Converters.TV 662 User manual

DVI to PC Converter
ID# 662
Operation Manual

Introduction
Converts a DVI-D Digital signal input to Analog PC/RGB or HD YPbPr output. It
enables you to connect a igital DVI source to an analog PC monitor, projector or
TV. Its high ban wi th capability supports a wi e range of PC an HDTV
resolutions. Can be use easily for Professional an Private applications.
The unit is extremely small an easy to set up. Connect the DVI-D input port to the
DVI output port of your evice such as a DVD player or set top box. Then connect
the output port to the PC/YPbPr input of your evice such as an analog PC monitor,
projector or TV.
The unit has a switch which lets you select the correct output. Set the switch to
RGB when your DVI source evice is a PC graphics car or other igital RGB
source signal. Set the switch to YPbPr when your DVI source evice is a DVD
player, set-top box, or any other high efinition igital vi eo source.
Features
●Supports DVI-D input and Analog PC/RGB or HD YPbPr output.
● Supports output selection bet een YPbPr and RGB.
●Supports input/output resolution as belo :
PC: 640x480= VGA59 , VGA60, VGA72, VGA75, VGA85
800x600= SVGA56, SVGA60, SVGA72, SVGA75, SVGA85
1024x768= XGA60, XGA70, XGA75, XGA85
1152x864=MAC70, MAC75, MAC85
1280x1024= SXGA60, SXGA75, SXGA85,
1600x1200= UXGA60
1920x1200= WUXGA60(pixel-rate=154MHz)
D: 480160, 576150, 480P60, 576P50, 720P60, 720P50, 1080160,
1080150, 1080P30, 1080P60, 1080P50
Note:
1. Due to the IC didn't support Tri-level synchronies output. So
component output at 720p/1080i/1080p, the image ill shift tothe
left side of the screen.
2. If DVI source includes HDCP(High-band idth Digital Content
Protection), DVI display should not support HDCP decryption.
●Built-in EDID.

Operation
Controls and
Functions
Front Panel
1. DVI input: Connect the DVI-D input port to the DVI output port of
your source equipment such as DVD player or set-top-box. It supports
only DVI-D signal via a DVI-1 connector.
2. Po er: Plug the 5VDC po er supply into the unit and connect the
adaptor to AC all outlet.
Rear Panel
1. HD-15 D-Sub output: Connect the output port to the PC/YPbPr input of
analog PC monitor, Projector or TV.
2. YPbPr/RGB s itch:
Set the s itch to RGB hen your DVI source equipment is PC graphic card
or other digital RGB source signal. Use HD-15 to HD-15 VGA cable to
connect bet een the unit's RGB out and the RGB input of your PC monitor,
or projector. Set the s itch to YPbPr hen your DVI source equipment is
DVD player, set-top-box or other High definition digital video source. Use
a VGA to 3 RCA adaptor cable to connect the unit's YPbPr out to the
YPbPr input connector of your HDTV.
Note: When YPbPr output from HD-15 D-Sub the H-pin and V-pin ill
remain the signal at the same time.

Connection and
Installation
Pin Configuration

Specifications
Operation frequency Up to 165MHz
Input port 1 x DVI (only DVI-D supported)
Input signal Digital RGB or YPbPr bistream
Output port 1 x HD-15 D-Sub (RGBHV or YPbPr)
Output signal RGB: 0.7Vp-p 75ohm
+V: 3 to 5 Vp-p
Or Y: 1 Vp-p 75ohm
PB/Pr: 0.7 Vp-p 75ohm
Input/Output resolution PC: 640x480= VGA59 , VGA60, VGA72,
VGA75, VGA85
800x600= SVGA56, SVGA60, SVGA72,
SVGA75, SVGA85
1024x768= XGA60, XGA70, XGA75,
XGA85
1152x864=MAC70, MAC75, MAC85
1280x1024= SXGA60, SXGA75, SXGA85,
1600x1200= UXGA60
1920x1200= WUXGA60 (pixel-rate = 154MHz)
D: 480160, 576150, 480P60, 576P50,
720P60, 720P50, 1080160, 1080150,
1080P30, 1080P60, 1080P50
Power Supply 5V/2A DC (US/EU standards, CE/FCC/UL
certified)
Dimensions (mm) 76(W) x 30(D) x 92(H)
Weight(g) 182
Chassis Material Aluminum
Silk Skin Color Silver
Operating Temperature Operating from 0°C - 40°C