Converters.TV 15403 Installation manual

Universal Digital/Analog Audio Converter
with Dolby and DTS Decoder - # 154 3
Operation Manual

Introduction
The Universal Digital/Analog Audio Converter with Dolby Digital and DTS
2.0+Digital Out Decoder can convert a ong Optical, Coaxial and analog
audio signals. With the ability to convert digital signals into analog and
analog signals into digital, this device supports the si ultaneous conversion
of audio for ats so when converting Optical into analog audio you can also
convert it into Coaxial. Therefore, if you find yourself li ited by ultiple
audio for ats the Universal Digital Out Decoder is the perfect choice.
Applications
• Analog audio to digital audio signal conversion (ADC)
• Digital audio to analog audio signal conversion (DAC)
• Si ultaneous digital and analog audio output
• Down ixing of Dolby Digital signals
• Down ixing of DTS 2.0+Digital signals
Features
• Dolby Digital Decoder technology e bedded
• DTS 2.0+Digital Out Decoder technology e bedded
• Integrated digital interpolator filter and Digital-to-Analog Converter
(DAC)
• Integrated Analog-to-Digital Converter (ADC)
• Supports sa pling rates fro 32 to 96 KHz
• Provides electro agnetic-noise-free trans ission
• Supports last power e ory function
• Easy to install and operate
• Co pact and elegant design
System
Requirements
Audio source equip ent such as a CD/DVD Player with connection
cable(s) and an AV receiver or si ilar device for audio output.
.

Operation Front Panel
Controls and
Functions
1. POWER LED:
The LED will illu inate green when connected to power and in red when
switched off. When connected to an AC wall outlet the unit will
auto atically turn on
2. Dolby Digital LED:
When the source is Dolby Digital for atted the LED will illu inate in red
and will re ain off if not.
3. L/R IN LED:
The LED will illu inate blue to indicate that the L/R input is selected.
4. COAX IN LED:
The LED will illu inate blue to indicate that the COAX input is selected.
5. OPTICAL IN LED:
The LED will illu inate blue to indicate that the OPTICAL input is selected.
6. DTS 2.0+ Digital Out LED In icator:
When the source is DTS 2.0+ Digital Out for atted the LED will illu inate
in red and will re ain off if not..
Right Panel
1. OPTICAL IN:
Connect to the OPTICAL output of the audio source.
2. COAX IN:
Connect to the COAX output of the audio source.
3. L/R IN:
Connect to the analog (L/R) output of the audio source with a stereo RCA
cable.

Left Panel
1. L/R OUT:
Connect to the analog (L/R) audio input of the audio syste such as a TV or
a plifier with a stereo RCA cable.
2. COAX OUT:
Connect to the audio syste 's coaxial input.
3. OPTICAL OUT:
Connect to the audio syste 's optical input.
Rear Panel
1. DC 5V:
Connect the 5V/1A DC power supply to the unit and plug the adaptor to an
AC wall outlet.
2. INPUT SELECT:
Selects the required audio source, either optical, coaxial or L/R (Analog).
3. POWER:
Push the button to turn the unit on or off. The device supports last ti e
e ory function therefore, when the p;ower supply is reconnected it will
bring up the last power status

Specifications
Input Ports 1×Optical, 1×Coaxial, 1×Analog Stereo
(L/R)
Input Format LPCM 2CH & olby igital/ TS 2.0+ igital
from Optical or Coaxial
Sample Rates 32-96KHz
Output Ports 1×Coaxial, 1×Optical, 1×Analog Stereo
(L/R)
L/R Input Impedance 47KΩ
L/R Output Impedance 600Ω
ESD Protection Human body model:
±10kV (air-gap discharge)
±6kV (contact discharge)
Power Supply 5V/1A C (US/EU standard, CE/FCC/UL
certified)
Dimensions 97mm (W)×85mm ( )×35mm (H)
Weight 108g
Chassis Material Plastic
Color White
Operating Temperature 0 ºC~40 ºC / 32 ºF~104 ºF
Storage Temperature −20 ºC~60 ºC / −4 ºF~140 ºF
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 1W
Audio Specifications
Input Audio and Output Audio Chart

Connection
Diagram