Converters.TV DV-2001 User manual

Bi-directional DV-analog Converter
(DV-2001)
Operation Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Introduction
The DV-analog converter provides real-time, bi-directional conversion of DV and
Analog video and audio.
Precautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•Encoding mode: Analog to DV.
•Decoding mode: DV to Analog.
•Video Support: NTCS (4:1:1); PAL (4:2:0), DV 25 format (25Mbps data transfer
rate)
•Audio Support: 48, 44.1, 32 KHz
•Compatible with DV, Digital 8, Video 8, Hi8, VHS, S-VHS, VHS-C, S-VHS-C
formats.
•IEEE 1394 (iLink) DV interface.
•Digital comb filter ensures best video quality.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Operation Controls and Functions
Front Panel
1. Po er LED- This LED will illuminate when the power has been turned On.
2. Reset Button- Decode mode (DV to Analog) will be obtained when you push the
reset button.
3. Mode Selection Button- Press the button to select the Encode mode (Analog to
DV) or Decode mode (DV to Analog).
4. Analog-In Indicator- This indicator will light up when Encode mode has been
selected.
5. DV-In Indicator- This indicator will light up when Decode mode has been
selected.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Rear Panel
1. Po er- This is the main power On/Off switch.
2. DC Po er Supply- This is the power supply input port. Connect the port to the
power socket using a DC 12V 800mA Center positive power supply.
3. DV In/Out- Firewire/1394 (4 pin) In/Out.
4. Stereo Audio Input- These are the left and right Stereo Audio Input ports. 2 x
RCA connector cables are used for connection.
5. Video Input- This is the Composite Video input port. Connect the port to your
source device using an RCA connector.
6. S-Video Input- This is the S-Video input port. Connect the port to your source
device using a 4-pin mini Din connector.
7. Stereo Audio Output- These are the left and right Stereo Audio Input port. 2 x
RCA connector cables are used for connection.
8. Video Output- This is the Composite Video Output port. Connect the port to
your source device using an RCA connector cable.
9. S-Video Output- This is the S-Video Output port. Connect the port to your
source device using a 4-pin mini Din connector cable.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
Composite Video or S-Video In and connect to camcorder (DV):
-Connect the camcorder to the DV In/Out port (Number 3 on the rear panel).
-Connect your VCR or DVD to the L + R Stereo Audio input ports (Number 4 on the
rear panel) as well as the Composite Video (Number 5 on the rear panel) or S-Video
input ports (Number 6 on the rear panel).
Camcorder (DV) In and connect to TV:
-Connect the camcorder to the DV In/Out port (Number 3 on the rear panel).
-Connect your TV to the L + R Stereo Audio output ports (Number 7 on the rear
panel) as well as the Composite Video (Number 8 on the rear panel) or S-Video
output ports (Number 9 on the rear panel).
Camcorder (Composite video or S-Video) In and connect and connect to PC/Mac
(DV):
-Connect your PC/Mac to the DV In/Out port (Number 3 on the rear panel).
-Connect your camcorder to the L + R Stereo Audio input ports (Number 4 on the rear
panel) as well as the Composite Video (Number 5 on the rear panel) or S-Video input
ports (Number 6 on the rear panel).
Once all connections are complete please connect the power supply provided to the
power socket.
Specifications
Inputs - Composite Video (RCA), 1.0 Vp-p 75 ohm.
- S-Video (Mini-Din), Y/C in, 4-pin 75 ohm.
- Stereo Audio (2 x RCA).
- Firewire/1394 (4-pin).
Outputs - Composite Video (RCA), 1.0 Vp-p 75 ohm.
- S-Video (Mini-Din), Y/C in, 4-pin 75 ohm.
- Stereo Audio (2 x RCA).
- Firewire/1394 (4-pin).
Systems NTSC or PAL (On separate box)
Dimensions 200 ( ) x 140 (D) x 40 (H) mm
Weight 1.1 Kgs
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv