CONDTROL Vector 100 User manual

PROFESSIONAL
Руководство по эксплуатации
RU
User manual
EN
Bedienungsanleitung
DE
VECTOR
100

22
Vector 100 CONDTROL
SAFETY REGULATIONS 4
INTENDED USE 4
DELIVERY PACKAGE 5
TECHNICAL SPECIFICATIONS 5
PRODUCT DESCRIPTION 6
OPERATION 8
MEASUREMENTS 10
CALCULATIONS 13
MESSAGE CODES 26
CARE AND MAINTENANCE 27
UTILIZATION 27
WARRANTY 28
EN CONTENT
SICHERHEITSHINWEISE 29
BESTIMMUNGSGEMÄSSER GEBRAUCH 30
LIEFERUMFANG 30
TECHNISCHE SPEZIFIKATIONEN 30
GERÄTEBESCHREIBUNG 32
GERÄTEBEDIENUNG 34
MESSUNGEN 36
BERECHNUNGEN 39
FEHLERCODES 52
PFLEGE 53
ENTSORGUNG 53
GARANTIE 53
WARTUNG UND REPARATUR 54
DE INHALT

33
Vector 100 CONDTROL
УКАЗАНИЯ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ 55
НАЗНАЧЕНИЕ ПРИБОРА 56
КОМПЛЕКТАЦИЯ 56
ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ 56
ОПИСАНИЕ ПРИБОРА 57
РАБОТА С ПРИБОРОМ 59
ИЗМЕРЕНИЯ 61
ВЫЧИСЛЕНИЯ 64
КОДЫ СООБЩЕНИЙ 77
УХОД И ЭКСПЛУАТАЦИЯ 78
УТИЛИЗАЦИЯ 78
ГАРАНТИЙНЫЕ ОБЯЗАТЕЛЬСТВА 78
СЕРВИС И КОНСУЛЬТАЦИОННЫЕ УСЛУГИ 78
RU

User manual
LASER DISTANCE METER
44
EN
Vector 100 CONDTROL
Congratulations on your purchase of laser distance meter Vector 100 CONDTROL.
Safety instructions can be found in the end of this user manual and should be
carefully read before you use the product for the first time.
SAFETY REGULATIONS
The user manual should be read carefully before you use the product for the first
time. Unintended use of the product can be dangerous for human’s health and
cause serious injury. Keep this user manual. If the product is given to somebody
for temporary use, be sure to enclose user manual to it.
- Do not misuse the product
- Do not remove warning signs and protect them from abrasion, because they
contain information about safe operation of the product.
The device belongs to laser product class 2 in accordance with EN60825-1.
Laser radiation!
Do not stare into beam
Class 2 laser
<1 mW 635nm
EN60825-1: 2007-03
- Do not look into the laser beam or its reflection, with unprotected eye or
through an optical instrument. Do not point the laser beam at people or animals
without the need. You can dazzle them.
- To protect your eyes close them or look aside.
- It is prohibited to disassemble or repair the product yourself. Entrust product
repair to qualified personnel and use original spare parts only.
- Do not use the product in explosive environment, close to flammable materials.
- Avoid heating the batteries to avoid the risk of explosion and electrolyte
leakage. In case of liquid contact with skin, wash it immediately with soap and
water. In case of contact with eyes, flush with clean water during 10 minutes and
consult the doctor.
INTENDED USE
Laser distance meters Vector 100 is intended to measure distance, to calculate
area and volume of measured objects, perform calculations by tilt sensor
and Pythagoras’ Theorem, point to point measurements, store results of
measurement/calculation in memory and also transmit via Bluetooth. The
product is suitable for use at both indoor and outdoor building areas.

