Comtrend Corporation NL-3120 User manual

1
Press to "IN"
1
23
3
Turn this page over to set up your WiFi!
Locate the phone jack in your home.
Connect the GRAY data cable to the GRAY
DSL port on both the Gateway and the wall
phone jack.
Once you have established a connection to the
network, you will see the DSL 1 LED (on the
front of the gateway) turn solid green. Once
the Gateway is connected to the Internet, the
Internet LED will also be a solid green.
Self-Install Guide: A Comtrend NL-3120 Gateway
First plug the power adapter into an
electrical outlet.
Connect the other end of the power
adapterinto the power port on the
Gateway.
Laptop (or a PC, Streaming
Device, etc.)
Connect Your
New Gateway
2
Power up!
Phone Jack
Turn the Gateway On
Turn your Gateway on by pressing the On/Off button "IN". You will see the
Power LED turn solid green.
Optional: Connectup to
four wired Internet-
enabled devices.
Top of the Gateway: Electrical
Outlet

Self-Install Guide: A Comtrend NL-3120 Gateway
4Connect to the Gateway's WiFi
You can find the Gateways's network name and password on the bottom
of your Gateway.
To connect to your Gateway's WiFi network, first open the WiFi settings on
the device you want to connect. Select your Gateway's network name and
then enter your network password.
Need more help?
5You Are Done!
In this section you can add troubleshooting
information, your contact information, or any
additional technical support tools you would
like.