CONDTROL GFX 200 User manual

GFX 200/GFX 300/GFX 360/GFX 360
3
EN CONTENTS
1. SAFETY REGULATIONS 4
2. PRODUCT DESCRIPTION 5
3. TECHNICAL SPECIFICATIONS 8
4. DELIVERY PACKAGE 9
5. BEFORE START OPERATION 9
6. OPERATION 10
7. ACCURACY CHECK 12
8. CARE AND MAINTENANCE 19
9. UTILIZATION 20
10. WARRANTY 21
RU СОДЕРЖАНИЕ
                         

 

 





              

4 5
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
Congratulations on your purchase of laser levels GFX 200/GFX 300/
GFX 360/GFX 3603CONDTROL.
Safety instructions can be found in the end of this user manual and
should be carefully read before you use the device for the first time.
1. SAFETY REGULATIONS
The user manual should be read carefully before you use the device
for the first time. Unintended use of the device can be dangerous for
human’s health and cause serious injury. Keep this user manual. If the
device is given to somebody for temporary use, be sure to enclose
user manual to it.
- Do not misuse the device.
- Do not remove warning signs and protect them from abrasion,
because they contain information about safe operation of the device.
- Do not look into the laser beam or its reflection, with unprotected
eye or through an optical instrument. Do not point the laser beam at
people or animals without the need. You can dazzle them.
- To protect your eyes close them or look aside.
-Always install the product in such a way, so that the laser line is below
or above the eye level.
- Do not let unauthorized people enter the zone of product operation.
- Store the product beyond reach of children and unauthorized
people.
- It is prohibited to disassemble or repair the product yourself. Entrust
product repair to qualified personnel and use original spare parts
only.
Laser radiation!
Do not stare into beam
Class 2 laser
<1 mW 520 nm
EN60825-1:2014
2. PRODUCT DESCRIPTION
Laser levels GFX 200/GFX 300/GFX 360/GFX 3603 CONDTROL are
designed for projecting and controlling of vertical and horizontal
planes and lines.
The laser levels have 2 operating modes:
- Locked compensator, to project inclined planes and lines;
- Automatic leveling, which allows to automatically compensate
irregularities within self-leveling range of ±5°.
Pulse mode allows to increase working range of the laser level by using
the laser receiver or to work when laser is hard to define in bright
lighting conditions.
These laser levels are suitable for use at both indoor and outdoor
building areas.
- Do not use the product in explosive environment, close to flammable
materials.
- Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.

6 7
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
1 – Laser beam exit windows
2 – Control panel
3 – Battery door
4 – Tripod thread 1/4’’
5 – Switch bar
6 – Magnets for fixing on vertical structures
7 – Hole for fixing by the cable tie
8 – Hole for fixing on a screw/nail
Control panel
1 – Switch on/off the laser lines
2 – Switch on off the pulse mode
3 – Power indicator
4 – Locked mode indicator
5 – Pulse mode indicator
1
5
1
1
1
11
1
4
3
6
6
8
1
3 5
2
4
2
7

8 9
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
3. TECHNICAL SPECIFICATIONS
GFX200 GFX300 GFX360 GFX3603
Working range/
with receiver* 20/40m
Leveling accuracy ±0.3 mm/m
Self-leveling range ± 5°
Operating
temperature -10°C ... +50°C
Storage temperature 
Relative humidity 90%
Dust and water
protection rate IP54
Tripod thread 1/4’’
Laser Class II 520nm < 1 mW
Battery 3.7V 3000 mAh Li-ion rechargeable
Dimensions   
Weight 0.28kg 0.29kg 0.35kg
* The working range may differ from the declared depending on the
lighting conditions.
4. DELIVERY PACKAGE
Laser level – 1 pc.
Cable tie – 1 pc.
Pouch – 1 pc.
Battery (3.7V 3000 mAh Li-ion) – 1 pc.
Charging cable – 1 pc.
User manual – 1 pc.
5. BEFORE START OPERATION
5.1. Power supply
The device is powered via a 3.7V 3000 mAh Li-ion rechargeable
battery included in the delivery package.
5.2. Install/charge the Li-ion battery
Install the battery in the battery compartment, observing the polarity.
Use only the battery included in the delivery package.
If the power indicator on the control panel becomes red, charge the
battery.
The battery should be charged in the following way:
1) Remove the battery from the device.
2) The battery charging time depends on the current of the adapter
used:
#Current Charging time
1500 mA 6 hours
21000 mA 3 hours
32A 1.5 hours
Note: It is forbidden to use adapters with an output voltage of more
than 5V! It may lead to damage of the battery.
4) As soon as the charging time runs out, disconnect the charger and
put the battery in the battery compartment.

10 11
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
6. OPERATION
Install the device on a firm and stable surface or tripod.
Move the switch bar to select the required operation mode:
1) Unlocked mode (self-leveling)
Move the switch bar to position ON.
The laser level will switch on.
Short press to switch on required laser lines.
Short press to switch on/off the pulse mode.
Move the switch bar to position OFF to switch off the laser level.
2) Locked mode (projection of inclined planes)
The switch bar is in position OFF.
Press and hold during 3 seconds to switch on the laser.
Long press to switch on required laser lines.
After all possible combinations of lines are switched on, the next long
press will switch off the laser level.
Press and hold during 3 seconds to switch on/off the pulse
mode.
Note: To increase the operating time and avoid the risk of
unintentional blinding switch on the laser only before start operation.
If operated near objects or airflows different from the environment
temperature the laser line may tremble due to heterogeneity of the
atmosphere. The longer the distance, the more trembling can be
observed.
The width of the laser line increases with the increasing of the
operating distance. The marking should be made along the axis of the
laser line. For maximum accuracy, use the middle portion of the laser
line.
It should be noted that the shape of the laser line on the object’s
surface (e.g. walls, ceilings) depends on the curvature and slope of the
surface relative to the laser plane.

12 13
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
7. ACCURACY CHECK
7.1. Check of horizontal line
GFX200/GFX300
Check of horizontal line is carried out by using 2 walls located opposite
each other at a 5m distance.
1. Put the laser level as close as possible to the wall so that laser
emitters are located opposite the wall.
2. Move the switch bar to position ON and switch on the horizontal line.
Mark location of horizontal line on the wall as A1.
3.Rotate the laser level by 180° and mark location of horizontal line on
the opposite wall as B1.
4. Turn the laser level to the right. Measure vertical deviation of the
horizontal line from the point B1. If deviation exceeds 1.5 mm, –
please contact the service center.
5. Repeat actions described in point 4 by turning the laser level to the
left.
5m
max 1.5mm

14 15
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
GFX360/GFX3603
Check of horizontal line is carried out by using 2 walls located opposite
each other at a 5m distance.
1. Put the laser level to one of the walls as close as possible. Move
the switch bar to position ON and switch on both vertical and
horizontal planes. Rotate the laser level so that laser emitters are
located opposite to the near wall and laser lines cross each other.

crossing on another wall as B1.
6. Move the laser level closer to the opposite wall. Mark location of
horizontal line on the wall as B2.
7. Rotate the laser level by 180° and mark location of horizontal line
on the opposite wall as A2.
            
accordingly. If the difference between values dA, dB exceeds 3 mm –
please contact the service center.
5m
5m

16 17
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
2. Rotate the laser level by 90°, measure deviation of a laser line from
           
center.
3. Repeat actions described in point 2 twice, rotating the laser level
in one direction.
4. Install the laser level closer to the opposite wall. Mark location of

vertical).
5. Rotate the laser level by 180°and mark location of laser lines
crossing on the opposite wall as A2 (points A1, A2 must be located at
the same vertical).
           
accordingly. If difference between values dA, dB exceeds 3 mm –
please contact the service center.

18 19
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
7.2. Check of vertical line
Use a plumb bob as a reference of a vertical line. Put the laser level at
1.5m distance from the plumb bob.
1. Move the switch bar on position ON, and align vertical laser line
with the low point of plumb bob.
2. If deviation between the laser line and the plumb line exceeds 0,3
mm per 1m of plumb bob length (for a 2.5m plumb bob deviation
shouldn’t exceed 0.7 mm) – please contact the service center.
8. CARE AND MAINTENANCE
Attention! This laser level is a precise optic-mechanical device and
requires careful handling. Before starting work, as well as after
mechanical influences (falling, bumps), check the accuracy of the
device.
Observation of the following recommendations will extend the life
of the device:
- Store the device, spare parts and accessories away from children and
unauthorized people.
- Transport the device with locked compensator only.
- Protect the device from bumps, falls, and excessive vibration; do
not let moisture, construction dust and foreign objects get inside the
device.
- In case moisture gets inside the device, first of all, remove the
batteries and then contact the service center.
- Do not store or use the device for a long time in high humidity
conditions.
- Check the accuracy of the device occasionally (check the paragraph
«Accuracy check»).
- Clean the device with a soft wet cloth. Do not use harsh chemicals,
cleaning solvents or cleaning agents.
- Wipe the laser aperture with a soft lint-free cloth and isopropyl
alcohol.
- Remove the Li-ion battery or alkaline batteries from the device
before connecting the charger, otherwise the device may fail.
1.5m

20 21
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
Failure to observe the following rules may lead to electrolyte
leakage from the batteries and failure of the device:
- Remove the battery from the device, if it’s not used for a long time.
- Do not leave discharged battery in the device.
- Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.
9. UTILIZATION
Expired tools, accessories and package should be passed for waste
recycle. Please send the device to the following address for proper
recycle:
CONDTROL GmbH
Wasserburger Strasse 9
84427 Sankt Wolfgang
Germany
Do not throw the device in municipal waste!

