Converters.TV 15342 User manual

Dual-link DVI/Mini DisplayPort/VGA
to HDMI Scaler - ID# 1534
Operation Manual

Introduction
This HD High Resolution Scaler can switch and convert Dual-link DVI, Mini
DisplayPort and V A/Component Video inputs to an HDMI output, along
with their associated audio signals. With the ability to scale a wide range of
resolutions, the operation of all features can be easily handled through on-
panel controls, IR remote control, or by RS-232 protocol.
Features
• Supports Dual-link DVI and Mini DisplayPort input resolutions up to
2560×1600@60 Hz (RB), PC up to 1920×1200@60/75 Hz and
Component Video up to 1080p@50/60 Hz
 Supports digital and analog audio bi-directional conversion,
embedding and de-embedding for the audio signals from individual
inputs
 Supports Component Video input via D-sub 15-pin to 3 RCA phono
adaptor
Applications
• Scale Dual-link DVI, Mini DisplayPort and V A/Component Video
input resolutions to HDMI output resolutions
 Convert Dual-link DVI, Mini DisplayPort, V A and Component Video
signals to HDMI signal
 Commercial presentation switching scaler
System Requirements
Dual-Link DVI/Mini DisplayPort/PC/YUV sources and output to an HDMI
display.

Operation Controls
and Functions
Front Panel
1. MENU/ENTER:
Press this button to ENTER the On-screen Display (OSD) menu. Press
again to confirm the selection.
2. MINUS (-)/IN:
When in the OSD menu, press this button repeatedly to move down
through the menu. When not in the OSD menu, press this button to quickly
select the required input.
3. PLUS (+)/OUT:
When in the OSD menu, press this button repeatedly to move up through
the menu. When not in the OSD menu, press this button to quickly select
the required output resolution.
Note:Pressing '−' (MINUS) and 'ENTER' simultaneously will immediately
switch the output resolution of the device to 720p@60 Hz. Pressing '+'
(PLUS) and 'ENTER' simultaneously will immediately switch the output
resolution of the device to X A.
4. OPTICAL IN:
Digital audio TOSLINK input. Use this input to connect to a source with an
OPTICAL cable.
5. AUDIO IN:
Analog audio input. Use this input to connect to analog source with a
3.5mm mini-jack cable.
6. OPTICAL OUT:
Digital audio TOSLINK output. Use this output to connect to an Amplifier or
Active Speakers to an optical digital input with an OPTICAL cable.
7. AUDIO OUT:
Analog audio output. Use this output to connect to Active Speakers or an
Amplifier with a 3.5mm mini-jack cable.
8. HDMI OUT:
Connect to a HDMI equipped TV/monitor for display of the source signal.
. IR Window:
Receives the IR signal from the supplied IR Remote only.
10. DC 5V and POWER LED:
Connect the supplied 5V DC power supply to the unit and plug the power
supply to AC wall outlet. Once the system turns on the LED will turn RED.

Back Panel
1. RS232:
Connect to a PC or RS-232 control system with a D-sub 9-pin cable for RS-
232 control.
2. SERVICE:
Manufacturer use only.
3. MDP IN:
Connect to a DisplayPort source device such as a PC/Laptop with a mini-
DisplayPort cable.
4. Dual-Link DVI IN:
Connect to a DVI source device such as a PC/Laptop with a DVI cable.
5. PC/COMP IN:
Connect to a V A source such as a PC/Laptop source equipment with a D-
sub 15-pin cable or to a Component Video source with a D-sub 15-pin to 3
RCA phono adaptor for component video signal input.
Remote Control 1. POWER:
Press to turn the system ON/OFF.
2. VIDEO IN:
Press the required key to directly select
the video source (DVI/
MDP/PC/COMP).
3. AUDIO IN:
Press the required key to directly select
the audio source
(AUDIO/OPTICAL/MDP) or to MUTE the
system.
4. MENU:
Press this button to ENTER the OSD
menu.
5. EXIT:
Press this button to EXIT the OSD
menu.
6. ENTER and ▲/▼/◄/►:
Press ENTER button to confirm the
selection
and press the arrow keys to navigate the OSD menu.
7. INFO:
Press to show the input and output resolution information.
8. OUTPUT:

