port>................................................................................................36
A.3 <LAN Port>................................................................................................36
A.4 <LPC Port>................................................................................................36
Appendix B <Flash BIOS> ..........................................................................37
B.1 <Flash Tool> ..............................................................................................37
B.2 <Flash BIOS Procedure>...........................................................................37
Appendix C <Programming GPIO’s> .........................................................38
Appendix D <Programming Watchdog Timer >........................................39
Contact Information.....................................................................................40

HE-B71 User’s Manual
(This page is left for blank)

HE-B71 User’s Manual
-1-
Chapter 1 <Introduction>
1.1 <Product Overview>
HE-B71 the 4th Generation Intel of the PICMG 1.3 Half-size CPU Card, supports 4th
Generation Intel® Core™ i7, Core™ i5, Core™ i3, Celeron Mobile Processor and
features Intel DH82QM87 chipset, integrated HD Graphics, DDR3L memory, REALTEK
High Definition Audio, Serial ATA with AHCI and RAID function for a system and Intel
Gigabit LAN.
Intel Haswell Bridge Processor
The 4th Generation Intel® Core™ processor family mobile is the next generation of
64-bit, multi-core mobile processor built on 22- nanometer process technology. Based
on a new micro-architecture.
New features for Intel DH82QM87 chipset
The DH82QM87 chipset provides better CPU, graphics, media performance, flexibility
and more enhanced security that is suitable for a variety of intelligent systems the ideal
choice.
All in One multimedia solution
Based on Intel DH82QM87 chipset, the board provides high performance onboard
graphics, CRT, 24-bit dual channel LVDS interface, DisplayPort, DVI and 2.1 channels
High Definition Audio, to meet the very requirement of the multimedia application.
Flexible Extension Interface
The board provides one PCIe mini slot, in addition, the backplane provides one PCIe
x16 slot, one PCIe x4 or four PCIe x1.

HE-B71 User’s Manual
-2-
1.2 <Product Specification>
General Specification
Form Factor PICMG 1.3 Half-size CPU Card
CPU 4th Generation Intel® Core™ i7, Core™ i5, Core™ i3, Celeron® Mobile
Processor
Package type: FCBGA1364
Memory 2 x DDR3L SO-DIMM 1333/1600 MHz up to 16GB
Support Non-ECC, unbuffered memory only
Chipset Intel® DH82QM87 PCH
Real Time Clock Chipset integrated RTC with onboard lithium battery
Watchdog Timer Generates a system reset with internal timer for 1min/s ~ 255min/s
Power Management Support ACPI 4.0 compliant
Serial ATA Interface 4 x serial ATA3 interface with 600MB/s transfer rate (Only for SATA3)
Support RAID 0, 1, 5, 10 and Intel Rapid Storage Technology
Display Interface Intel® 4th Generation Core mobile processor integrated HD Graphics 4600
1 x CRT (Onboard 2x8 pin-header)
1 x DVI (Onboard 20-bit connector)
1 x DisplayPort (Rear I/O Port)
1 x LVDS (Onboard 24-bit dual channel connector with +3.3/+5/+12V supply)
Audio Interface Realtek ALC888 HD Audio
LAN Interface 1 x Intel® I210-AT Gigabit LAN
1 x Intel® I217-LM Gigabit LAN (Support iAMT9.0)
GPIO Interface Onboard programmable 12 pin-header, 8-bit Digital I/O interface
Extended Interface PICMG 1.3 Half-size Interface Support 1 PCI-Express x16、1 x PCIe x4 or
4 x PCIe x1, 1 x Mini PCIe slot (Optional support mSATA (Only for SATA3))
Internal I/O Port 1 x RS232/422/485, 5 x RS232, 1 x SMBUS, 1 x GPIO, 4 x USB3.0, 2 x
USB2.0, 1 x IrDA,1 x CRT, 1 x DVI, 1 x LPC, 1 x LVDS, 1 x LCD inverter, 4 x
Serial ATA3 and 1 x Front panel Audio
External I/O Port 2 x LAN, 1 x DisplayPort and 1 x PS/2
Power Requirement Standard 24-pin ATX Power from Backplane
Dimension 168mm x 126mm
Temperature Operating within 0~60 centigrade
Storage within -20~85 centigrade
Ordering Code
Onboard CRT, LVDS, DVI, DisplayPort, SATA3, USB2.0, USB3.0, HD Audio ,LAN , SMBUS, LPC,
SIM, GPIO, IrDA, PS/2, PCIe mini card, mSATA.
HE-B7117L1 i7-4700EQ Mobile Processor,4 x PCIe x1
HE-B7117L4 i7-4700EQ Mobile Processor,1 x PCIe x4
HE-B7117P1 Celeron 2002E Mobile Processor,4 x PCIe x1
HE-B7117P4 Celeron 2002E Mobile Processor,1 x PCIe x4
The specifications may be different as the actual production.
For further product information please visit the website at HTUUhttp://www.commell.com.twUTUH

