Converters.TV 470 User manual

DVI Splitter with HDCP
Compliance ID#470
Operation Manual

Introduction
The DVI Splitter with HDCP Compliance accepts DVI
signal from a computer or video equipment and splits
up to two, identical and buffered outputs Each of the
output can run up to 15 meters using standard DVI cable
•It also supports a wide range of input resolution (25-
165 MHz) from VGA to UXGA
•Can be cascaded up to 3 tiers
Features
1 HDCP compliant
2 Universal EDID built-in
3 Supports DVI-D (29-pin) standard connectors
4 DVI DDC (Display Data Channel) link between each
output and display is independent
5 LED indicators
6 Supports high resolution input:
PC: VGA, SVGA, XGA, SXGA and UXGA, &
HDTV: 480p, 576p, 720p, 1080i and 1080p@ 60Hz
Connection
1 . DVI input port- Connects to the DVI output of your
source equipment
2.Sync LED: Sync led will light up when source signal is
connected
3.LED :Power LED will light up when power plug on
4.Power Jack
5.DVI output port 1: Connects to the DVI input of your
display 1
6.DVI output port 2: Connects to the DVI input of your
display 2

Specifications
Input connector: 1 input (DVI Female)
Output connector: 2 inputs (DVI Female)
Frequency bandwidth: 1 65Gbps (Single link)
Power consumption: 6W Max
Operating temperature range: 5 degree to 40 degree C
Operating humidity range: 30 to 80% RH
Power supply: 5VDC power supply with
universal plugs
Dimensions(mm): 102(W) x125(D) x30(H)
eight: 280g
Installation

DVI-D Pin Configuration
DVI-Digital (DVI-D): Supports display-only connections
between the host computer and display This interface
is designed for a 12 or 24-pin connection to enable
single or dual-link mode activation
DVI-D Recepticle Connector