Commell MP-954GPS User manual

MP-954GPS
User’s Manual
Edition 1.1
2009/10/23

MP-954GPS User Manual
1
Copyright
Copyright 2009 all rights reserved. This document is copyrighted and all rights are reserved.
The information in this document is subject to change without prior notice to make
improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from
the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT.

MP-954GPS User Manual
2
Packing List:
Hardware:
MP-954GPS Mini-PCI Card x1
Cable kit:
Com port cable (OALES-BKU2) x 2
CD Content::
Drivers & User’s Manual

MP-954GPS User Manual
3
1.0 <Product Specification>
General Specification
Form Factor Mini-PCI Type III B with 124-pin interface
Controller OXFORD OXuPCI954
Features Three 16C950 High performance UART channels
First channel for GPS
GPS Chipset SiRF Star III
GPS Features Tracking Sensitivity: -159dBm
Support NMEA 0183 and SiRF binary protocol
GPS Baud Rate 4,800 bps
1.1 <Connector Assignment>
RF
JRX
CN_COM
JTX

MP-954GPS User Manual
4
Connector: CN_COM
Type:20-pin (10x2 pitch=1.27x2.54mm) header
Pin Description Pin Description
1 DCD1- 2 RX1-
3 TX1- 4 DTR1-
5 GND 6 DSR1-
7 RTS1- 8 CTS1-
9 RI1 10 NC
11 DCD2- 12 RX2-
13 TX2- 14 DTR2-
15 GND 16 DSR2-
17 RTS2- 18 CTS2-
19 RI2 20 NC
Connector: JRX
Type:3-pin (3x1 pitch=2.0mm) header
Pin Description Pin Description Pin Description
1 VCC 2 RX 3 GND
Connector: JTX
Type:3-pin (3x1 pitch=2.0mm) header
Pin Description Pin Description Pin Description
1 VBAT 2 TX 3 GND
Connector: RF
Type:MCX connector
Pin Description Pin Description
1 RF receive 2~5 RF GND

MP-954GPS User Manual
5
1.3 <Driver Setting>
1. Copy the CD Driver folder to disk, Ex: C:\ , D:\ …
2. Please choose “Device Manager”
3. You can see other devices ”Other PCI Bridge Device”
and “PCI Serial Port”

MP-954GPS User Manual
6
4. Please choose “Other PCI Bridge Device” then press
Update Driver
5. Please choose ”NO, not this time“

MP-954GPS User Manual
7
6. Install software for ”Other PCI Bridge Device” Please
choose ”Install from a list or specific location”
7. Please choose “Search for the best driver in these location”
Check “Include this location in the search” then press
“Browse”

MP-954GPS User Manual
8
8. Please select the file location
”C:\Driver\MP-954GPS\windows\2000&XP&Vista\32bit”
9. Hardware Installation ”Serial Bus Adapter” Press
“Continue Anyway”

MP-954GPS User Manual
9
10. Completing the hardware update wizard
11. Please choose “PCI Serial Port” then press
Update Driver step same as 5. ~ 9.