Press to show the output resolution table.
. NATIVE:
Press to switch to the native resolution.
RS- 3 Protocols
 
   
   
   
    
   
    
   
   
 
!  ! 
Baud Rate: 19200 bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
RS- 3 Commands
" #$
POWER ?
POWER ON
POWER OFF
Power Status
Power On
Power Off
%&'()
%&
*

(*
%"&$++
%"&$+%&
%"&$+*,#$-
%"&$+
%"&$+$
./&()
./&(
(&.0
*.
*/'
*/'(
*/'(11
.+"&$++
.+"&$+./&(
.+"&$+(&.0
.+"&$+*
*++#
*+(
*+(

&1()
&1((
&1((11
&1(&0.2
&3(+#
&3((
&3((
&3((4(
(//)
 5
5
5 5
%.
%.
6.
6.
/6.
7/6.
76.
.&%'
(+$++#
(+$+ 5
(+$+5
(+$+5 5
(+$+%.85 59
(+$+%.8 55559
(+$+6.85 9
(+$+6.8 559
(+$+/6.855559
(+$+7/6.8!5559
(+$+76.8 5 559
(+$+:-;
'&)
'&&
'&'6
'&+#
'&<-&
'&<-'
1''<.=)
1''<.=(
1''<.=(11
=-1":>+#
=-1":>':
=-1":>#:
.') %"&$+?+#
%'&() 1@%#
'1./0 #1-+
.:+) .:+
Note: Any commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive
OSD Menu
First Level Second Level Third Level
&$+%" 
(*
%&
*
'
&$+.+" .+"
($

*
*+
'
(+$+#+ 5A 5
 5A5
!5A5 5
5A 5
55A55
5A 
 5A5
55A55
!5A55
 5A 55
<-;
'
'&*" &
'
'
&3(*" (
(
'
.:+, 5 17%3
1-# -##
'
'

Specifications
Mini DisplayPort Video 3:$#B3:$#40
Bandwidth
Input Ports A+,>%&CA*#$-CA%.
8,#+:,$9CA($CA3*,
D>
Output Ports AE*&CA($CA3*,D>
Power Supply %43.8/4'/#""#C'414/0
"9
ESD Protection E+:"-"F
G >%8,?$"#H?9
G>%8"#H?9
Dimensions 879A!89A 8E9
Weight 55?
Chassis Material .++
Color <>
Operating Temperature 5IJ5I4I1J5I1
Storage Temperature K5IJ5I4KI1J5I1
Relative Humidity 5J!5LE8,"#?9
Power Consumption !7

Connection Diagram

Supported Input Resolutions
Input Resolution PC DVI MDP COMP
5A5M  N N N
5A55M  N N N
5A55M  N N N
5A 58%.9M5CCC  N N N
800×600 (SV A) @56, 60, 72, 75,
85, 120RB
N N N
 A 5M5 N N N
1024×768 (X A)@60, 75, 85,
120RB
N N N
 5A5M5 N N N
1280×768@60RB, 60, 75, 85,
120RB
N N N
1280×800@60RB, 60, 75, 85,
120RB
N N N
 5A!5M5C  N N N
 5A5M5CC  N N N
5A M5C5< N N N
A M5<C5 N N N
1400×1050 (SX A+)@60RB, 60,
75
N N N
1440×900 (WX A+)@60RB, 60,
75, 85
N N N
55A!55M5< N N N
55A558/6.9M5 N N N
 5A55876.9M5<C5 N N N
!AM5C  N N
 A!M5C  N
!5A5 5M5 N N N
!5A55M5<C5 5< N N
!5A5M5 N N
5A 54$ N
5A4$ N
54$MCC5C5C5 N

5 5M5C5 N
5 5$MC5C5C5 N
5 A5 5MM5C5 N N N
5 AMM5< N N
5A55M5< N N
Supported Output Resolutions
Output Resolution
640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1200@60,
1280×800, 720×480p, 1280×720p (Default), 1920×1080p
Note: When the output resolution is set to 'By Native' but it does not
match the built-in supported resolution the output resolution will
automatically be set to the default of 1280×720p.