Converters.TV 781 User manual

DVI Splitter 1 in : 4 out
- ID# 781
Operation Manual

Introduction
The DVI Splitter is a high performance HDCP compliant DVI distribution
amplifier.
It allows same DVI or HDMI signal source to split up to four identical
and buffered displays for multi viewing purpose.
Features
1. Built in EDID and HDCP bypass ensures each output can be displayed
independently.
2. HDMI source and displays are compatible by using the HDMI to DVI
adaptor cable.
3. Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480p to 1080p.
4. Can be cascaded up to 3 layers.
5. Each of the buffered output can run up to 15 meters.
Operation Controls
and Functions
Front Panel
1. DVI input: Connect to the DVI or HDMI output of your source equipment
such as DVD player or PC graphic card.
2. DVI output 1: Connect to the digital input of your first display.
3. Sync Led: The led will illuminate when the source signal is connected.
4. Power input: Plug the supplied 5VDC power supply into the unit and the
led will illuminate when connected.
Rear Panel

1. DVI output 2/3/4: Connect these ports to the digital input of each output
display.
Connection and
Installation

Specifications
Frequency bandwidth: 1.50Gbps(single link)
Input/Output: 1-in/4-out DVI female port
Power consumption: 6 Max
VDC universal power supply
Operating temperature range: 0 ℃~ 40 ℃
Operating humidity range: 30 to 80% RH
Dimensions: 102( ) x141(D) x 38(H)mm
Weight: 550g