Convaid Cruiser CX10T User manual

ENGLISH
User’s Guide
Cruiser
Fixed-Tilt Wheelchair
SAVE THIS BOOK FOR FUTURE REFERENCE
READ INSTRUCTION BEFORE USING

i
CONVAID USER’S GUIDE
Customer Service Support
Toll Free: 1-844-US Mobility (844-876-6245)
Phone: [phone]
Fax: [phone]
Email: [email protected]
International Email: [email protected]
Website: www.convaid.com
Technical assistance or repair information hours are:
Monday-Friday, 6 a.m. to 4:30 p.m. PST
Notice:
The information contained in this document is subject to change without notice.
No part of this document may be photocopied, reproduced, transmitted, transcribed,
stored in a retrieval system or translated to another language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual
or otherwise without the prior written consent of Convaid.
Use only Convaid accessories and parts on Convaid products. Convaid parts are not
interchangeable with other manufacturers’ products. Replace any worn parts
immediately.
© Copyright 2017 by Convaid. All rights reserved.
Before Calling:
Please ll in the following. Customer Service will be able to help you
more quickly if the information indicated below is readily available.
Serial number of chair:_______________________________
Model of chair:_____________________________________
Date purchased:____________________________________
Dealer name:_______________________________________

ii
CONVAID USER’S GUIDE
Table of Contents
Product
Overview
 DenitionofSymbols……………………………………………………..  1
 CruiserOverview…………………………………………………………..  3
 Specications……………………………………………………………....  4
 CruiserProductLine………………………………………………………  5
 Warnings…………………………………………………………………….  6
SettingUp
 Contentsinthebox………………………………………………………  9
 HowToRemoveChairfrombox……………………………………..  9
 PreparingtheChairforUse……………………………………………  9
 UnfoldingtheChair………………………………………………………  10
 FoldingtheChair…………………………………………………………  11
 Lifting/CarryingtheChair……………………………............................  12
FittingGuide
 SeatBackHeight…………………………………………………...........  13
 SeatWidth………………...………………………………………………..  13
 SeatDepth………………………………………………………………….  14
 SeatDepthTubesReplacement……………………………………......  14
 AttachingSupportStrapforSeatExtensionTubes………..............  15
 TwoPieceSeat………………………………………………………………  15
Wheels
 QuickReleaseWheels………………………….....................................  16
 Anti-ShimmyAdjustment……………………………………………......  16
 LockingandUnlocking…………………………………………………..  17
 AttendantHandBrake…………………………………………………....  18
Operating 
 Three-PointPositioningBelt…………………………………………….  19
 DepthAdjustableCrotchStrap………………………………………....  20
 H-HarnesswithPaddedCovers…………………………………………  20
 SeatBackAngleAdjustment………………………………………….....  21
 FootplateHeightAdjustment…………………………………………….  23
 AngleAdjustableFootplates………………………………………….....  24
 FootPositioners……………………………………………………………  25
 FootplateSecurementStrap………………………………………….....  25
 FootplateDepthAdjustment………………………………………….....  25
 CasterLocks………………………………………………………………..  26
 CalfPanel……………………………………………………………………  26
 AnatomicBackSupportFrame……………………………………….....  26

iii
CONVAID USER’S GUIDE
Accessories&Options
 Swing-AwayLateralSupportwithScoliosisStrap…………............  27
 LateralTrunkSupport…………………………………………………….  28
 FullTorsoSwing-AwaySupportVest……………………………........  30
 LateralThighSupport(Adductor)………………………………….......  30
 MedialThighSupport(Abductor)………………………………….......  31
 PaddedHeadwings………………………………………………………..  31
 HeadrestExtension……………………………………………………….  32
 Occi-Headwing……………………………………………………………..  32
 AdjustingthePelvicBeltStrap………………………………………....  34
 AdjustingtheCrotchStrap……………………………………………...  34
 SeatCushions……………………………………………………………..  35
 UpperExtremitySupportSurface(Tray)………………………..........  37
 SaddleBags……………………………………………………………......  38
 UnderSeatStorageBasket……………………………………………...  38
 HeadrestCover(Canopy)………………………………………………..  39
 Heavy-DutyReinforcedUpholstery………………………………........  40
 ReducerSeatInsert…………………………………………………….....  40
 RearAnti-TipTubes…………………………………………………….....  40
 UtilityBag………………………………………………………………......  41
TransitModels
 TransitModels……………………………………………………………..  42
 TransportationModeInstructions……………………………………...  43
 RecommendedClearZonesinVehicle……………………………......  45
 ProvidingClearSpace&Padding……………………………………...  45
 CruiserTransitAnchorInstallation…………………………………….  46
 ProperUseofEquipment………………………………………………..  48
 RestrainingtheWheelchairOccupant……………………………......  50
 UsingPosturalBelts&Supports……………………………………....  52
 Trays&OtherWheelchairComponents……………………………....  52
 WTORSManufacturers………………………………………………......  53
Miscellaneous
 FabricRemoval…………………………………………………………....  54
 AdjustableTensionBack………………………………………………...  54
ScoutOptions
 WheelLockAdjustment&HandBrakes………………………..........  56
ImportantInformation
 Maintenance,Operating&SafetyInstructions………………….......  61
 Warranty……………………………………………………………............  67

