Converters.TV 694 User manual

PC-HD to PC-HD Scaler
w/PC-HD pass-thru - ID# 694
Operation Manual

Introduction
PC-HD to PC-HD Scaler w/PC-HD pass-thru. Designed to upscale PC/HD input
sources to a PC/HD output with a wide range of selectable resolutions available,
up to WU GA/1080p.
The unit can take an input and scale it PC resolutions VGA, SVGA, GA, S GA,
U GA, W GA, WS GA and WU GA; or High Definition resolutions including
720p, 1080i, and 1080p.
Users can select the size of the output through the on screen display with options
including Full, Overscan, Underscan, Letterbox and Panscan. Other options
including Finetune, Position, Brightness and Contrast allow you to adjust for the
best possible picture quality.
Features
1. Scales any PC/HD resolutions to PC (VGA - WU GA)/HD (480i - 1080p) resolutions.
2. Provides output picture adjustment on contrast, brightness, hue, saturation,
sharpness, RGB (color tone) level and aspect ratio size.
3. Supports high resolution output:
PC: VGA, SVGA, GA, S GA, U GA, W GA, WS GA, WU GA.
SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p.
4. Supports YPbPr/RGBHV input/output.
Operating Functions
and
Controls
Front Panel
1. PC/HD Bypass: Bypass the PC/HD input signal.
2. Input: Connect the PC input D-Sub (15-pin) port to the D-Sub output port
of your source equipment such like PC.
Rear Panel

1. Power: Plug the 5VDC power supply into the unit and connect the adaptor to
AC wall outlet.
2. PC/HD Output: Connect the PC output D-Sub (15-pin) port to the D-Sub input
port of your display.
. Menu Button: Press the MENU button to bring up OSD operation menu. (See
section "4. OSD Operation" for reference.)
4. +/- Button:
1. On the first tier of OSD menu, use + and - buttons to move up/down the
highlight item for selection.
2. Once the desired option is selected, use + and - buttons to toggle between
setting values.
Note: Reset: Press [MENU] and then [ - to switch to 480p mode. Press [MENU] and
then [ + ] to switch to GA mode.
OSD Operation
1 st Tier Option 2
n
d Tier Option Adjustment
CONTRAST - 0 - 100 of Contrast Level
BRIGHTNESS - 0 - 100 of Brightness Level
FINETUNE
- HUE
0 - 100 of Hue Level
- SATURATION
0 - 100 of Saturation Level
- SHARPNESS
0 - 100 of Sharpness Level
- E IT Ba ck to 1st Tier
COLOR - RED 0 - 100 of Red Color Level
- GREEN 0 - 100 of Green Color Level
- BLUE 0 - 100 of Blue Color Level
- E IT Ba ck to 1st Tier
SIZE FULL / OVERSCAN / UNDERSCAN /
LETTERBO / PANSCAN
OUTPUT NATIVE / VGA / SVGA / GA /
S GA /U GA / W GA / WS GA /
WU GA / 480i / 480p
/720@60Hz / 10801@60Hz /
1080p@60Hz / 576i / 576p /
720p@ 50Hz / 1080i@50Hz /
1080p50Hz
OSD - HPOSITION 0 - 100 of OSD Horizontal Position
- VPOSITION 0 - 100 of OSD Vertical Position
- TIMER 0 - 100 of OSD Existing Time (sec.)
- BACKGROUND 0 - 100 of OSD Transparent Level
- E IT
Ba ck to 1st Tier
INFORMATION -
SOURCE (Input Interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
E IT Close OSD Menu

Support Resolution
I n p u t/ O u t p u t
Resolution
PC INPUT PC OUTPUT
PC/HD PC/HD
4801/5761 (NTSC/PAL) V V
480P/576P V V
720P@(50/60) V V
1080i@(25/30) V V
1080P@ (50/60) V V
VGA@(60/72/75/85) V V@60
SVGA@ (56/60/72/75/85) V V@60
GA@(60/70/75/85) V V@60
S GA@ (60/75/85) V V@60
U GA@60 V V
W GA@60( 1 280x800) V V
WS GA@60( 1 680x1050) V V
WU GA@60(1920x1 200) V V
Note: 1920 x 1200 = Reduced Blanking WUXGA
Installation
Specifications
Input ports 1 x PC
Output port 1 x PC
Power Supply 5V/2.6A DC (US/EU sta dards, CE/FCC/UL
certified)
Dimensions (mm) 157(D) x 102(W) x 25(H)
Weight(g) 332
hassis Material Alumi um
Silk Skin olor Silver
Operating Temperature Operati g from 0°C - 40°C Power
onsumption 10W (max)