Commercial Electric 16508 User manual

THANK YOU
Item #1001 548 528
Model #16508
USE AND CARE GUIDE
LED FLEXIBLE TAPE LIGHT KIT

Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Commercial Electric!

Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................3
Three (3) Year Warranty...........................................................3
What is Covered.......................................................................3
What is Not Covered ................................................................3
Pre-Installation ..............................................................4
Planning Installation ................................................................4
Tools Required
FCC Statement............................................................
.........................................................................4
Hardware Included...................................................................4
Package Contents ....................................................................5
Installation ..............
.......
.......
.......
..............
......................................... 6
Operation ................................................
10
Maintenance................................................................ 12
Care and Cleaning ...................................................... 13
Troubleshooting.......................................................... 13
Service Parts ............................................................... 14
Safety Information
Always keep the user manual within reach while installing this LED
strip. Please read and understand the user manual to ensure proper
installation and use. Always pay attention to the technical data shown
on the product. We reserve the right to make technical changes.
ƶ
ƶ
Fitting and maintenance work may only be carried out by a
professional or an electrician in accordance with local safety
regulations.
All electrical connections must have good contact in order for
this product to have a long, useful life.
ƶThe LED chips of this LED strip can not be replaced.
ƶThis LED strip includes a linkable connector. Only link a maximum
of one LED strip. Do not link multiple strips together.
ƶPlease only use the LED driver which has been provided with this
LED strip.
ƶNever use the unit in a room where there is a danger of explosion
ƶDo not bend, crush or pull the cable. Protect from sharp
edges, oil and heat.
ƶDo not touch the LED strip or electrical connector directly
with hands.
ƶFor indoor and outdoor use.
ƶE
ƶThe LED strip and infrared receiver can be used outdoors, but they
are not submersible.
ƶElectrical waste should not be disposed of with household waste.
Please recycle where facilities exist.
nsure the connectors and endcap are securely fastened before
operating the strip.


DANGER:

WARNING:
IMPORTANT:

NOTICE:
2
Main power voltage and fuse must meet the
that the main cable is not live. Switch off the fuse.

CAUTION:

Do not submerge any part of this unit.
Do not cut the LED strip.
If using the adapter outdoors where it could be
exposed to rain, snow, or solid objects less than 1mm, to
protect against electric shock, install the adapter only in a
Class A GFCI receptacle that has a weatherproof enclosure
with the attachment plug cap inserted or removed.

WARNING:
The adapter is not for use with receptacles that
are weatherproof only when the receptacle is covered
(attachment plug cap not inserted and receptacle cover
closed).

WARNING:
Risk of electric shock. Mount the adapter at a
height greater than 30 cm / 11.8 in. from the ground surface.
Danger of eye damage! Never look directly at the
LED chips of this LED strip.
13

Warranty
WHAT ISNOT COVERED
for any
consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of
said product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
3
THREE (3 ) YEARS WARRANTY
This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be
defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the
instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse,
negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the
WHAT IS COVERED
MOC.TOPEDEMOH
.ecnatsissarehtrufrof3130-725-778-1tcatnocesaelP
The manufacturer warrants this xture to be free from defects in materials and workmanship for a period of three (3) years from date of purchase.

4
Pre-Installation
Read all instructions before installing.
To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.
:

Phillips
screwdriver
Pencil Brush Measuring
tape


NOTE: Hardware not shown to actual size.





AA Screw 22
BB Clip (type MH1) 10
CC End cap 1
Personal injury and damage to the LED strip
and/or mounting surface may result if the LED strip is
pulled from the surface. To reduce the likelihood of
injury or damage, mount only on a surface that is
structurally sound.
AA BB CC
NOTE
Part Description Quantity
HARDWARE INCLUDED
TOOLS REQUIRED (NOT INCLUDED)
PLANNING INSTALLATION

5
Pre-Installation (continued)




Description
A Adapter, infrared receiver and
connector (pre-assembled)
B
C Remote
1
1
1
A
B
C
Part Quantity
PACKAGE CONTENTS
MOC.TOPEDEMOH
.ecnatsissarehtrufrof3130-725-778-1tcatnocesaelP

6
Installation
 
1
ƶ

Remove any surface dust that is present on the area you will be applying the LED strip light to.


