Commell MP-954 User manual

MP-954
User’s Manual
Edition 1.0

Copyright
Copyright 2004 all rights reserved. This document is copyrighted and all rights are reserved.
The information in this document is subject to change without prior notice to make
improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from
the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT.

Packing List:
Hardware：
MP-954 Mini-PCI Card x1
Cable Kit：
CD Content：
Drivers & User’s Manual
1.0 <Product Specification>
General Specification
Form Factor Mini-PCI TYPE III B
Controller OXFORD OXmPCI954
Features Four 16C950 High performance UART channels
COM port Cable x 2

1.1 <Connector Location>
JCSEL1
CN_COM1/2 CN_COM3/4
JCSEL2
1.2 <Jumper Location & Reference>
2 12 19 1
2 6
JCSEL1 JCSEL2 CN_COM1/2/3/4
1 5 1 6 20 2
1.3 <Specifications>
Specifications
Form Factor Mini-PCI TYPEIIIB
Controller OXmPCI954-LQ-A
Accessories 2X10 com port cable X2

1.4<Jumper Setting>
JCSEL1 JCSEL2
RS-232
RS-485
RS-422
RS422/485 output form COM2
1.5 <Driver Setting>
1. Please choose Device Manager

2. Then you can see Other devices
3. Please choose Other PCI Bridge Device then press Reinstall Driver

4. Please choose NO，not this tme press Next
5 . Please choose Install from a list on specific location.

6 . Please select file location CDROM:\OXFORD\Ox954_V4_09
Press OK~
7.After Other PCI Bridge Device Driver setting please choose
PCI Serial Port then press mouse right key select properties

8. Please choose Reinstall Driver
9. Please choose NO，not this tme press Next

10. Please choose Install from a list on specific location press next
11. Please select file location CDROM:\OXFORD\Ox954_V4_09
Press OK

12. After driver install , please enter Device Manager then select
PCI Communications Port (COM5) press properties.
13. Please select Data rate

14. Please press Detect Crystal Frequency.
Then COM 6 7 8 all must press Detect Crystal Frequency.

1.6< Connector Assignment >
Connector: CN_COM1/2
Type: 20-pin (10 x 2) header
Pin Description Pin Description
1 DCD1- 2 RXD1-
3 TXD1- 4 DTR1-
5 Ground 6 DSR1-
7 RTS1- 8 CTS1-
9 RI1- 10 N/C
11 DCD2-/422TX-/485- 12 RXD2-/422TX+/485+
13 TXD2-/422RX+ 14 DTR2-/422RX-
15 Ground 16 DSR2-
17 RTS2- 18 CTS2-
19 RI2- 20 N/C
Connector: CN_COM3/4
Type: 20-pin (10 x 2) header
Pin Description Pin Description
1 DCD3- 2 RXD3-
3 TXD3- 4 DTR3-
5 Ground 6 DSR3-
7 RTS3- 8 CTS3-
9 RI3- 10 N/C
11 DCD4- 12 RXD4-
13 TXD4- 14 DTR4-
15 Ground 16 DSR4-
17 RTS4- 18 CTS4-
19 RI4- 20 N/C
20
1
19
2

Contact Information
Any advice or comment about our products and service, or anything
we can help you please don’t hesitate to contact with us. We will do
our best to support you for your products, projects and business.
Taiwan Commate Computer Inc.
Address 8F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih
Taipei Hsien, Taiwan
TEL [phone]
FAX [phone]
Website TUhttp://www.commell.com.twUT
E-Mail TUi[email protected]UT (General Information)
TU[email protected]UT (Technical Support)
Commell is the trademark of Taiwan commate computer INC