HE-B71 User’s Manual
-3-
1.3 <Mechanical Drawing>

HE-B71 User’s Manual
-4-
1.4 <Block Diagram>
4th Generation Intel® Core™ i7, Core™
i5, Core™ i3, Celeron Mobile Processor
2 x DDR3L SO-DIMM
1333/1600 MHz up to 16GB
1 x LVDS
1 x CRT
1 x DisplayPort
1 x DVI
4 x SATA3
(Not support SATA2)
ALC888 HD Audio
1 x Intel® I217-LM
1 x Intel® I210-AT
2 x External USB
2 x Internal USB
1 x PCI-E mini card
1 x LPC(TPM)
1 x RS232/422/485
1 x RS232 W83627DHG-P
1 x PS/2
1 x GPIO
1 x IrDA
1 x SMBUS
DH82QM87
FDI DMI
eDP
Channel A
SPI Flash
DDI
CRT PCI-E x1
USB3.0
2 x Internal USB
USB2.0
SATA3
PCI-E x1
LPC
SPI
1 x PCIe X16(Backplane)
PCI-E x16
1 x PCIe X4 or 4 x PCIe X1
(Backplane)
F81216D
5 x RS232

HE-B71 User’s Manual
-5-
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
CN_DIO
JRTC
JMSATA
CN_INV
CN_LPC
MINI_CARD
CN_AUDIO
JVLCD
CN_CRT
CN_LVDS
SATA3-4
SATA3-3
SATA3-2
SATA3-1
JFRNT
CN_IR
CN_SMBUS
CN_12V
CPUFAN
SYSFAN
PS/2 RJ45-1 RJ45-2 DisplayPort
JAT SO-DIMM1
CN_COM5/6
CN_COM3/4
CN_COM1/2
CN_USB3-2
CN_USB3-1
JCSEL1
JP1 JP2
JCSEL2
CN_DVI
CN_USB2
JVUSB

HE-B71 User’s Manual
-6-
2.2 <Jumper Location & Reference>
Jumper Function
JRTC CMOS Operating/Clear Setting
JVLCD Panel Voltage Setting
JAT Power mode select
JP1 Com1 Voltage Setting (For Pin 9)
JP2 Com2 Voltage Setting (For Pin 9)
JCSEL1
JCSEL2 CN_COM2 RS-232 RS422 RS485 Setting
CN_IR IrDA Setting
JVUSB USB Voltage Setting
JMSATA Mini Card mSATA Setting
JCSEL1
JP1 JP2
JCSEL2
JVLCD
JAT
JRTC
JMSATA
JVUSB

HE-B71 User’s Manual
-7-
2.3 <Connector Reference>
2.3.1 <Internal Connectors>
Connector Function Remark
CPU FCBGA 1364 CPU
SO-DIMM 1/2 204 -pin DDR3L SO-DIMM slot
SATA 1/2/3/4 7-pin Serial ATA3 connector
CN_12V DC 12V input connector
CN_AUDIO 5 x 2-pin audio connector
CN_DIO 6 x 2-pin digital I/O connector
CN_USB2 5 x 2-pin USB2.0 connector
CN_USB3-1/2 10 x 2-pin USB3.0 connector
CPUFAN 4-pin CPU cooler fan connector
SYSFAN 3-pin System cooler fan connector
CN_CRT 8 x 2-pin CRT connector
CN_DVI 10 x 2-pin DVI connector
CN_LVDS 20 x 2-pin LVDS connector
CN_INV 5-pin LCD inverter connector
CN_IR 5-pin IrDA connector
CN_COM1/2 19-pin RS232/485/422 for COM2
CN_COM3/4, 5/6 10 x 2-pin RS232
CN_LPC 6 x 2-pin LPC connector
CN_SMBUS 5-pin SMBUS connector
JFRNT 7 x 2-pin front panel switch/indicator
connector
Mini-PCIe 52-pin Mini-PCIe slot
2.3.2 <External Connectors>
Connector Function Remark
DisplayPort 20-pin DisplayPort connector
PS/2 PS/2 keyboard and mouse connector
RJ45-1/2 RJ45 LAN connector

HE-B71 User’s Manual
-8-
2.4 <Memory Setup>
The board provides 2 x 204-pin DDR3L SO-DIMM to support 1333/1600MHz up to
16GB. Support Non-ECC, unbuffered memory only.
SO-DIMM1
SO-DIMM2

HE-B71 User’s Manual
-9-
2.5 <CMOS & ATX Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting: 2-3
Jumper: JAT
Type: Onboard 3-pin jumper
JAT Mode
1-2 AT Mode
2-3 ATX Mode
Default setting:2-3
JAT
3
1
1 3
JRTC

