Connection Tryst Booth User manual

www.connection.uk.com
Tryst Booth assembly instructions
Instructions
1 Remove packing glides and place
the two units together.
2 Add booth support rail, leg frame
and legs.
3 Repeat making a left & right
4 Add screens to each sofa &
secure internally
5 Place the sofa, units facing
each other
6 Add final screen using the
adjustable key to close any gaps.
7 Finally, secure the central screen
to the booth support rail from
underneath.
Your Tryst module will be supplied unassembled,
with all the fixings supplied for the complete
assembly. This allows for the units to be
transported through a building to the assembly
area in a safe and easy manner. In this ‘knocked
down’ format, each piece is of a suitable size to
be transported in a standard lift.
The number of pieces per unit supplied will be
dependant on the product ordered, but will
consist of: screens, seating units, table tops, leg
frame and legs.
1 2
3
4 5/6 6/7
Glides
Key
fixing
holes
Booth support rail
Glides

www.connection.uk.com
Attaching the leg frame to the body:
Completing the unit
2 Remove packing glides.
3 Offer the Screen and Seating
unit together, ensuring the
positioning fixtures are aligned.
4 To secure the screens to the
seating units, use the 10x
M8-50mm bolts. This is done
through the unzipped under
cloth. Please re-zip the under
cloth after this stage.
5 Place the leg frame on the
underside of the unit and secure
with the 16 x M8 button head
bolts.
6 Rotate the unit so that it is
upright. The same method is
used on the high backs.
*Please note that the unit shown
includes the optional power unit
2 3
Frame assembly
Metal and wood
Metal
1a Insert the leg into the box section
frame, one per corner and
rotate the bolts anti-clockwise to
tighten the legs to the frame.
Wood
1b Place the leg at the end of the
box section frame and secure
with 3 bolts to the frame.
Complete both ends of the
frame.
1a
1b
1a
1b
3 4
5 6*
Your Tryst module will be supplied unassembled, with all the fixings supplied for the complete assembly.
This allows for the units to be transported through a building to the assembly area in a safe and easy
manner. In this ‘knocked down’ format, each piece is of a suitable size to be transported in a standard lift.
The number of pieces per unit supplied will be dependant on the product ordered, but will consist of:
screens, seating units, table tops, leg frame and legs.
Tryst Sofa assembly instructions