55
User manual
LASER DISTANCE METER
EN
Vector 100 CONDTROL
DELIVERY PACKAGE
The delivery package includes:
1. Laser distance meter – 1pc.
2. Carry pouch with a strap - 1 pc.
3. User manual - 1 pc.
5. USB charger - 1 pc.
TECHNICAL SPECIFICATIONS
Measuring range* 0,05–100 m
Measuring accuracy ** ± 1,5 mm
Smallest unit displayed 1 mm
Display backlight +
Reference point Front, rear, tripod, end-piece
Continuous measurement (tracking) +
Max./min. value +
Addition/subtraction +
Area/wall surface/volume +
Addition/subtraction of areas/volumes +
Calculation of horizontal distance by tilt sensor +
Calculations by Pythagoras’ theorem +
Point to point measurement +
Bluetooth +
Timer +
Digital vial +
Memory up to 30 values
Laser Class II, 635nm, <1 mW
Operating temperature –10 °С ... +50 °С
Storage temperature –20 °С ... +60 °С

User manual
LASER DISTANCE METER
66
EN
Vector 100 CONDTROL
PRODUCT DESCRIPTION
Display
Dust and water protection IP54
Power supply 3,7 V 850 mAh Li-Ion
rechargeable battery
Dimensions 119*46*28 mm
Weight 0,1 kg
* Use a reflective plate to increase the measurement range during daylight or if the
target has poor reflection properties.
** Accuracy can decrease in unfavorable conditions, such as intense sunshine or
when measurements are made against glossy or transparent surfaces, moving
objects, objects with rough surface.
In unfavorable conditions or when measured distance is over 100 m the maximum
permissible accuracy is calculated in the following way:
± (Y + 0,25хDх10-3) mm, where
D (mm) - measured distance
Y (mm) - permissible accuracy according to technical data.
1. Main line for displaying
measuring results
2. Additional lines for
displaying measuring results
3. Indication of tilt angle
4. Indication of the mode
5. Indication of Bluetooth
6. Indication of battery charge
level
7. Indication of reference point
8. Indication of measuring unit
2
7
8
1
3 5
6
4

77
User manual
LASER DISTANCE METER
EN
Vector 100 CONDTROL
1. Display
2. Keyboard
3. A hole for the strap
4. End-piece
5. Tripod thread 1/4’’
6. Type-C charging port
6
1
2
3
5
4

User manual
LASER DISTANCE METER
88
EN
Vector 100 CONDTROL
Functions of buttons
Button Short press Long press
Switch on the device
Switch on the laser beam
Single distance measurement
Continuous
measurement
(tracking)
Subtraction
Down (in menu of functions)
Set response time in timer (decrease value)
Flip through measuremens in memory
(backwards)
Addition
Up (in menu of functions)
Set response time in timer (increase value)
Flip through measurements in memory
(forward)
Enter the menu Change
reference point
Stop measurement/clear/exit the mode/exit
the menu
Switch off the
device
+
simultaneously
Select measuring unit
OPERATION
Battery charging
Charge level is shown on display. Charge the battery when symbol appears
on the display. Use USB charger delivered in the set only. It is not recommended
to use the product while charging. It takes approximately 3 hours to fully charge
the batteries.

99
User manual
LASER DISTANCE METER
EN
Vector 100 CONDTROL
Switch on/off the device
To switch on the device short press .
To switch off the device press and hold during 1 second.
Measuring unit
Short press and simultaneously.
Short press buttons and to select required measuring
unit – m/ft/in. Short press to confirm and return to single distance
measurement mode.
Reference point
Press and hold button during 1 second to select the reference
point. Appropriate indicator will appear on the display.
- Front - Tripod
- Rear (default) - End-piece
Menu
Short press button to enter
the menu of functions:
Short press buttons (down),
(up) to select the function. Selected
function will be framed in grey color.
Short press to confirm. Selected
function will be activated.
Short press to exit the menu.
- Front - Tripod
- Rear (default) - End-piece

User manual
LASER DISTANCE METER
1010
EN
Vector 100 CONDTROL
MEASUREMENTS
Single distance measurement
Short press The device will switch on.
Short press Laser beam will switch on.
Point the laser beam at the object of measurement.
Short press Make a single distance measurement.
- Measurement result
Short press Delete the last measurement result.

1111
User manual
LASER DISTANCE METER
EN
Vector 100 CONDTROL
Continuous distance measurement (Tracking)
Press and hold
during 2 seconds
Activate continuous measurement mode. The laser
beam is also activated. Symbol appears
on the display.
- maximal value
- minimal value
- current value
Short press
or
Stop continuous measurement.
The last measured values are shown on the display.
Short press Exit the mode.