ƶ


NOTE
connect
connect connect connect
connect
2
Preparing the assembly location
and adapter by aligning at the arrows on the connector leading
strip. If you require two LED strips , then connect the second
connectors. Then connect the endcap to the end of the strip.
Make sure the connectors and endcap are securely
fastened all the way on both sides. Failing to securely connect
the connectors and endcap can permanently damage the strip.
Preparing the LED light strip
LED
A
B
Measure the desired space for the LED strip (B) installation to determine if you need to use one or two strips (only one strip is included
in this set, a second LED strip must be purchased separately).

MOC.TOPEDEMOH7
.ecnatsissarehtrufrof3130-725-778-1tcatnocesaelP
 

3
There are two installation options to choose from:
ƶ 3A Tape method: Remove the protective tape from the adhesive back of strip. On a clean and dry surface, place the LED strip (B)
into the desired position and press to ensure proper adhesion to the surface. This method is suitable for indoor applications and
can be used for temporary positioning outdoors in conjunction with method 3B.
ƶ
3B Clip and screw method: Place the LED strip (B) in the desired position. Use the clips (BB) and screws (AA) to secure the LED
strip (B) as shown. Clips (BB) should be placed in open areas of the strip. Do not cover the LED lights.

NOTE : An additional 18 feet strip may be linked to the original to create a 36 feet strip.
3A 3B



a.
b. c.
a. Use an angle greater or equal to 90 degrees when there is an LED chip on the corner
while placing the strip in a concave position. (Angle 90 )
b. Use an angle greater or equal to 60 degrees when there is no LED chip on the corner
while placing the strip in a concave position. (Angle 60 )
c. Use an angle greater or equal to 60 degrees when there is an LED chip on the corner
while placing the strip in a convex position. (Angle 60 ) In the convex position the
angle should not reach 90 degrees. See above diagram.
Note :
LED Chip
Correct lncorrect lncorrect
Angle 90 oAngle 60 o
Installation (continued)
 
B
AA
BB
Installing the LED strip

8
Installation (continued)
 
4


There are two installation options to choose from:
ƶ 4A: Remove the protective tape from the adhesive back of the infrared receiver (A), then place the infrared receiver (A) into position
and press to ensure a proper adhesion to the surface.
ƶ

4B: Use the two screws (AA) to install the infrared receiver into desired position.





CATION :A maximum of two 18 feet strips (36 feet total)
can be linked together using the same adapter.


60°
a.
Infrared receiver
Infrared receiver
Infrared receiver
b.
Correct
Incorrect
4A 4B

: Securely attach the end cap (CC) to the end of the LED
strip before operating.


:
NOTE
NOTE
b. The infrared receiver should face the remote (C).
3 m / 9.84 ft 3 m / 9.84 ft
5 m / 16.4 ft
Installing the infrared receiver
CC
AB

MOC.TOPEDEMOH9
.ecnatsissarehtrufrof3130-725-778-1tcatnocesaelP
Installation (continued)
 
5
ƶ

NOTE :












A
B
Infrared receiver
5a
5b
GFCI receptacle with
enclosure
GFCI receptacle without enclosure
5a:
.
30 cm / 11.8 in.
Connect the adapter to a power outlet.
Warning : If using the adapter
outdoors where it could be
exposed to rain, snow, or
solid objects less than 1mm,
to protect against electric
shock, install the adapter only
to a Class A GFCI receptacle
that has a weatherproof
enclosure with the attachment
plug cap inserted or removed.
Warning : The adapter is not for use with
receptacles that are weatherproof only
when the receptacle is covered
(the attachment plug cap is not inserted
and the receptacle cover is closed).
Warning : Risk of electric
shock. Mount the adapter
at a height greater than
30 cm / 11.8 in. from the
ground surface.
5b: The LED strip and infrared receiver can be used
outdoors but are not submersible.
Connecting to a power supply

10
 
1
NOTE: The remote (C) diagram below is not to scale.






2





NOTE: First understand the functions of the remote control keys before operating.