1
CONVAID USER’S GUIDE
READBEFOREUSE
Read manual completely before use and fully understand its content. Familiarize yourself with the
handling and functions of the product before use and practice them. Any caregiver that is going to
operate this chair should also read the manual in full.
You are responsible for the safety of the user. The safety of the user could be affected if you
do not follow the instructions in this manual. Nevertheless, not all possible circumstances and
unpredictable situations can be covered by this manual. Reason, care, and circumspection are
not features of the product; they are required of persons who use the product. If instructions are
not clear and further explanation is necessary, please contact your Convaid provider. If you do not
follow all instructions and warnings, damage to the chair or serious injury may occur. The latest
version of all instructions and product safety notice are available on the Convaid website www.
convaid.com and can be printed in larger sizes. Additional video instructions are also available for
reference purposes.
DEFINITIONOFSYMBOLS
WARNING!
The word “WARNING” and/or the symbol shown above indicates
practices that are unsafe or dangerous and could result in serious injury or
death to the occupant of this chair or others.
WARNING! READ INSTRUCTION MANUAL!
 Additionalsymbolsaredenedthroughoutthismanualalongwith
operating instructions.
 Thissymbolindicatespotentialngerentrapment.
This symbol indicates correct lifting points for safe moving and handling.
This symbol indicates manufactured date.
This symbol indicates maximum user's weight.

2
CONVAID USER’S GUIDE
This symbol indicates a wheelchair which cannot be used in motor vehicle as
vehicle seat. This wheelchair does not comply with WC19 (RESNAWC-4:2012 or
ISO7176-19:2008) and cannot be used as a vehicle seat to transport the user in
a vehicle.
This symbol indicates a wheelchair which can be used in motor vehicle as
vehicle seat. This wheelchair complies with WC19 (RESNAWC-4:2012 and
ISO7176-19:2008) and can be used as a vehicle seat to transport the user in
a vehicle.
This symbol indicates the position of an anchor point when using a 4 -point
tiedown system(WTORS) during transit.
CHOOSE THE RIGHT CHAIR & SAFETY OPTIONS
There are several options available to meet the needs of the wheelchair user. Make sure
that your (and your health care provider’s) choice of chair and other added options takes
into account the user’s comfort, positioning, physical limitations, and hazards that may be
encountered during daily use. Operating the manual wheelchair outside of the
recommendations provided by the manufacturer can lead to a dangerous situation.
The wheelchair is not suitable for jogging, running, skating or similar activities. Swiveling
front wheels tend to wobble at higher speeds and can cause a sudden stop, and the
wheelchair can tip over. Use the wheelchair only at regular walking speed. Under no
circumstance should you let go of the push handle while pushing.
Thedurabilityofthisproductisveyearswhenitisusedwithpropercareandmaintenance
according to the user’s manual.

3
CONVAID USER’S GUIDE
One Piece Height Adjustable
Push Handle*
*Sizes: 10, 12, 14 and 16 only
Self-Tensio®
Chair Warning Label
Serial Number Label
Foot Operated
Wheel Locks*
Transit Anchor
Logo Sticker
Height Adjustable Swing-Away
Footplates
190.5” x 51” (7.5” x 2”)
Front Solid Wheels
292 mm x 63.5 mm (11.5” x 2.5”)
Rear Solid Quick Release Wheels*
Transit Anchors
(Options)
Never leave occupant unattended. Failure to read
and follow user guide instructions could result in
serious injury. To obtain a replacement user’s guide
email [email protected] or call 888-266-8243
ProductOverviewFixed-TiltCruiser