User manual
LASER DISTANCE METER
1212
EN
Vector 100 CONDTROL
Addition/subtraction
Short press Turn on the laser beam. Aim the product at
measured object.
Short press Take the first measurement. Measuring result
appears in the main line.
Short press
for addition or
for subtraction
The symbol of addition or subtraction
will appear on the display.
Short press Turn on the laser beam. 1st measurement moves
to the 2nd line.
Short press Take the second measurement.
- 1st measurement
- 2nd measurement
- result of addition/subtraction
To do addition/subtraction of more than 2 measurements short press
and perform the above mentioned operations required number of times.
Short press Exit the mode.

1313
User manual
LASER DISTANCE METER
EN
Vector 100 CONDTROL
CALCULATIONS
Area
Short press
1 time. Enter menu of functions.
Short press / Select function “Area”
Short press Symbol will appear on the display.
Laser beam is on.
Short press Make the first measurement (length).
Short press Make the second measurement (width).
- length
- width
- area
Short press Exit the mode.

User manual
LASER DISTANCE METER
1414
EN
Vector 100 CONDTROL
Wall surface
Short press Enter menu of functions.
Short press / Select function “Wall surface”
Short press Symbol will appear on the display.
Laser beam is on.
Short press Make the first measurement (height).
Short press Make the second measurement (length 1).
Short press Make the third measurement (length 2).
- height
- length 1
- length 2
- wall surface
3rd, 4th, 5th etc. measurements can be done unlimited number of times. Each
new wall surface is added to previously calculated wall surface result.
If there is a window, door opening etc. in the room, it is possi-ble to exclude
them from wall surface area, or add area of another object to wall surface.

1515
User manual
LASER DISTANCE METER
EN
Vector 100 CONDTROL
Short press /
Activate addition or subtraction.
Symbol or will appear on the display.
Short press
2 times
Make 2 measurements to get calculation #2 (area of
object).
Short press Result of addition/subtraction of wall surface area
and area of object will appear on the screen.
- wall surface area
- area of object
- result of addition/subtraction
of wall surface area and area of object
To make one more addition/subtraction, short press buttons or
and repeat the procedure.
Short press Exit the mode.

User manual
LASER DISTANCE METER
1616
EN
Vector 100 CONDTROL
Volume
Short press Enter menu of functions.
Short press / Select function “Volume”
Short press Symbol will appear on the display.
Laser beam is on.
Short press Make the first measurement (length).
Short press Make the second measurement (width).
Short press Make the third measurement (height).
-length
-width
- height
-volume
Short press Exit the mode.

1717
User manual
LASER DISTANCE METER
EN
Vector 100 CONDTROL
Addition/subtraction of areas/volumes
Short press
1 time Enter menu of functions.
Short press / Select function “Area” or “Volume”
Short press Symbol or will appear on the display.
Laser beam is on.
Short press Make required number of measurements to get
calculation #1.
-length 1
-length 2
- length 3
-calculation #1
Short press /
Activate addition or subtraction.
Symbol or will appear on the display.
Short press Make required number of measurements to get
calculation #2.
Short press Result of addition/subtraction of calculations #1
and #2 will appear on the display.

User manual
LASER DISTANCE METER
1818
EN
Vector 100 CONDTROL
- calculation #1
- calculation #2
- result of addition/subtraction of calculations
#1 and #2
To make one more addition/subtraction, short press buttons or
and repeat the procedure.

1919
User manual
LASER DISTANCE METER
EN
Vector 100 CONDTROL
Calculation of horizontal distance by tilt sensor
Short press Enter menu of functions.
Short press / Select function “Calculation
of horizontal distance by tilt sensor”
Short press Symbol will appear on display. Laser beam
is on.
Short press Take first measurement (hypotenuse).
- tilt angle value (measured)
- hypotenuse (measured)
- cathetus/vertical distance (calculated)
- cathetus/horizontal distance (calculated)
Short press Exit the mode.

User manual
LASER DISTANCE METER
2020
EN
Vector 100 CONDTROL
Point to point measurement
Short press Enter menu of functions.
Short press / Select function “Point to point”
Short press Symbol will appear on display.
Laser beam is on.
Short press Make the first measurement (distance to point A)
Short press Make the second measurement (distance to
point B)
– distance to point A (measured)
– distance to point B (measured)
– distance between points A and B (calculated)
Short press Exit the mode.