HE-B71 User’s Manual
-10-
2.6 <Serial ATA Interface>
HE-B71 has Four Serial ATA 3 interfaces with RAID function, the transfer rate of the
Serial ATA 3 can be up to 600MB/s. Please go to HUhttp://www.serialata.org/UH for more
about Serial ATA technology information. The main features on Intel® QM87 PCH are
listed below:
1. Optimizing performance of the computer, the reaction speed and reliability
2. Intel® Smart Response Technology for fast access to frequently used files and
applications.
3. Superior performance and data protection: RAID technology
4. Dynamic StorageAccelerator release SSD performance power
5. Intel® Rapid Recover Technology provides fast data recovery
6. Lower power consumption and more excellent performance and flexibility
Based on Intel® PCH, it supports Intel®Rapid Storage Technology with combination
of RAID 0,1,5 and 10.
1. Supports for up to RAID volumes on a single, two-hard drive RAID array.
2. Supports for Serial ATAATAPI devices.
3. Supports for RAID spares and automatic rebuild.
4. Supports on RAID arrays, including NCQ and native hot plug.
For more information please visit Intel’s official website.
For more about the system setup for Serial ATA, please check the chapter of SATA
configuration.
SATA3-4
SATA3-3
SATA3-2
SATA3-1

HE-B71 User’s Manual
-11-
2.7 <Ethernet Interface>
The board integrates with one Intel® I210-AT Gigabit Ethernet & Intel® I217-LM
controllers, The Intel Gigabit Ethernet supports triple speed of 10/100/1000Base-T, with
IEEE802.3 compliance.
Onboard Intel® I217-LM GbE controller support Intel® AMT 9.0 feature on primary LAN
port. The BIOS is ready to support Intel® AMT 9.0 feature. The necessary prerequisite
is your CPU must support Intel® vPro technology, ex. HUi7-4700EQU
For further instruction about the Intel® AMT features and set up, please refer to the
iAMT Setting.pdf.
I210-AT I217-LM

HE-B71 User’s Manual
-12-
2.8 <Onboard Display Interface>
Based on Intel Haswell Bridge CPU with built-in HD Graphic, the board provide one
DisplayPort on the external I/O port, one 40-pin LVDS interface with 5-pin LCD backlight
inverter connector, one internal 16-pin CRT and 20-pin DVI connector interface .
The board provides triple display function with clone mode and extended desktop mode
for DVI, DisplayPort, CRT and LVDS.
2.8.1 <External Display>
Please connect your monitor which supports DisplayPort to connect onboard rear
I/O Port.
DisplayPort

HE-B71 User’s Manual
-13-
2.8.2 <Internal Display>
The board provides one 16-pin CRT, 20-pin DVI and 40-pin LVDS connector for 24-bit
single/dual channel panels, the LVDS supports up to 2048 x 1536 (UXGA) resolution,
with one LCD backlight inverter connector and one jumper for panel voltage setting.
Effective patterns of connection: 1-2 / 3-4 / 5-6
Warning: others cause damages
6 5
JVLCD
2 1
6 5
1 5
CN_INV
4 3
CN_LVDS
2
1
40
39
CN_CRT
1615
1 2
2
1
20
19
CN_DVI
1 2

HE-B71 User’s Manual
-14-
Connector: CN_CRT
Connector type: 16-pin header connector (pitch = 2.00mm)
Pin Number Assignment Pin Number Assignment
1 BR 2 BG
3 BB 4 NC
5 -CRTATCH 6 IOGND1
7 IOGND1 8 IOGND1
9 NC 10 -CRTATCH
11 NC 12 5VCDA
13 5HSYNC 14 5VSYNC
15 5VCLK 16 NC
Connector: CN_INV Connector:JVLCD
Type: 5-pin LVDS Power Header Type: 6-pin Power select Header
Pin Description
1 +12V
2 Reserved (Note)
3 GND
4 GND
5 ENABKL
Note: Reserved for MB internal test
Please treat it as NC.
Connector: CN_DVI
Connector type: onboard 20-pin connector
Pin Number Assignment Pin Number Assignment
1 +5V 2 N/C
3 HPD 4 Ground
5 TMDSTX0N 6 TMDSTX0P
7 Ground 8 TMDSTX1N
9 TMDSTX1P 10 Ground
11 TMDSTX2N 12 TMDSTX2P
13 Ground 14 Ground
15 TMDSTXCP 16 Ground
17 DVI_DA 18 DVI_SL
19 N/C 20 N/C
Pin Description
1-2 LCDVCC (3.3V)
3-4 LCDVCC (5V)
5-6 LCDVCC (12V)
Default: 1-2