Increases brightness of the strip in stationary mode.
Increases the speed of the light in the motion mode.
RGB condition key, there are multiple color options
and motion modes.
(NOTE: there are 5 light intensity options and 5 speed
setting options)
ON/OFF
Warm white (solid white)
Decreases brightness of the strip in stationary mode.
Decreases the speed of the light in the motion mode.
(NOTE: there are 5 light intensity options and 5 speed
setting options)
Auto-cycle mode. It randomly selects different colors
and motion sequences
Eight color choices
Three-color sequence (in stationary or motion mode)
Seven-color sequence (in stationary or motion mode)
Sixteen-color sequence (in stationary or motion mode)
Trail to one direction. Choose your preferred
color or color sequence from the keys S, 3, 7 or 16
Trail to another direction. Choose your preferred
color or color sequence from the keys S, 3, 7 or 16
Horse race to one direction. Choose your preferred
color or color sequence from the keys S, 3, 7 or 16
Horse race to another direction. Choose your preferred
color or color sequence from the keys S, 3, 7 or 16
Spread to one direction. Choose your preferred
color or color sequence from the keys S, 3, 7 or 16
Spread to another direction. Choose your preferred
color or color sequence from the keys S, 3, 7 or 16
Queued color running to one direction. Choose your
preferred color or color sequence from the keys S, 3, 7 or 16
Queued color running to another direction. Choose your
preferred color or color sequence from the keys S, 3, 7 or 16
Continuous multicolor motion
Flash function. Choose your preferred color or color
sequence from the keys S, 3, 7 or 16
Jump function. Choose your preferred color or color
sequence from the keys S, 3, 7 or 16
Queued color running from two directions in turn
1 LED strip control key
2 LED strips control key
Operation
 
The remote appearance diagram
C
Functions of the remote




: The WW solid white setting does not support any of the motion features of the strip. There is a white setting under RGB that
is compatible with motion settings, and to reach it choose RGB, then choose S, and then press S repeatedly until reaching the white
setting (between yellow and red).



11
Operation (continued)
 
3

ƶ Turn the remote (C) on.
ƶ The simplest operation in RGB color mode is to make selections in this order: Choose the number of lit strips, choose the color,
choose the brightness, choose a motion, and then choose a speed.
ƶ

To control how many strips are lit: Press x1 for one strip and x2 for two strips. x1 works only in RGB color mode, not WW mode.
ƶTo set the color: Select RGB for color settings. Select WW for solid white setting.
ƶTo control brightness, the strip must be in a solid color state (no motion). For solid white, press WW. For color, press RGB, and
then press S, 3, 7, or 16. Then press the up or down arrow to control brightness.
ƶTo control the speed of motion, the strip must be in a motion mode. In RGB mode, press a motion mode (example: trail, horse race,
available for WW.






ƶAt any time, it is possible to adjust settings, but brightness must be in a solid color setting to adjust, and speed must be in a
motion setting to adjust.
NOTE: Please ensure the connectors and endcap are all securely fastened well.
Suggested operating method
NOTE
NOTE :
8 colors, whereas 3, 7, and 16 are a combination of colors. When only one strip is used on setting 16 then only 14 of 16 colors will be
present. 2 strips must be used to see all 16 colors.
MOC.TOPEDEMOH
.ecnatsissarehtrufrof3130-725-778-1tcatnocesaelP

12
 





Direct the remote (C) towards the infrared receiver (A) to manipulate
the colors of the strip.
Push
Open


The remote contains a CR2025 DC 3V button battery. If swallowed, it could
cause severe injury or death within 2 hours. Seek medical attention immediately.
WARNING :

NOTE : To replace the battery, unscrew the small screw on the back side of the remote (C), and refer to the diagram on the back side of the remote.
Maintenance
 
Safety instructions for the remote
C
ƶ
ƶ
ƶ
ƶ
ƶ
ƶ
ƶ
Always purchase the correct size and grade of battery that is most suitable for the intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed correctly with regard to polarity (+ and -).
Remove batteries from the equipment when it is not being used for an extended period of time.
Remove used batteries promptly.