4
CONVAID USER’S GUIDE
Overall Length 1220 mm 1120 mm 1250 mm 1320 mm 1400 mm
Overall Width 560 mm 600 mm 650 mm 700 mm 720 mm
Overall Height 940 mm 970 mm 940 mm 1020 mm 970 mm
Folded Length 1190 mm 1220 mm 1190 mm 1350 mm 1270 mm
Folded Width 380 mm 380 mm 410 mm 410 mm 380 mm
Folder Height 430 mm 430 mm 430 mm 430 mm 430 mm
Weight of Chair 12.3 kg 12.3 kg 12.7 kg 14.5 kg 13.6 kg
Pivot Width 1100 mm 1180 mm 1150 mm 1340 mm 1410 mm
Seat Angle 30° 30° 30° 30° 30°
Seat Depth 150-280 mm 200-330 mm 250-380 mm 280-410 mm 360-530 mm
Seat Width 250 mm 300 mm 350 mm 400 mm 450 mm
Seat to Floor 580 mm 640 mm 530 mm 580 mm 660 mm
Seat Back Angle 85°/90°/95° 85°/90°/95° 85°/90°/95° 85°/90°/95° 85°/90°/95°
Seat Back Height 530 mm 560 mm 635 mm 690 mm 635 mm
Seat to Footplate 130-530 mm 130-635 mm 100-560 mm 100-560 mm 200-580 mm
Weight Capacity 34 kg 34 kg 45.5 kg 77 kg 114 kg
Transit Weight Capacity 30 kg 30 kg 45.5 kg 77 kg 77 kg
Push Handle Adjustment 710-1090 mm 740-1170 mm 740-1170 mm 780-1220 mm N/A
Material (frame) Steel / Aluminum
Material (plastic) Fiber glass strengthened polyamide
Material (cushion) Fire-resistance foam*
Material (fabrics) Fire-resistance nylon, polyester*
Cruiser CX10 CX12 CX14 CX16 CX18
* Resistance to ignition of upholstered parts complies to BS-EN 1021-1 and -2

5
CONVAID USER’S GUIDE
CruiserProductLine
Cruiser Cruiser 18
Cruiser Scout

6
CONVAID USER’S GUIDE
GeneralWarnings
WARNING: The operator/caregiver must read and understand this manual
prior to operating this equipment. If you are unable to understand any part
of the manual, contact your supplier for assistance.
WARNING: Please keep packaging material away from children. Plastic
packaging presents the danger of suffocation.
WARNING: The chair is only intended to carry one user at a time. Do not
carry more than one user at a time.
WARNING: The weight carried by the Cruiser chair must never exceed the
total weight capacity of the chair. (Maximum occupant size plus any items
carried.) When using the chair in transit, all accessories must be removed
from the chair and secured separately.
WARNING: If the user’s weight is less than 50lbs (22.7kg), the use of
anti-tip tubes is encouraged.
WARNING: To avoid tipping, do not hang item from the push handle.
WARNING: To reduce the risk of an accident:
• ALWAYS carefully read the User Guide and get comfortable operating
the chair.
• ALWAYS watch for obstacles and avoid them as often as possible.
• MAKE SURE that the chair operates properly. Repair any problems
before use.
• ALWAYS verify that the quick release axles are locked so that the back
wheels do not come off
• ALWAYS secure the user into the chair during use.
WARNING: Pay particular attention when on slopes and inclines to prevent:
• The user from falling out of the chair.
• The chair from tipping over.
• The chair from rolling away.

7
CONVAID USER’S GUIDE
WARNING: Do not go up or down stairs without the assistance of another
person or with user in the chair. If devices such as ramps or elevators are
available, please use them. If they are not available, then the chair should
be carried over the obstacle by two people without the user in the chair.
WARNING: Alwayssecureuserwithbeltrst,beforemakinganyother
adjustments.
WARNING: Before removing the user from the chair and before returning
the user to it, always engage the wheel locks. Never remove or place user
without engaging the wheel locks.
WARNING: Never leave the user unattended in the chair even when they
are strapped in and the wheel locks are engaged.
WARNING: Do not stand on the foot support when getting into or out of the
chair.
WARNING: When the user reaches for objects in front, to the side, or be-
hind the chair, be sure that they do not lean out of the chair too far since the
shift in the center of gravity might cause the chair to tilt or tip over.
WARNING: Positioning belts should never be used as a safety restraint de-
vice in a motor vehicle when transporting chair with occupant. An additional
WC19 (ISO 7176-19) compliant automotive type seat belt is required when
the chair is used in transport vehicles.
WARNING:Duringtransit,ave-pointharnessshouldbeusedforoccupant
weight less than 51lb (23kg).
WARNING: Do not use the chair unless it has proper tire pressure.
(Front 36 psi/ Rear 30 psi, 248kPa/200kPa, 2.5BAR/2.0BAR) Do not over
inatethetires.Failuretofollowtheseinstructionsmaycausethetireto
explode and cause harm. Tire size and maximum pressure are listed on the
wheel.

