Converters.TV 912 User manual

Video & Component to HDMI
Scaler Box - ID# 912
Operation Manual

Introduction
The Video & Component to HDMI Scaler Box is specially designed for low
resolution analog CbCr contents video to be upscaled and displayed
on a HD TV/monitor. This device is suitable for iPod & MPEG 4 consumer
video devices to enjoy displayed video images on a big screen TV with
HD resolution. This device has built in resolution adjustment allowing the
user to select the best output resolution to best match the HDTV. The
Touch button panel and the hand held remote bring you the ease of
control to best enjoy your videos.
Features
• Full HQV quality de-interlacing
• Improved adaptive motion processing for difficult and poor quality video
scenes
• Temporal Noise Reduction (TNR)-Reduces noise caused by on film grain,
random noise, sensor noise and light fluctuations
• Block Artifact Reduction (BAR)-Reduces Compression block artifact
• Mosquito Noise Reduction (MNR)-Reduces mosquito noise
• Supports NTSC/PAL input video and resolution 480i/p and 576i/p
• Video output resolution up to 1080p@60Hz
• Power over USB
• Palm size with stylish design
• Demo before scale and after scale’s picture difference
• Enhance picture’s detail quality
Applications
• Analog video CVBS & COMP CbCr signal convert to digital video signal
• Analog audio signal convert to digital audio signal
• Low resolution MPEG image upscale to HD resolution and display
System
Requirements
Input video and or audio source equipment such as video player or palm size
camcorder with connection cable and output display to HD TV/monitor with
HDMI cable.

Operation Controls
and Functions
Top anel
1. Touch panel LED indicators: This is a touch panel controller, users can touch
on the symbol or letters to select source and output and the blue LEDs will
illuminate according to user’s selection.
●Top Symbol represent power: press it once to turn ON the device and
the LED will illuminate in blue, press it again to switch the device to
standby mode and the LED will illuminate in red.
●AUTO, H GH & LOW are the mode adjustment function for the output
display image. Users can select only one of the three at a time.
●1080p/720p & 480p are the output resolution selection. Users can only
select one of the three at a time.
●COMP IN & CVBS IN are the input selection. Users can only select one
of two at a time.

Front anel
1. HDMI OUT: This slot is to connect the HD TV/monitor ith HDMI cable for output
image signal.
2. IR receiver window: The IR receiver only receives the signal from the remote control
included in the package.
Rear anel
1. CVBS & Audio IN: This slot is to connect an input source device such as a camcorder
device or video player via Composite video cable.
2. COM IN: This slot is to connect ith an input source device such as DVD player or iPod
devices via composite video cable
3. USB 5V IN: Plug the 5V DC USB po er adapter (included in the package) from the AC
all outlet to the unit.

Remote Control
1. NPUT: Press this button to switch input
source in between CVBS or Component.
2. Power: Press this button to turn ON or set
the device to standby mode.
3. OUTPUT 480p/720p/1080p: Press these hot
keys to select the desire output resolution of
480p/720p or 1080p.
4. MODE AUTO/LOW/H GH: Press these hot
keys to select the output display’s image
quality.
AUTO: adjustment by the device for the
output image’s noise reduction.
LOW: adjustment on the output image’s
noise reduction.
H GH: adjustment on the output image’s
noise reduction.
5. Detail: Press this button to adjust further
on the image’s sharpness. There are total of
4 levels allowing the user to adjust for the
best output image.
6. DEMO: Press this button to demonstrate
the original output image and the image
output from the device. A green vertical
line will appear on the middle of the image
and the left side is the original picture whereas the right side is the picture with
HQV process. To move the line to left press the hot key of 480p and to move
the line to right press the hot key of 1080p. Press the button again to exit the
DEMO function.
Specifications
Frequency bandwidth 2.25Mbps
Input port 1 x CVBS, 1 x Component
Output port 1 x HDMI
Input Video Resolution 480i/p, 576i/p
Output Resolution 480p, 720p, 1080p
ower Supply 5V/1.2A USB jack (US/EU standards,
CE/FCC/UL certified)
ESD rotection Human body model:
±8kV (air-gap discharge)
±6kV(contact discharge)
Dimensions (mm) 119.5(W) x 70(D) x 25(H)
Weight(g) 200
Chassis Material Plastic
Silk Skin Color Black
Operating Temperature 0°C ~ 40°C
Storage Temperature 20°C ~60°C / -4°F~140°F
Relative Humidity 20 ~90%RH (non-condensing)
ower Consumption 4.2W

Connection