13
Care and Cleaning

ƶ

ƶ Do not use any cleaners with chemicals, harsh abrasives, or solvents. Use only a dry soft cloth to dust or wipe carefully.
Troubleshooting
FCC Statement
The connector has faulty connections. Check the connectors connections.


This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION:
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The LED will not light.
Problem Possible Cause Solution
The LED is burned out.
The power is off.
The power cord is not plugged in.
Discontinue use of the lamp.
Ensure the power supply is turned on.
Ensure the power cord is plugged into the oulet.
Tre, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. Use a dry or slightly
dampened, clean cloth to wipe the e re.
The circuit breaker is turned off. Ensure the circuit breaker is in the “ON” position.
The fuse blows or a circuit
breaker trips when the light is
turned on.
A wire is exposed. Discontinue use of the lamp.
Unplug the unit from the wall.
Se 8 a.m. - 7 p.m., EST,
Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday.
rvice Team at 1-877-527-0313
MOC.TOPEDEMOH
.ecnatsissarehtrufrof3130-725-778-1tcatnocesaelP

41
Service Parts





AA Screw
Adapter, infrared receiver and
connector (pre-assembled)
BB Clip (type MH1) 10
B
CC End cap 1
C Remote



A1
1
1
AA BB CC
A
B
C
MODEL TYPE : 16508
Part Description Quantity
22

Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future use.

Artículo#1001 548 528
Modelo #16508
GUÍA DE USO Y CUIDADO
CINTA LUMINOSA FLEXIBLE LED

¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda,
llama al Servicio al Cliente de Commercial Electric,
de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes,
y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados.
1-877-527-0313
HOMEDEPOT.COM
crear productos de calidad diseñados para mejorar tu hogar. Visítanos por Internet para ver nuestra línea completa de productos disponibles para las
necesidades de mejoras de tu hogar. ¡Gracias por elegir Commercial Electric!
GRACIAS POR TU COMPRA

Índice
Índice..............................................................................2
Información de Seguridad ...........................................2
Garantía .........................................................................3
Tres (3) Años de Gara ntía .......................................................3
Incluido.....................................................................................3
No Incluido...............................................................................3
Pre-Instalación ..............................................................4
.....................................................4
Herramientas Necesarias
Declaración FCC...........................................................
........................................................4
Aparillage Incluido ...................................................................4
Contenido del Paquete ............................................................5
Instalación ..............
.......
.......
.......
....
......................................... 6
Funcionamiento ................................................
10
Mantenimiento
............................................................ 12
Cuidado y Limpieza .................................................... 13
Solución de Problemas.. . .............................................. 13
Piezas ..........................................................................
14
Información de Seguridad
Siempre mantenga estas instrucciones a mano cuando esté realizando
la instalación de la cinta luminosa LED. Por favor, lea y entienda estas
instrucciones para asegurar una instalación y uso apropiados. Siempre
preste atención a los datos técnicos que se presentan del producto.
Nosotros tenemos el derecho reservado para hacer cualquier cambio
técnico.
ƶ
ƶ
El montaje y el mantenimiento sólo pueden ser realizados por un
profesional o un electricista de acuerdo con las normas de
seguridad locales.
Todas las conecciones eléctricas deben estar en buen contacto, ya
que es vital para una vida útil y larga.
ƶLas pastillas LED de esta cinta luminosa no pueden reemplazarse.
ƶEsta cinta luminosa incluye connectores. Solamente conecte como
máximo una cinta luminosa adicional. No conecte varias cintas
luminosas juntas.
ƶPor favor, sólo utilice el conductor LED que se ha proporcionado con
esta cinta luminosa LED.
ƶNo utilice la unidad en una habitación donde hay un peligro de
ƶ
aceite y del calor.
ƶNo toque la cinta luminosa LED o el conector eléctrico directamente
con las manos.
ƶPara uso interior y exterior.
ƶAsegúrese que los conectores y la tapa del extremo esten seguros
y bien apretados antes de operar la cinta luminosa.
ƶLa cinta luminosa LED y el receptor infrarrojo se pueden usar en
ƶLos productos de desecho eléctricos no deben desecharse con la
basura doméstica. Por favor recicle donde existan instalaciones
de reciclage.


