Converters.TV 15108 User manual

DVI Digital Video Scaler
ID#15108
Operation Manual

Introduction
The Digital Video Scaler is designed to do scaling and source-switching from CV,
SV, PC and DVI input signals, to DVI output port. The external audio input signals
can be switched and sent to the /R output port correspondingly with the video
source selection. The control can be done through on-panel buttons, IR remote, or
RS-232, and there is OSD (On Screen Menu) providing selection and system
information. The device provides full range of output resolutions, up to 1080p for
HDTV timing, and WUXGA (RB) for PC timing.
Features
•Supports multiple formats of video and audio inputs to be converted to
DVI
•Supports synchronized output for input video and output audio signals
•Supports 3D de-interlace, noise reduction and Comb filter
•Supports frame rate conversion
•Supports RS-232, IR, Remote and on panel controls
System
Requirements
Input source equipments such as PC/NB or DVD Player with HDMI to DVI adaptor
and output display with active speaker and connection cables.
pplications
●Analog to Digital video signal conversion
●Displaying low resolution video on High-Definition display

Operation Controls
and Functions
Front Panel
1. POWER & LED:
Press this button to switch ON or set the device to standby mode. Once the
device is connected with power supply the ED will illuminate and the device will
switch to ON automatically.
2. IR:
This IR window receives only the IR signal from the remote control included in the
package.
3. INPUT button and LEDs:
Press this button sequentially to switch in between the input sources rotationally.
ED will illuminate accordingly to the selected input source.
4. MENU:
Press this button to enter into the OSD menu.
5. -/ :
Press these buttons to scrolled down and up in the OSD selection.
6. ENTER:
Press this button to confirm the selection. Press this button together with – to switch
output timing to 720p@60 instantly. Press this button together with + to switch
output timing to XGA (1024x768) instantly.
Rear Panel
1. SERVICE:
Reserved for factory use only.
2. RS-232:
Connect with PC/NB and use RS-232 command to control the device.
3. DVI OUTPUT:
Connect to DVI display for video or graphical display. Compatible with HDMI to DVI
adaptor.
4. L/R OUT:
Connect to speaker or amplifier for audio output in stereo format.
5. IN:
DVI: Connect to DVI source equipment such as PC/NB for input signal sending.
Compatible with HDMI to DVI adaptor.
L/R: Connect to source equipment’s /R output with 3.5Ø phone jack for audio
signal sending.

PC: Connect with PC/NB source equipment for video signal input with D-Sub 15pin
cable.
CV L/R: Connect to source equipment such as video/DVD player for both video
and audio signal sending.
SV L/R: Connect to source equipment such as video/DVD player for both S-Video
and audio signal sending.
6. DC 5V:
Plug the power adaptor included in the package and connect it to the AC wall
outlet for power supply.
Remote Control
1. POWER:
Press this button to switch ON or set the
device to standby mode. Once the device is
connected with power supply it is on
automatically.
2. CV/SV/PC/DVI:
Press these hot keys to switch input source
instantly.
3. EXIT:
Press this button to exit the menu or the
current selection under OSD.
4. MENU:
Press this button to enter into the OSD menu.
5. RESET:
Press this button to set the device back into
the factory default setting.
6. AUTO ADJUST:
Press the button to optimize the positioning of
the picture (picture centering) on the screen.
7. OK & ▲▼◄►:
Press OK to confirm the selection or press the
arrow buttons to scrolled in the OSD
selections.
RS-232 Protocols
Scaler Remote
PIN Assignment PIN Assignment
1 NC 1 NC
2 TX 2 RX
3 RX 3 TX
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
NC NC
9 NC 9 NC

Baud Rate: 9600bps
Data bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
RS232 Commands
Command Description Content
S SOURCE 1~4 Select input source DVI(1) / VIDEO(2) / SVIDEO(3)/ PC(4)
R SOURCE Inquire input source
S OUTPUT 0~25 Select output timing Native(0)/ 640*480(1)/ 800*600(2)/
1024*768(3)/ 1280*768(4)/
1360*768(5)/ 1280*720(6)/
1280*800(7)/ 1280*1024(8)/
1440*900(9)/ 1400*1050(10)/
1680*1050(11)/
1600*1200(12)1920*1080(13)/
1920*1200(16)/
480p(17)/ 720p 60(18)/ 1080p 60(19)/
1080i 60(20)/
576p(22)/ 720p 50(23)/ 1080p 50(24)/
1080i 50(25)
R OUTPUT Inquire output timing
S SIZE 0~6 Select output size OVERSCAN(0) / FU (1) /BEST FIT(2) /
PAN SCAN(3)/ ETTER BOX(4) /UNDER
2(5) / UNDER 1(6)
R SIZE Inquire output size
S PCAUTO I PC Mode / Auto
Setup
S CONTRAST
0~60
Contrast Setting
R CONTRAST Inquire contrast
setting
S BRIGHTNESS
0~60
Brightness setting
R BRIGHTNESS Inquire brightness
setting
S HUE 0~60 Hue setting
R HUE Inquire hue setting
S SATURATION
0~60
Saturation setting
R SATURATION Inquire saturation
setting
S SHARPNESS
0~30
Sharpness setting
R SHARPNESS Inquire sharpness
setting

