Conceptronic CM3PVR User manual

Copyright®2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 3
Conceptronic CM3PVR – DVD Playback & AVI Subtitle Instructions
for firmware ersion 038 and later ersions
A. DVD Playback Instructions
From firmware version 038, the CM3PVR supports DVD Playbac functionality.
To play DVD files from the CM3PVR, follow the instructions below:
1. Create a folder on the CM3PVR hard dis in the 'VIDEO' folder with the name of your DVD movie (for example:
'Mo ie1').
2. Copy the 'AUDIO_TS' and 'VIDEO_TS' including content from your DVD to the created folder (for example:
‘Mo ie1’) on the CM3PVR.
After copying, the structure should be:
- VIDEO
|-> Mo ie1
|-> AUDIO_TS (optional)
|-> VIDEO_TS (with all the DVD files inside)

Copyright®2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 2 of 3
3. Connect the CM3PVR to your TV and power on the CM3PVR.
4. Select 'Mo ies' in the main menu of the CM3PVR.
5. Select 'C:/' in the Movie browser.
6. Select 'VIDEO' in the Movie browser.
In the folder 'VIDEO', your movie should be listed (for example: as ‘Mo ie1’) with a DVD icon in front of it.
7. Select the movie folder and press the 'PLAY/PAUSE' button on your remote control.
The DVD playbac will now start.
Note: If you press 'ENTER' instead of 'PLAY/PAUSE', the CM3PVR will not play the DVD movie, but will open the
(movie) folder.
Remote Control functions during DVD Playback
Button Function(s)
Na igation buttons Navigate through the DVD Menu.
ENTER Confirm DVD Menu selection(s).
SUBTITLE Change or turn off the subtitle of the DVD.
AUDIO Change the audio trac of the DVD (when the DVD contains multiple audio trac s).
ANGLE Change the playbac angle of the DVD (when the DVD contains multiple angles).
FF Fast Forward
FR Fast Rewind
NEXT Next Chapter
PREVIOUS Previous Chapter
MENU Return to the DVD Menu.
TITLE Return to the DVD Menu.
STOP Stop the playbac of the DVD and return to the Movie browser.

Copyright®2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 3 of 3
B. AVI Subtitle Instructions
From firmware 038, the CM3PVR supports the following subtitle files:
•SRT
•SSA
•SUB
•SMI
To play AVI files with subtitles, you need to assign the same name to the subtitle file as the AVI file.
For example:
Movie name: My_Mo ie_With_Sub.AVI
Subtitle name: My_Mo ie_With_Sub.SRT
Select the AVI file you want to play and press the ‘ENTER’ or ‘PLAY/PAUSE’ button on the remote control. The AVI
file will start playing with the corresponding subtitle file loaded.
To disable/enable subtitles during playbac , press the ‘SUBTITLE’ button on the remote control.
The subtitle files are also listed in the browser menu when 'Mo ies' is selected from the main menu, so you can also
copy subtitles to other locations.