Converters.TV 889 User manual

1 by 3 Mini Display Port
Extender Splitter - ID# 889
Operation Manual

Introduction
For those who want to display large content the 1x3 Mini Display Port
Extender Splitter is for you. Able to extend an i age onto 2 or 3 displays,
this device also allows you to split an i age two or three ti es to
connected displays while giving you a platfor that is perfect for ulti-
tasking. This 1 by 3 Mini Display Port Extender Splitter allows users to enjoy
i ages or video in HD resolution up to 1920 x 1200 on ultiple onitors
fro a single digital output port. The 1 by 3 Mini Display Port Extender
Splitter is a useful device for extending displays and splitting i ages.
Features
 Supports DisplayPort v1.1a, VESA DDM Standard,
HDCP v1.3 and EDID v1.4
 Supports link rates of 2.7G ps (HBR) and 1.62G ps (RBR)
 Fully HD compati le and provides full display performance with zero lag and no display
limitations
 Does not require software updates
 Quality La (WHQL) testing/qualification
 Supports output resolutions up to 1920 x 1200
 Works with any desktop and note ook computer which has a DisplayPort output port
 Provides exceptional Secured Content Protection with HDCP 1.3 for digital content
including video and audio
 Plug and Play
Applications
 Ho e & Office display
 Stock market
 Gaming market
Syste
Require ents
Input source equip ent such as Apple, PC or any Mini Display Port output
device with a Mini Display Port connection cable. Output display such as an
Apple onitor or any Mini Display Port input display with Mini Display Port
connection cable.

Operation Controls
and Functions
Front Panel
① MDP OUT 1~3: Connect these slots with the output displays Mini Display Port
input port in order to send a signal.
Note: It is suggested to use the sa e type/ odel of display in order to
get opti al i age quality. When the input source’s ti ing is atched with
the output display’s ti ing, the device will first extend the i age according to
the specifications of the connected output display. If the input sources ti ing
does not atch the output display’s ti ing the device will then split the signal
to atch the nu ber of the connected display to show an identical i age.
(Detail infor ation please refer to section 8. Ti ing table for onitors).
Rear Panel
① On/off switch: Push this switch to turn the device on or off. The green LED
will turn on when the device is switched on.
②DC 3.3V: This slot is where you plug the 3.3V DC power supply into the unit
and connect the adaptor to an AC outlet.
③MDP IN: This slot is where you connect the input source equip ent such as
a PC or any output device that has a Mini Display Port.

Top Panel
① LINK LED: The green LED will turn on when the input source device is
connected.
②POWE LED: The green LED will switch on when the device is powered on.
③OUT 1~3 LED: The green LED will turn on when the output port is connected
with the output display.

Ti ing tables
for onitor
The 1 by 3 Mini DisplayPort splitter is a s art device with a built in feature that
can define which and how any onitors are connected and can trans it
the proper signal for the display. Below is the expanded ti ing list which is
supported by the device.
Two monitors mode
From PC To monitor Vertical refresh rate (Hz)
3840 x 1200 1920 x 1200 60
2560 x 1024 1280 x 1024 60
2048 x 768 1024 x 768 60
3360 x 1050 * 1 1680 x 1050 60
3200 x 1200 * 1 1600 x 1200 60
2880 x 900 * 1 1440 x 900 60
1600 x 600 * 1 800 x 600 60
1280 x 480 * 1 640 x 480 60
2800 x 1050 * 1 1400 x 1050 60
Three monitors mode
From PC To monitor Vertical refresh rate (Hz)
3840 x 800 1280 x 800 60
3840 x 1024 1280 x 1024 60
3072 x 768 1024 x 768 60
2400 x 600 * 1 800 x 600 60
1920 x 480 * 1 640 x 480 60
4080 x 768 * 1, * 2 1360 x768 60
3840 x 720 * 1 1280 x 720 60
2160 x 480 * 1 720 x 480 60
3840 x 960 * 1 1280 x 960 60
Note:

1. The timing is listed in the EDID extension lock. Some old GPU drivers may not e
supported.
2. The total horizontal pixel include the active area and lank area is larger than 4096, some
GPU driver may not support the timing.
3. For Apple Cinema Display support timing please refer to
http://www.apple.com/displays/specs.html
Connection

Specifications
Output esolution 1920 x 1200
Input port 1 x Mini DisplayPort
Output ports 3 x Mini DisplayPort
Power Supply 3.3V / 1.5A DC (US/EU standards,
CE/FCC/UL certified)
ESD Protection Hu an body odel:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions(mm) 100 (W) x 70 (D) x 20 (H)
Weight(g) 90
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C~60°C / -4°F ~ 140°F
Power Consumption 3W
elative Humidity 20~90% RH (non-condensing)