PELIGRO: Riesgo de lesiones oculares! Nunca mire
directamente a las pastillas LED de esta cinta luminosa.


2




13
ADVERTENCIA: Si usa un adaptador exterior que puede
estar expuesto a la luvia, nieve, o impacto de objetos sólidos
de menos de 1mm, como medio de proteccion contra corto
circuito, solo conecte el adaptador a un tomacorriente de
falla a tierra de Clase A RCCB que tenga una cubierta
protectora contra inclemencias de tiempo removible.
ADVERTENCIA: Riesgo de corto circuito. Monte el
adaptador a una altura mayor que 0,3 m (11,8 pulgadas) del
nivel del piso.
CUIDADO: No sumerja ninguna sección de esta cinta
luminosa bajo agua. No corte la cinta luminosa.
IMPORTANTE: El voltaje del circuito principal y el fusible,
Antes de comenzar el trabajo, asegúrese que el cable
principal no está activo. Desconecte el fusible.
NOTA
ADVERTENCIA: El adaptador no se debe usar en
tomacorrientes que sean solo protegidos contra
inclemencias del tiempo cuando el tomacorriente esta
cubierto (la tapa no esta adherida y el covertor de
tomacorriente esta cerrado).
exteriores pero no son sumergibles.

Comunícate con el Equipo de Servicio al Cliente al 1-877-527-0313 o visita www.HomeDepot.com.
3
NO CUBIERTO
El fabricante no garantiza y se exime especialmente de cualquier garantía, explícita o implícita, de la capacidad del producto de asumir una función
responsable de daños o pérdida directa o indirecta, incluidos cualquier costo de mano de obra o gastos relacionados con el reemplazo o reparación
de dicho producto.
Garantía
Tres (3) AÑOS DE GARANTÍA
El fabricante garantiza que esta lámpara no presentará defectos materiales o de fabricación por un período de tres (3) años a partir de la
fecha de compra. Esta garantía es válida sólo para el comprador original y sólo cubre productos en uso y funciones normales. Si se
descubre algún defecto en este producto, la única obligación y solución exclusiva del fabricante, a criterio del mismo, será reparar o
reemplazar el producto siempre y cuando el defecto no sea resultado de un mal uso, abuso, accidente, modicaciones, alteraciones,
negligencia o manejo indebido. Esta garantía no cubre ningún producto instalado, congurado o usado incorrectamente sin seguir las
instrucciones adjuntas al producto. Esta garantía no cubre fallas del producto a consecuencia de un accidente, mal uso, abuso, negligencia,
modicaciones o instalaciones defectuosas, o cualquier otra falla no relacionada con defectos materiales o de fabricación. Esta garantía no
se aplica al acabado de ninguna parte del producto, como el de la supercie, ni al deterioro por condiciones ambientales, ya que eso se
considera un desgaste normal.
CUBIERTO
MOC.TOPEDEMOH
Por favor llame al 1-877-527-0313 para asistencia adicional.

4
Pre-instalación
Lea todas las instrucciones antes de comenzar la instalación.

Destornillador Phillips o
de cabeza de estrías
Lápiz Brocha Cinta métrica







AA Tornillo 22
BB Presilla (tipo MH1) 10
CC Tapa de extremo 1
NOTA: Lesiones personales y daños a la cinta luminosa
Para reducir la probabilidad de lesión o daño, montar sólo
AA BB CC
PLANIFICACION DE LA INSTALACIÓN
HERRAMIENTAS NECESARIAS (NO PROVISTAS)
CONTENIDO DEL PAQUETE
NOTA: Partes no están a escala.
Pieza Descripción Cantidad

5
Pre-instalación (continuación)




A Adaptador, receptor infrarrojo y conector
(unidos en un conjunto)
B
C Control remoto
1
1
1
A
B
C
CONTENIDO DEL PAQUETE
Pieza Descripción Cantidad
MOC.TOPEDEMOH
Por favor llame al 1-877-527-0313 para asistencia adicional.