ConvaTec Esteem + User manual

Esteem™+One-Piece Pouch with
ConvaTec Moldable Technology™
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Moldable disc & pouch come attached.
4
Remove moldable disc from the pouch.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Remove liner marked #1. This is
the molding side.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Roll and mold the disc to the size of the
stoma. Do not stretch, pull or cut. Pinch
into place once desired size is reached.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Check the size of the molding.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Remove liner marked #2.
This side will go on the skin.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Place the disk on the body. Push the roll
of adhesive toward the stoma to ensure
a close fit. Skin should be clean and dry.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Remove liner marked #3.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Separate the sides of the
pouch to allow some air to
enter the pouch.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Place pouch on the moldable disc
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Smooth/hold skin barrier in place
for about 30 seconds.
Moldable Disc application
1
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4.
9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Remove pouch release liner.
Applying pouch to the Moldable Disc
2
Refer to package insert for complete instructions.

14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
To close the pouch, fold the end up towards you 3 times until interlocking closures line up. Keep a small amount
of air in the pouch. Press and pinch across the entire closure to secure.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
For added discretion, turn the Lock-it-Pocket™inside-out to hide tail inside.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
TM indicates trademarks of ConvaTec Inc. Esteem is a registered trademark in the U.S.
© 2014 ConvaTec Inc. AP-014407-MM
Notes:
Find out More 1-800-422-8811 Monday – Friday 8:30 am – 7:00 pm www.ConvaTec.com
Esteem™+One-Piece Pouch with
ConvaTec Moldable Technology™
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
To empty pouch, tilt tail up towards the body. Peel open the closure
and unravel tail. For easier opening, push sides together.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
When it’s time to change pouch,
(either drainable or closed-end)
the disc and pouch can be
removed as one.
InvisiClose™Tail Closure
3
Emptying and removing drainable pouch
4