Converters.TV 987 User manual

1by 3 DisplayPort Extender
Splitter - ID# 987
Operation Manual

Introduction
For those who want to display large content the 1x3 DisplayPort Extender
Splitter is for you. Able to extend an image onto or 3 displays, this device is
perfect for multi-tasking, but can also split an image so the same image is
repeated on up to three connected displays. This 1 by 3 DisplayPort Extender
Splitter allows users to enjoy images or video in HD resolution up to 19 0 x 1 00
on multiple monitors from a single digital output port. The 1 by 3 DisplayPort
Extender Splitter is a useful device for extending displays and splitting images.
pplications
 Home & office display
 Gaming
Features
 Supports DisplayPort v1.1a, VESA DDM Standard,
HDCP v1.3 and EDID v1.4
 Supports link rates of .7Gbps (HBR) and 1.6 Gbps (RBR) from the
source.
 Fully HD compatible and provides full display performance with zero lag
and no display application limitations
 Does not require software updates
 Quality Lab (WHQL) testing/qualification
 Supports output resolutions up to 19 0 x 1 00
 Works with any desktop and notebook computer which have a
DisplayPort output port
 Provides exceptional Secured Content Protection with HDCP 1.3 for
digital content including video and audio
 Plug and Play
System
Requirements
Input source equipment such as a PC or any DisplayPort output device with a
DisplayPort connection cable.
Output display such as a PC monitor or any DisplayPort input display with
DisplayPort connection cable.

Operation Controls
and Functions
Transmitter
Front Panel Right Panel
① DP OUT 1~3: Connect these slots with the output displays Display port input
port in order to send a signal.
Note: It is suggested to use the same type/model of display in order to get the
optimal image quality. When the input source’s timing is matched with the
output display’s timing, the device will first extend the image according to the
numbers of the output connected. If the input sources timing does not match
with output display’s timing the device will then split the signal to match the
number of the connected display to show an identical image. (Detail
information please refer to section 8. Timing table for monitors).
Rear Panel
① On/off switch: Push this switch to turn the device on or off. The green LED
will turn on when the device is switched on.
②DC 3.3V: This slot is where you plug the 3.3V DC power supply into the unit
and connect the adaptor to an AC outlet.
③DP N: This slot is where you connect the input source equipment such as a
PC or any output device that has a DisplayPort.

Top Panel
① L NK LED: The green LED will turn on when the input source device is
connected.
②POWER LED: The green LED will switch on when the device is powered on.
③OUT 1~3 LED: The green LED will turn on when the output port is
connected with the output display.
Timing tables for monitor
The 1 by 3 DisplayPort splitter is a smart device with a built in feature that
can define which and how many monitors are connected and can transmit
the proper signal for the display. Below is the expanded timing list which is
supported by the device.
Two Monitors Mode
From PC To Monitor Vertical Refresh Rate (Hz)
3840 1200 1920 1200 60
2560 1024 1280 1024 60
2048 768 1024 768 60
3360 1050 *1 1680 1050 60
3200 1200 *1 1600 1200 60
2880 900 *1 1440 900 60
1600 600 *1 800 600 60
1280 480 *1 640 480 60
2800 1050 *1 1400 1050 60

Three Monitors Mode
From PC To Monitor Vertical Refresh Rate (Hz)
3840 800 1280 800 60
3840 1024 1280 1024 60
3072 768 1024 768 60
2400 600 *1 800 600 60
1920 480 *1 640 480 60
4080 768 *1 , *2 1360 768 60
3840 720 *1 1280 720 60
2160 480 *1 720 480 60
3840 960 *1 1280 960 60
Note:
*1. The timing is listed out in EDID extension block. Some old GPU driver may
not support it.
* . The total horizontal pixel include the active area and blank area is
large than 4096, some GPU driver may not support the timing.

Connection
Diagram

Specifications
Output Resolution 19 0 x 1 00 / 19 0 x 10 4
nput port 1 x DisplayPort
Output ports 3 x DisplayPort
Power Supply 3.3V / 1.5A DC (US/EU standards,
CE/FCC/UL certified)
ESD Protection Human body model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions(mm) 100 (W) x 70 (D) x 0 (H)
Weight(g) 90
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0°C ~ 40°C / 3 °F ~ 104°F
Storage Temperature - 0°C~60°C / -4°F ~ 140°F
Power Consumption 3W
Relative Humidity 0~90% RH (non-condensing)