and their components must be collected separately and submitted to
environmentally friendly recycle of wastes.
10. WARRANTY
All CONDTROL GmbH devices go through post-production control and
are governed by the following warranty terms. The buyer’s right to
claim about defects and general provisions of the current legislation
do not expire.
1) CONDTROL GmbH agrees to eliminate all defects in the device,
discovered during the warranty period, that represent the defect in
material or workmanship in full volume and at its own expense.
2) The warranty period is 24 months and starts from the date of
purchase by the end customer (see the original supporting document).
3) The warranty doesn’t cover defects resulting from wear and tear or
improper use, malfunction of the device caused by failure to observe
the instructions of this user manual, untimely maintenance and
service and insufficient care, the use of non-original accessories and
spare parts. Modifications in design of the device relieve the seller
from responsibility for warranty works. The warranty does not cover
cosmetic damage, that doesn’t hinder normal operation of the device.
4) CONDTROL GmbH reserves the right to decide on replacement or
repair of the device.
5) Other claims not mentioned above, are not covered by the warranty.
6) After holding warranty works by CONDTROL GmbH warranty period
is not renewed or extended.
7) CONDTROL GmbH is not liable for loss of profit or inconvenience
associated with a defect of the device, the rental cost of alternative
equipment for the period of repair.
This warranty applies to German law except provision of the United
Nations Convention on contracts for the international sale of goods
(CISG).
In warranty case please return the device to retail seller or send it with
defect description to the following address:
CONDTROL GmbH
Wasserburger Strasse 9
84427 Sankt Wolfgang
Germany

22 23
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
ЛАЗЕРНЫЙ
НИВЕЛИР ЛАЗЕРНЫЙ НИВЕЛИР

300/GFX 360/GFX 3603CONDTROL.
    
     
      

1. УКАЗАНИЯ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
Внимание!     

       
     


         
      

           
      
        

     

       



       




IEC 60825-1: 2007-03
2. ОПИСАНИЕ ПРИБОРА
        3CONDTROL
      


     



     

       



     
    

      

       

       


Laser radiation!
Do not stare into beam
Class 2 laser
<1 mW 520 nm
EN60825-1:2014

24 25
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
ЛАЗЕРНЫЙ
НИВЕЛИР ЛАЗЕРНЫЙ НИВЕЛИР
Внешний вид прибора
1
5
1
1
1
11
1
4
3








Панель управления





1
3 5
2
4
6
6
8
2
7

26 27
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
ЛАЗЕРНЫЙ
НИВЕЛИР ЛАЗЕРНЫЙ НИВЕЛИР
3. ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
GFX200 GFX300 GFX360 GFX3603

 

 

 ± 5°

 -10°C ... +50°C

 

 90%

 IP54



1/4’’
 
 


   
   
* Рабочий диапазон может отличаться от заявленного в
зависимости от условий освещения.
4. КОМПЛЕКТАЦИЯ






5. ПОДГОТОВКА К РАБОТЕ С ПРИБОРОМ
5.1. Питание прибора
     

5.2. Установка/зарядка литий-ионного аккумулятора
     








       

  
1 
2 
32A 
Внимание:
         


28 29
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
ЛАЗЕРНЫЙ
НИВЕЛИР ЛАЗЕРНЫЙ НИВЕЛИР
      

6. РАБОТА С ПРИБОРОМ
      


1) Режим автоматической компенсации
     ON 



   

      
OFF.
2) Режим построения наклонных плоскостей
OFF.


         
   





Внимание:       
    
    

      
      
    

     
 
     

       
        
       


30 31
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
ЛАЗЕРНЫЙ
НИВЕЛИР ЛАЗЕРНЫЙ НИВЕЛИР
7. ПРОВЕРКА ТОЧНОСТИ
7.1. Проверка горизонтали
GFX200/GFX300


        

    
      

         

5м

       


max 1.5мм

32 33
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
ЛАЗЕРНЫЙ
НИВЕЛИР ЛАЗЕРНЫЙ НИВЕЛИР
      


        

        

          
      

5м
GFX360/GFX3603


        
    
    
       



5м

34 35
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
ЛАЗЕРНЫЙ
НИВЕЛИР ЛАЗЕРНЫЙ НИВЕЛИР
         
         

          

      
        

        
        

          
       


36 37
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
ЛАЗЕРНЫЙ
НИВЕЛИР ЛАЗЕРНЫЙ НИВЕЛИР
7.2. Проверка вертикали
      

    
      

       



1,5м
8. УХОД И ЭКСПЛУАТАЦИЯ
Внимание!    
      


Соблюдение следующих рекомендаций продлит срок службы
прибора:
         

     

       
      

          

         

       

       





38 39
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
руководство пользователя
RU
GFX 200/GFX 300/GFX 360/GFX 360
3
ЛАЗЕРНЫЙ
НИВЕЛИР ЛАЗЕРНЫЙ НИВЕЛИР
Несоблюдение следующих правил может привести к вытеканию
электролита из элементов питания и порче прибора:



       

       


9. ГАРАНТИЙНЫЕ ОБЯЗАТЕЛЬСТВА



      


     
     

     


     


10. УТИЛИЗАЦИЯ
     
     





Только для стран-членов ЕС:

     
       
      
     

     
     

       
     

11. СЕРВИС И КОНСУЛЬТАЦИОННЫЕ УСЛУГИ
       
www.condtrol.ru.