3
OPERATING INSTRUCTIONS
• Use clean water, do not use direct from river or lakes
• Do not operate shower without water at any time
• Ensure bucket is lled with sufcient water for
intended use
Step 1. Place pump in a bucket or connect to water
container. If using a bucket, ensure water pump is fully
submerged in water to prevent damage.
Step 2. Insert plug into suitable 12V DC outlet and push
switch on.
Step 3. Adjust ow of water as required using control
on shower head.
When using the camp shower, stretch the hose
vertically to allow any air bubbles to escape, which may
impede water ow.
IMPORTANT
Do not take the pump out of the bucket while in use
and ensure it is submerged in water before use.
TROUBLE SHOOTING
IF WATER DOES NOT FLOW
• Turn off pump
• Lift pump from bucket and hold shower head
vertical to draw water from shower
• Place pump in bucket and retry
IF PUMP DOES NOT RUN
• Check sufcient 12V DC power is available
• Check fuse in cigarette lighter tting
CARE INSTRUCTION
To clean the outside of the camp shower, use only a
damp cloth and mild dishwashing liquid.
SPECIFICATIONS
Part no. COMP25356
Water ow 6 L per minute*
Power supply 12V DC
Power cord length 5 m
Silicone hose length 2 m
Fuse 5 amp
Max Draw 3 amp*
*Average
OFF
ON
