Converters.TV 901 User manual

3G-SDI to HDMI Scaler with
Audio (L/R + SPDIF) - ID# 901
Operation Manual

Introduction
The SDI to HDMI Scaler with Audio allows SD, HD and 3G-SDI signals to be
display on HDMI/SDI displays while ensuring high bit rates o 2.970 Gbps
gives you ast signal transmission without signal loss. For pro essional this
means that it is now easier to distribute and extend your SDI signal while
giving you the ability to display your work on the existing HDMI displays.
Further, the design o coaxial and L/R audio output allows user to output
audio with both digital and analog ormat and the loop-through 3G-SDI
design also bene it user to enjoy both SDI and PC/HD display
synchronously.
Features
•Operation at 2.970Gbps, 2.970/1.001Gbps, 1.485Gbps,
1.485/1.001Gbps and 270Mbps
•Support SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M,
SMPTE 259M-C
•Equalized and re-clocked loop output
•Alternative audio output to coaxial and analog 2CH
•Integrated audio de-embedded for max 8 channel of 48k audio
•Auto video mode detection (3G/HD/SD)
•Conver ion from SMPTE 425M level B to Level A for 1080p 50/59.94/60 4:2:2
10-bit
Applications
•Broadcast video signal sending to HDMI/SDI display
•Broadcast video signal extension
•3G SDI ignal convert into HDMI ignal

Operation Controls
and Functions
Front Panel
① POWER LED: This blue LED will illuminate when the device is connected
with power supply.
②3G LED: This green LED illuminate when the input SDI signal is with 3G ormat.
③HD LED: This green LED illuminate when the input SDI signal is with HD ormat.
④SD LED: This green LED illuminate when the input SDI signal is with SD ormat.
⑤MENU: Press this button to enter/exit the OSD menu.
⑥ENTER: Press this button to con irm your selection. Press both ENTER and –
buttons together to switch output timing to 720p instantly and press with +
buttons together to switch output timing to XGA.
⑦-/+: Press these buttons to move up or down the OSD selections.
Back Panel
① SDI IN: This slot is where you connect the SDI source output or SDI signal
sending to be display on screen.
②SDI OUT: This slot is where you connect the SDI display with SDI cable or
input source display.
③AUDIO OUT COAXIAL: This slot is where you connect the ampli ier with
coaxial cable and rom ampli ier to speaker
④AUDIO OUT R/L: These slots are where you connect the speaker or ampli ier
with RCA jack or audio signal display.
HDMI⑤ OUT: This slot is where you connect the HDMI/DVI display with HDMI
and or HDMI to DVI cable
⑥DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor
to AC wall outlet. Blue LED will illuminate when the power is ON.

OSD Menu

Displa
•Output Timings: There are total 20 timings available or user’s selection.

•Size: Adjust the display’s screen size rom Full, Over Scan, Under Scan,
Letter box or Pan scan to it the di erent timing’s display and make
the viewing become more pleasure.
Color
•Adjust screen color RGB’s Contrast and or Brightness.
SDI Audio
•Select SDI audio output rom 4 di erent group and each group
contents 2CH or rom auto which contain up to 7.1CH ollow by input
source signal.

Factor Reset
•Select YES to return to the actory setting. Factory setting on display is
at 1280 x 720p @ 60Hz with ull size screen, Color setting's actory
de ault rate are as the value in the bracket () o the OSD chart and SDI
audio is on auto.
Information
•Displaying both input source and output display timing with so tware
version.

Specifications
SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C
SDI Transmission Rates 2.970 Gbps, 2.970/1.001 Gbps, 1.485Gbps,
1.485/1.001 Gbps, and 270Mbps
Frequenc Bandwidth 225MHz/link (HDMI 1.3)
Input Port 1 x BNC (SD/HD/3G-SDI)
Output Port 1 x BNC (SD/HD/3G-SDI),
1 x HDMI, 1 x Coaxial, 2 x RCA Jack
Video Output Supports SDI: 480i, 576i
HD: 720p@50/60, 1080i 50/60,
1080p 24/25/30,
3G: 1080p 50/60
Power Suppl 5V DC/ 2.6A (US/EU standards, CE/FCC/UL
certi ied)
ESD Protection Human body model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
SDI Cable Distance 3G up to 100M
HD up to 200M
SD up to 300M
Dimensions (mm) 180(W) x 142(D) x 25(H)
Weight(g) 460
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative Humidit 20 ~ 90% RH (Non-condensing)
Power Consumption (W)4

Connection