Commell MP-6802 User manual

MP-6802
User’s Manual
Edition: 1.2
2008/10/08

MP-6802 User’s Manual
2
Copyright
The trademarks mentioned in the manual are legally registered to their respective
companies. Disclaimer
Notice
The written content provided with this product in the property of Taiwan Commate.
No part of this manual may be reproduced, copied, transmitted in any form or by
any means without prior written permission of Taiwan Commate.
Manual Classification
In order to assist in the use of this product, Taiwan Commate has categorized the
user manual. For detailed product information and specifications, please carefully
read the “Product User Manual”.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT

MP-6802 User’s Manual
3
Packing List:
Please check package component before you use our products.
☆ MP-6802 board
☆ Quick Installation Guide
☆ CD for manual and Demo drivers
☆ Cable Kit (Com Cable, Camera Cable)
Cable Kit:
Camera Cable X1 Com Cable X1

MP-6802 User’s Manual
4
Index
Chapter 1 <Introduction>...............................................................6
1.1 <General Information>........................................................................6
1.2 <Connector Location>.........................................................................7
1.21 <VIDEO Port> ...................................................................................7
1.3 <Driver Settimg> .................................................................................8
1.4 <Sample Program>...........................................................................12
1.41 <Preview> .......................................................................................13
1.42 <Video Motion>...............................................................................15
1.42 <Video Motion>...............................................................................16
Contact Information.........................................................................18

MP-6802 User’s Manual
5
(This Page is left for Blank)

MP-6802 User’s Manual
6
Chapter 1 <Introduction>
1.1 <General Information>
General Specification
Form Factor 1 ~ 4 video input Mini-PCI Capture Card
Video Decode Chipset One TW6802
Chipset Option Two 10bit video CMOS analog/ digit controller (ADCs)
Output Type NTSC (M), NTSC (4.43), PAL (B, D, G, H, I), PAL (M),
PAL (N), PAL (60) and SECAM (M)
Resolution
NTSC 720*480 , NTSC 640*480 , NTSC 320*240 ,
NTSC 160*120 / PAL 720*576 , PAL 384*288 , PAL
192*144
Internal I/O Cable 1 X VIDEO Cable
External I/O Cable 1 X 1~4 channel video input (BNC connector) Cable
Dimensions (W x L) 45nm x 60nm

MP-6802 User’s Manual
7
TW6802
1.2 <Connector Location>
1.21 <VIDEO Port>
Connector: CN_VIDEO
Type: 10-pin (5 x 2) connector
Pin NO. Signals Pin NO. Signals
1 VIDEO1 2 VIDEO2
3 VIDEO3 4 VIDEO4
5 GND 6 N/C
7 N/C 8 N/C
9 N/C 10 N/C
1 9
2 10

MP-6802 User’s Manual
Contact Information
8
1.3 <Driver Setting>
1. When completed the Hardware installation,
Please select the file location X:\Driver\MP-6802\SETUP”.
2. Please choose “Next”.

MP-6802 User’s Manual
9
3. Please choose “I accept the terms of the license agreement”
the press “Next”
4. Please fill in “User Name” and ”Company Name” then press
“Next”.

MP-6802 User’s Manual
Contact Information
10
5. Please choose “Install”.
6. Please TCC MP6802 D21 Capture and TCC6802A21 Audio
Capture both choose “Continue Anyway”.

MP-6802 User’s Manual
11
7. Please choose “Yes, I want to restart my computer now.’’
the press ‘’Finish’’
8. After driver install, please enter Device Manager, Driver
Install OK!!

MP-6802 User’s Manual
Contact Information
12
1.4 <Sample Program>
1. You can use COMMELL “TCCVDCApp” as your sample program to start
your application or as a test application for learning the functionality of
TCCDVC application and Dll library. User can find the execution application
on desktop window or find the source code and execution files in directory
C:\Profram Files\Commate\TCC6802\.
By running TCCDVCApp.exe
2. Please choose “Preview”.

MP-6802 User’s Manual
13
1.41 <Preview>
1. If you Setting 0 Device as 4 Channels. The program show will be as
following.

MP-6802 User’s Manual
Contact Information
14
Explanation of Sample program function
Device ID:
It is mean Techwell Chipset. One MP-6802
have 1 chipset, so, Then you can see
“Channel No Setup” Device: 0.
Channel ID:
Per chip can support 4 Video input, So, Then
you can select 0/1/2/3 for Video input.
But you’ll need to set “Channel No Setup” Ch
first.
Channel No Setup:
Please set number of video-In channels per
Device. Per device is allowing 4 channels.
Snapshot:
Catch the image on working channel.
Callback Test:
Catch the series image on working channel
Note:
Every channel is work separately, when you
want to change any setting, please stop all
channels which working.

MP-6802 User’s Manual
15
1.42 <Video Motion>
Please choose “Video Motion”, then you can see program interface as
following.
Enable:
If user “ check ” this box, it will enable video motion detection.
Action On Motion:
If this box is checked, the registered call back function will be executed, when
video motion is been detected. The call back function needs to be registered
during application initialization.
Indicator:
If this box is checked, it will show red spots as an motion indication, when the
video motion is been detected.
Threshold:
Select motion detection sensitivity level, the number smaller, the sensitivity
stronger.

MP-6802 User’s Manual
Contact Information
16
1.42 <Video Motion>
Please choose ‘’Video Recording’’, then you can see program interface as
following.
Video Compressor:
Enable video compressor link, the list box window will list all video compressor
components in the system. The user can select its own video compressor from the
list, if user has installed own video compressor.
Audio Capture Devices:
Enable audio capture device link, the list box window will list all audio capture
device in the system. The user can select one of audio device from the list.

MP-6802 User’s Manual
17
Audio Compressor:
Enable audio compressor link, the list box window will list all audio compressor
components in the system. The user can select its own audio compressor from the
list, if user has installed own audio compressor.
Start Capture Button:
Press the button, the test program will start to run, user will see real time video
on the preview window.
Record:
User check this, it will start to record the video.

MP-6802 User’s Manual
Contact Information
18
Contact Information
Any advice or comment about our products and service, or anything
we can help you please don’t hesitate to contact with us. We will do
our best to support you for your products, projects and business.
Taiwan Commate Computer Inc.
Address 8F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih
Taipei Hsien, Taiwan
TEL [phone]
FAX [phone]
Website TUhttp://www.commell.com.twUT
E-Mail TU[email protected]UT (General Information)
TU[email protected]UT (Technical Support)
Commell is the trademark of Taiwan Commate Com
p
uter INC.