Converters.TV 15353 User manual

HDBaseT-Lite HDMI over CAT5e/6/7
Transmitter and Receiver with IR and high
Bandwidth - 15353
Operation Manual

Introduction
The HDMI Extender over single CAT5e/6 incorporating IR signal transfer allows for a ore
efficient syste setup and is easy to install.
Unco pressed video and audio can be trans itted to distances of up to 60 eters
(1080p) and supports High Definition Audio and 3D signals.
Designed with HDBaseT technology for greater flexibility in custo installations with full
HDMI and control signal transfer over a single CAT5e/6 cable.
Applications
1Residential entertain ent sharing and control
2University lecture hall display and control
3Retail sales display and control
4Meeting roo presentation and control
5Co ercial advertising display and control
System
Requirements
HDMI source equip ent such as DVD/Blu-ray player/PC and TV/ onitor/projector
with HDMI input and HDMI to CAT5e/6 cables.
Features
•HDMI with 3D, 4K×2K support, HDCP and DVI co pliant
•Supports HDMI (including HDCP) over a single CAT5e/6 up to 60
•Full HD resolution support (1080p@60Hz/36-bit), 3D, 4Kx2K and PC resolution
support (VGA to WUXGA) over CAT5e/6 cable
•HDMI input up to 15 with 8-bit resolution or 10 with 12-bit resolution
•HDMI output up to 15 with 8/12-bit resolution
•Supports HDCP repeater and CEC bypass
•Supports High Definition LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-
HD Master Audio trans ission
•Co pact size with stylish design
Note: Displaying HDMI 4k x 2k resolution require the standard 4kx2k HDMI cable and
display in order for proper image displaying.

Operation Transmitter Front and Rear Panels
Controls and
Functions
1. IR1 OUT/Blaster
Connect to the supplied IR Blaster for IR signal trans ission to the source equip ent
fro IR1 IN's IR signal. Place the IR Blaster in direct line-of-sight of the equip ent to
be controlled.
2. HDMI IN
Connect to the HDMI input source devices such as a DVD player or a Set-top Box
with HDMI cable or DVI to HDMI cable.
3 IR2 IN/Extender
Connect to the supplied IR Extender cable for IR signal reception and trans ission to
IR2 OUT. Ensure that re ote being used is within the direct line-of-sight of the IR
Extender.
4 DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to an AC
outlet.
5 CAT5e/6 OUT
Connect to the Receiver unit with a single CAT5e/6 cable for trans ission of all data
signals. The yellow LED will illu inate when both Trans itter and Receiver are
connected together with power supply. The green LED will illu inate when the
power supply is connected to the device.

Receiver Front and Rear Panels
1 DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.
2 CAT5e/6 IN
Connect to theTrans itter unit with a single CAT5e/6 cable for trans ission of all
data signals. The yellow LED will illu inate when both Trans itter and Receiver are
connected together with power supply. The green LED will illu inate when the
power supply is connected to the device.
3 IR1 IN/Extender
Connect to the supplied IR Extender cable for IR signal reception and trans ission to
IR1 OUT. Ensure that re ote being used is within the direct line-of-sight of the IR
Extender.
4 HDMI OUT
Connect to a HDMI equipped TV/ onitor for display of the HDMI input source signal.
5 IR2 OUT/Blaster
Connect to the supplied IR Blaster for IR signal trans ission to the display side fro IR2
IN's IR signal. Place the IR Blaster in direct line-of-sight of the equip ent to be
controlled.
Transmitter and Receiver Top Panels

IR Pin Assignment
Specifications
Video Bandwidth 340 MHz/10.2 Gbps
Transmitter
Inputs 1×H MI, 1×IR Extender
Outputs 1×RJ45, 1×IR Blaster
Receiver
Inputs 1×RJ45, 1×IR Extender
Outputs 1×H MI, 1×IR Blaster
ESD Protection Human Body Model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Power Supply 2×5 V/2.6 A C (US/EU standards, CE/
FCC/UL certified)
Dimensions 55 mm (W)×75.5 mm( )×22.5 mm (H)/Jacks
Excluded
55 mm (W)×82.2 mm( )×22.5 mm (H)/Jacks
Included
Weight 60 g (TX), 66 g (RX)
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0 ˚C~40 ˚C/ 32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 3 W (TX), 5.5 W (RX)

Connections