S NR 0~3 Noise reduction
setting
OFF(0) / LOW (1) /
MIDDLE(2) / HIGH(3)
R NR Inquire noise
reduction setting
S AUDIODELAY
0~3
Audio delay setting OFF(0) / 40ms (1) / 110ms(2)
/ 150ms(3)
R AUDIODELAY Inquire audio delay
setting
S AUDIOMUTE
0/1
Audio mute setting ON(0) / MUTE(1)
R AUDIOMUTE Inquire audio mute
setting
S KEY LOCK 0/1 Key lock setting ENABLE(0) / DISABLE(1)
R KEY LOCK Inquire key lock
setting
FW Firmware checking
S RESET 1 Pre-reset
S POWER 0/1 Power On/Off OFF(0) / ON(1)
R POWER Power Status
Note: All the RS-232 commands will be not executed unless followed with a
carriage return and LF. Commands are case- insensitive.
OSD MENU
1st Layer 2nd layer 3rd Layer
DISP AY OUTPUT
Native
640X4 0 60
00x600 60
1024x76 60
1360x76 60
12 0x720 60
12 0x 00 60
12 0x1024 60
1440x900 60
1400x1050 60
16 0x1050 60
1600x1200 60
1920x10 0 60

1920x1200 60
720X4 0P 60
1280X720P 60
1920X10 0I 60
1920X10 0P 60
720X576P 50
12 0X720P 50
1920X10 0I 50
1920X10 0P 50
SIZE (VIDEO mode only)
OVER SCAN
FULL
BEST FIT
PAN SCAN
LETTER BOX
UNDER 2
UNDER 1
MODE INFO INFO
ON
OFF
PC(PC mode only) AUTO SETUP No
YES
H_POSITION 0~60 (30)
V_POSITION 0~60 (30)
PHASE
CLOCK
WXGA/XGA XG
WXGA
RESET NO
YES
CO OR CO OR
R 0~1023
(512)
G 0~1023
(512)
B 0~1023

(512)
R OFFSET 0~1023
(512)
G OFFSET 0~1023
(512)
B OFFSET 0~1023
(512)
CONTRAST 0~60 (30)
BRIGHTNESS 0~60 (30)
HUE (VIDEO mode only) 0~60 (30)
SATURATION (VIDEO
mode only)
0~60 (30)
SHARPNESS (VIDEO
mode only)
0~30 (0)
NR. (VIDEO mode only) OFF
LOW
MIDDLE
HIGH
AUDIO
VOLUME 0~100
DELAY (L/R output
only)
OFF
40mS
110mS
150mS
SOUND ON
MUTE
SETUP
FACTORY RESET NO
YES
KEY LOCK OFF
ON
POWER SAVE OFF
ON
INFORMATION
INPUT
OUTPUT
REVISION
Note: Bold talian fonts are the Factory default setting.
( ) are default settings

Specifications
Video Bandwidth 165MHz
Input Port 1 x Composite, 1 x S-Video, ,1 x VGA,
1 x DVI, 1 x /R, 1 x R, 1 x USB (service
only), 1 x RS-232 (Control Only)
Output Port 1 x DVI, 1 x /R
Supports Input Resolution Up to WUXGA & 1080p
Supports Output Resolution Up to WUXGA & 1080p
Power Supply 5V/2.6A DC (US/EU standards,
CE/FCC/UL certified)
Dimensions (mm) 215mm(W) x 165mm(D) x 47mm(H)
Weight(g) 970g
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 5.7w
Input Resolution PC DVI/HDMI CV/SV
NTSC √
PAL √
VGA640*4 0
(@60/72/75Hz)
√ √
SVGA 00*600
(@56/60/72/75Hz)
√ √
XGA1024*76
(@60/70/75Hz)
√ √
XGA+1152* 64 @75Hz √ √
12 0*720 @60Hz √ √
12 0*76 @60Hz √ √
12 0* 00 @60Hz √
12 0*960 @60Hz √ √
12 0*1024 (@60/75Hz) √ √
1360*76 @60Hz √ √
SXGA+1400*1050
@60Hz
√ √
WXGA+1440*900
@60Hz
√ √
UXGA1600*1200 √ √

@60Hz
WSXGA16 0*1050 RB
@60Hz
√ √
1920*10 0 @60Hz √ √
1920*1200 RB @60Hz √ √
4 0I/576I √
4 0P/576P √
720P(@50/60Hz) √
10 0I(@50/60Hz) √
10 0P(@24/30/50/60Hz) √
DVI/HDMI output Resolution
Native
640*4 0@60Hz
00*600@60Hz
1024*76 @60Hz
1360*76 @60Hz
12 0*720@60Hz
12 0* 00@60Hz
12 0*1024@60Hz
1440*900@60Hz
1400*1050@60Hz
16 0*1050@60Hz
1600*1200@60Hz
1920*10 0@60Hz
1920*1200@60Hz
4 0P
576P
720P(@50/60Hz)
10 0I(@50/60Hz)
10 0P(@50/60Hz)

Connection Diagram