8
CONVAID USER’S GUIDE
WARNING: Ensure the wheels are installed properly. You will hear a “click”
when wheel locks into place.
WARNING: Do not leave/store the chair in direct sun/heat over a long \
period of time. Check the temperature of the chair prior to usage.
WARNING: Removable accessories that can be removed without tools will
not cause adverse effects on wheelchair.
WARNING: CX-18 exceeds the maximum recommendation width. Use
caution when entering/exiting small space.
WARNING:TheCruisercouldloseitsameresistantcharacteristicswhen
using aftermarket seating or cushions.
WARNING: For occupant safety, the seat belt should be used at all times.
• Do not leave user unattended.
• Do not strap user too tight.
• Straps should not interfere with breathing or circulation.
• Always apply wheel locks before letting go of the chair.
• If front edge of seat is at or forward of the point where tires touch the
oor,avoidusingfrontofseattubesforsupportduringentryorexitfrom
chair to prevent tipping.
• Avoid using footplates for weight support during exit or entry of the chair.

9
CONVAID USER’S GUIDE
Chair Set Up & Adjustment
ContentsintheBox
Listofitemsincludedinthebox:
• Left and right footplates
• Accessories as ordered
• Cruiser as ordered
• Allen wrench (5/32”)
• User’s guide
Toolsneeded:
• 5/32” Allen wrench
• 3/8” Wrench
• 7/16” Wrench
• Phillips Screwdriver
HowtoRemoveChairfromBox
1. Placeboxatontheoor.
2. Verify that package is in good shape and that no damage has occurred during
shipping.
3. Remove the chair base, seating module and accessories from the packaging ma-
terial.
4. Check to make sure that your order is complete.
PreparingtheChairforUse
Once you have all components as ordered, the directions for use in this User Guide will
guide you through the process of preparing the chair for use:
Convaidrecommendstheinitialtting,adjustments,andsetuptakeplacewiththehelp
of your Convaid Representative and/or Convaid Service Dealer. However, if the instruc-
tions contained in this manual are followed carefully, a caregiver or attendant will be
able to set up and assemble the chair.

10
CONVAID USER’S GUIDE
Note: One-Piece Push Handle will unfold as the chair opens.
NOTE: For Planar Seat and Back installation &
instruction, see page 50.
UnfoldingtheChair
Fig. 1
Fig. 2
Fig. 5
Fig. 8 Fig. 9
Fig. 6 Fig. 7
Fig. 3 Fig. 4
1. Laychairatongroundandunbuckleclosurestrap.Fig.2
2. Stand chair on front caster, grasp side of Push Handle
and push down on Seat Tube. Fig.3
3. Pressdownrmlyonseattubestoensurethechairis
completely unfolded. Fig.4
4. Using your foot, push down on Lower Rear Lock Brace
until it locks into a straight position. Fig.5
5. Press grey buttons on each side of Push Handle at the
same time, and rotate Push Handle to desired height.
Fig. 6,7
6. Swing footplates down into position. Fig. 8,9

11
CONVAID USER’S GUIDE
FoldingtheChair
1. Swing footplates to the side. Fig.10,11
2. Press grey buttons on each side of Push Handle and rotate Push Handle down completely.
Fig.12,13
3. Unlock Rear Lock Brace by kicking up on center of brace with foot. Fig.14
4. Grasp one side of Push Handle and pull up on seat fabric or seat tube with opposite hand.
Fig.15,16
5. Lay chair back onto Push Handle. Push down on tubing above front tires until chair is folded.
Fig.17
6. Buckle closure strap. Fig.18
NOTE: Always properly secure the Cruiser in a safe location when transporting Cruiser as a
cargo in vehicle.
Fig. 10
Fig. 13
Fig. 16
Fig. 11
Fig. 14
Fig. 17
Fig. 12
Fig. 15
Fig. 18

12
CONVAID USER’S GUIDE
Lifting/CarryingtheChair
Fig. 19
Fig. 20
Fig. 21
To Lift/Carry the Chair:
1. To safely lift or carry the chair, always use both hands.
2. With one hand hold the chair by the front x- brace bar. Fig. 19
3. With the other hand hold the chair by the back x-brace. Fig. 20
WARNING: Always secure the chair with the closure strap
when transporting the chair.

