COMPANION COMP824 User manual

OWNERS MANUAL
Part No. COMP824
OUTDOOR SHOWER STAND

2
The Companion Outdoor Shower Stand is ideal for the campsite, beach house or your next outdoor adventure.
Compact, lightweight and easy to assemble, it is designed for use with all Companion gas showers.
Can also be used with other portable water pumps and connects direct to standard garden hose.
FEATURES
• Adjustable shower head
• Inline water flow control
• Quick connect fitting for attachment to Companion Camp Showers
• Easy to operate and set up
• Height adjustable
• Compact and lightweight
• Storage bag
YOUR OUTDOOR SHOWER STAND INCLUDES:
• Shower head
• Quick connect fittings
• Flow control
• Storage bag
DESIGNED FOR USE WITH:
COMP812 - AquaCube Digital 10000052 - AquaHeat LithiumCOMP830LI - AquaCube Lithium
IMPORTANT: Read these instructions for use carefully. Familiarise yourself with the appliance.
Keep these instructions for future reference.

3
OUTDOOR SHOWER STAND OWNERS MANUAL
UNDERSTANDING YOUR APPLIANCE
HEIGHT ADJUSTMENT NUT SHOWER HEAD SECTION
SHOWER HEAD
WATER FLOW CONTROL
BASE
LOCKING NUT
LEG
WATER INLET FITTING
STORAGE
BAG

4
O-ring
1
2
3
4
ASSEMBLY
Shower stand consists of two parts – Base and Shower Head Section.
TO ASSEMBLE
Step 1. Locate a suitable solid and level surface.
Step 2. Fold out legs until they lock in position. Loosen lock nut and
slide water inlet upwards then retighten lock nut. (Fig.1)
Step 3. Check that the rubber “O” ring is located in the brass fitting
on the base of the shower head section before attaching to
the water flow control – take care not to cross thread the
connection. (Fig.2)
Step 4. Holding the shower head section firmly, position on the thread
of the flow control and rotate the brass nut in a clockwise
direction until tight – take care not to over tighten. (Fig.3)
Step 5. To extend shower head section, hold and loosen the height
adjusting nut in an anti-clockwise direction, slide the shower
head upwards until the desired height is reached then
retighten the nut in a clockwise direction. (Fig.4)

5
OUTDOOR SHOWER STAND OWNERS MANUAL
O-ring
1TO CONNECT
Step 1. Assemble Companion Camp Shower as per instructions
– do not turn ON.
Step 2. Unscrew shower head from the hose on the Companion
Camp Shower. (Fig.1)
Step 3. Ensure that the O-ring remains located in hose fitting
before attaching Quick Connect Fitting (included with
shower stand). (Fig.2A & 2B)
Step 4. Attach the Quick Connect Fitting to water inlet on the
shower stand. (Fig.3)
2B
2A
3

6
1TO OPERATE
NOTE: The shower head settings, Shower and Center, can only be used when
operating with a Companion Camp Shower.
The Companion Camp Shower will NOT provide suitable water flow if other settings
are selected. These may be suitable when connected directly to a tap hose.
Step 1. Ensure stand is assembled securely. Adjust to required height.
Step 2. Adjust shower head position. (Fig.1)
Step 3. Select required setting on shower head. SHOWER or CENTER setting
can only be used with Companoon Camp Shower. (Fig.2A & 2B)
Step 4. Turn Water Flow Control valve to ‘On’ position. (Fig.3)
Step 5. Operate Aquacube®Camp Shower as per normal.
Step 6. Once operating, the water flow can be turned On and Off using the
Water Flow Control valve on the shower stand. (Fig.3)
Step 7. To reignite the burner, turn the Water Flow Control to ‘ON’ and water
will flow from the shower head and the burner will reignite within 5 to
10 seconds.
NOTE: The Outdoor Shower Stand can also be used when directly
connected to a garden water tap or other water pumps.
IMPORTANT: Water remaining in the Companion Camp Shower while the
flow is stopped may become hot. When the flow is resumed the user
must check the temperature output to ensure that is it suitable and
not too hot.
ON OFF
2A
2B
3

7
OUTDOOR SHOWER STAND OWNERS MANUAL
SPECIFICATIONS
Part No: COMP824
Dimensions (assembled and
adjusted to full height): 230cm
Weight (assembled): 1kg
TECHNICAL DETAILS
• The Companion Outdoor Shower Stand is not designed to be used as a permanent shower. It is suitable for camping
purposes only.
NOTE: When used with an Companion Camp Shower, the water pressure and flow rate from the shower head is
subject to a number of factors including:
• Pump condition
• Battery condition
• DC voltage input

y
Companion®is a registered trademark of
Primus Australia Pty Ltd
Designed & Imported by:
Adventure Trading Australia Pty Ltd
71 Charles Ulm Place,
Eagle Farm, QLD 4009
AUSTRALIA
Made in China
WARRANTY - For details see www.companionleisure.com.au/warrant