13
CONVAID USER’S GUIDE
Convaid’s lightweight, folding chairs are designed to be more than just a convenient
chair.Orderthecorrectsizechairbyrstdeterminingtheuser’sheight,weightand
seatingmeasurements.Properly-tted,Convaidchairswillprovideyearsofcomfortable
use. As your child grows, refer back to this Fitting Guide to adjust the dimensions of the
chair.
Correct seating and positioning encourages good posture, which in turn aids circulation,
breathinganddigestion.Pleasetakethetimetoproperlyadjustthechairtottheuser.
If the user is not correctly positioned, check the accessories section of this manual to
see if one or more of our accessories would help to facilitate posture or consult a
physical therapist. Improper seating can cause problems. Please consult a physical
therapist or doctor for additional guidance.
Fitting Guide
SeatBackHeight
SeatWidth
Seat back height
Seat width
Seat back height varies according to chair type and seat width.
Headrest extensions are available when extra height is needed to
support the head. To determine the seat back height, measure the
distance from the seat to the top of the shoulder or the upper part
of the head. Fig.22
Fig. 22
Fig. 23
Proper seat width enables the user to sit comfortably and pre-
ventsproblemsfromdeveloping.Whileuserisseatedonaat
surface, measure the distance from hip to hip. Fig.23
The user should have enough room to prevent hips and thighs
from rubbing against the frame. However, the chair should not
be too wide or the user will slide around and posture could be
affected.The seat width measurement for the Cruiser is taken
from the inside of the arm rest tubes. Fig.23

14
CONVAID USER’S GUIDE
Fig. 24
Fig. 25
Fig. 26
Fig. 27
SeatDepth
SeatDepthTubeReplacement
Measure the distance from the
most posterior portion of the
buttocks to the back of the knee.
Subtract from that measurement
1-2” (25-51mm) to allow ade-
quate clearance between the seat
and the back of the knee. Fig.24
Tochangeseatdepth:
1. Partially fold the chair to relieve
fabric tension. Undo the Velcro®
back panel of the two-piece seat.
2. Grasp end of seat tube, press
spring button and move seat tube
until spring button relocates into the
desired hole.
3. Repeat for other side of seat.
Fig.25
Seat depth
1. To change seat tubes or remove the seat tubes,
press spring button. To install new seat tubes, press
spring button and release when desired setting is
achieved Repeat for opposite side. Fig.26,27
2. Reinstall fabric. Repeat for opposite side.
Note: For Cruiser Planar model, skip step 2.

15
CONVAID USER’S GUIDE
1. Remove Seat Upholstery. Fig.28,29
2. Change and Install Seat Depth Tubes.
3. Press spring button and move Seat
Depth Tube to desire setting. Fig.30
4. Install Support Strap. Note: Make sure
rough, shiny side of strap is facing out.
Fig.31-34
5. Install Seat Upholstery. Fig.35
AttachingSupportStrapforSeatExtensionTubes
Two-PieceSeat
Fig. 28
Fig. 30
Fig. 34Fig. 32
Fig. 29
Fig. 31
Fig. 35Fig. 33
Fig. 36 Fig. 37 Fig. 38
FOR TEXTILENE UPHOLSTERY: Only Applicable to: CX 14-18
Make sure the seat depth
tube inserts into the black
web loop located on the
inside corner of the
textilene upholstery. Fig.36-38
The lower seat panel is attached to the back panel with Velcro®.
It is used to take up slack in the seat panel after seat depth adjustments have been made.
Fig. 39
Excessive Velcro®
overlap lifts seat
fabric and pushes
hips forward, cre-
ating poor posture
and reducing
effective seat
depth. Fig.39
Correct
Velcro®
adjustment
provides room
for hips, and
makes greater
use of seat
depth.
Wrong Correct

16
CONVAID USER’S GUIDE
Fig. 40 Fig. 41
Fig. 43
Fig. 42
Fig. 44
Fig. 45
Wheels
QuickReleaseWheels
Anti-ShimmyAdjustment
TIRE REMOVAL
1. To remove, press down and hold the Rear Wheel Locking Pin. Grasp wheel and
pull. Fig.40,41
2. No tools are required to remove tire. Fig. 42
WARNING: Ensure the wheels are installed properly. You will
hear a “click” when wheel locks into place.
TIRE INSTALLATION
Slide wheel onto rear axle
and push with ball of hand
until it clicks into place.
If the front wheels develop a shimmy, use a wrench to tighten the
stem nut. Adjust the stem nut clockwise until the shimmy disappears.
Fig.45